I wanted to express my gratitude for your incredibly informative video. Your detailed explanation made the content easy to understand, and I appreciate the effort you put into providing a comprehensive overview. Thank you for sharing your knowledge and expertise. I'll be sure to try out the suggestions you provided later this evening. Looking forward to more insightful content from your channel!
You have to make sure the battery BMS match the 80A the co troller would be pulling … another word make sure your battery BMS is minimum 80a capable …. Personally I would go 100-150A to be safe
Hi. 15kwatt? Wow.. 60ah battery? Interesting. If you have any questions feel free to ask. Im not an expert but after owning my 12kwatt for 3 years a learned many things.
Nice video thanks. I have a similar problem Bafang 750W 48V mid drive, power drops out after a slight throttle. Batt reading 52V before I give throttle then reads zero after drops out. I also hear a ticking sound coming from the inside of battery when I turn on the display…. I will open and check condition of the cells, might be one or more are bad. Any advise on who makes a good Batt. Thanks
There is a bunch of grips they sell for the suron in Amazon and they fit this bike too. Many options not sure what you looking for. Im planning to replace them too but im looking for hanldes with led at the end cap. I ride my bike when is dark and i need more side lighting.
Great job in finding the problem questione . . . you found out what the problem is . . . are you going to buy a original new batt pack from the bike maker . . . and at what cost . . .
Yes i found the problem. I think ill start building my own battery. A new battery pack price is around $1.3k.. amazon probably $2k.. i rather built it myself. Not that difficult but it is dangerous..
Can u recommend me where to buy a battery on taobao?? Because my 60v 25ah nt working, i nt sure why because when i charge it is green light but when i plug in it show 0v, i nt sure is my bms burn off or dead cell
guys pleas help, i have the same bike, i try to mess with the programing and now it wont top out at 53 mph and the speed doesnt match nether, i try to reserch and found nothing, pleas anyone that can go through there program and tell me what im supose to program it to pleas help me.
I wanted to express my gratitude for your incredibly informative video. Your detailed explanation made the content easy to understand, and I appreciate the effort you put into providing a comprehensive overview.
Thank you for sharing your knowledge and expertise. I'll be sure to try out the suggestions you provided later this evening. Looking forward to more insightful content from your channel!
Thank you.
Good stuff to know. Glad you got it figured out. I've only got 5000 watt with 80 amp controller, so hopefully I won't have this problem?
Thanks.. hopefully you won't. But if you do, you know what to check. We are here to help each other if you got any questions.
You have to make sure the battery BMS match the 80A the co troller would be pulling … another word make sure your battery BMS is minimum 80a capable …. Personally I would go 100-150A to be safe
I am so glad you found a work around.
Me too!
Hey thanks alot I just ordered a 15000watt ebike that comes with a 72.v60ah 200amp controller so I hope everything goes good 👍 😅
Hi. 15kwatt? Wow.. 60ah battery? Interesting. If you have any questions feel free to ask. Im not an expert but after owning my 12kwatt for 3 years a learned many things.
Yes you have and you did a good job 👏 👍 👌 😀
Can you let me know whats the dimensions if the battery box? I was wondering whats the maximum battery u can build for this bike frame .
Nice video thanks. I have a similar problem Bafang 750W 48V mid drive, power drops out after a slight throttle. Batt reading 52V before I give throttle then reads zero after drops out. I also hear a ticking sound coming from the inside of battery when I turn on the display…. I will open and check condition of the cells, might be one or more are bad. Any advise on who makes a good Batt. Thanks
That ticking noise could be a relay or the BMS.. is that the original battery that came with the bike?
Great video, thank you very much!
You are welcome. Here to help the ebike community.. thank you too.
I'm going to build lipoe4 Batt 10K Cycles Much Cheaper in the Long Run.. Good Video Thanks!
Nice.. good luck.
Hey was wondering if you know any good grips for the bike, I also got a cs20 and was trying to find some grips to replace the ones it came with
There is a bunch of grips they sell for the suron in Amazon and they fit this bike too. Many options not sure what you looking for. Im planning to replace them too but im looking for hanldes with led at the end cap. I ride my bike when is dark and i need more side lighting.
Do you have a link for where you purchased this from
shweiyi.m.en.alibaba.com/index.html?wx_navbar_transparent=true&tracelog=sns_minisite
Thats the company where i got it from.. there are more companies that sell them too. Search around at your convenience.
Got any link? Because the link is nt working
Great job in finding the problem questione . . . you found out what the problem is . . . are you going to buy a original new batt pack from the bike maker . . . and at what cost . . .
Yes i found the problem. I think ill start building my own battery. A new battery pack price is around $1.3k.. amazon probably $2k.. i rather built it myself. Not that difficult but it is dangerous..
🙏🙏🙏🙏👍👍👍👍thanks 👍 I'm looking forward for more video maybe it will help me pull the trigger on 1 this babe
Thanks for your support.. I'll be uploading other stuff on this bikes..
Can u recommend me where to buy a battery on taobao?? Because my 60v 25ah nt working, i nt sure why because when i charge it is green light but when i plug in it show 0v, i nt sure is my bms burn off or dead cell
Sounds to me is the bms output..
I've tried turning it on while it's plugged in and after disconnecting the battery and still no luck
Probably blown fuse on the positive battery cable
guys pleas help, i have the same bike, i try to mess with the programing and now it wont top out at 53 mph and the speed doesnt match nether, i try to reserch and found nothing, pleas anyone that can go through there program and tell me what im supose to program it to pleas help me.
I can check it on mine and ill send you my parameters..
@@dennis_503_gutierrez pleas
How is your bike doing now
Hi thanks.. the bike is working perfectly. A simple change on the speed controller made the difference.
What app is it?
MQCON