Installation step by step of QUAIFE LSD on 02M 02Q gearbox VW SEAT SKODA TDI HELDERPUTO SKILLATURBOS
HTML-код
- Опубликовано: 27 авг 2024
- Installation step by step of QUAIFE LSD on 02M 02Q gearbox.
On this video I show all the steps to install the lsd on the gearbox.
VW SEAT SKODA TDI HELDERPUTO SKILLATURBOS.
Pro tip to make your life easier next time. Once you take the heads off the rivets. use a punch to drive out the remaining parts of the rivets, then use heat on the ring gear. Will press off much more easier.
Third pro tip i'll give you, When replacing the outer shells of the bearing from the casing, use a heat gun to heat the casing, outer shells will fall out with very little effort.
You should sell merchandise. I would put your channel on my car. This channel is very educational, one of the best channels on RUclips.
Thanks 🙏
@@HelderPutoPerformance have a great weekend. I will spend my weekend watching all of your videos learning how to build PD. Maybe i will buy Volkswagen in 6 months. Your videos are very helpful.
I would be interested in buying stickers or merchandise from you.
Thanks.
Fourth pro tip for you is, the shims behind the bearing outer shells are there to set preload on the diff bearings. When ever new bearings are replaced, the pre load needs to be redone as no bearing is the same. VW/Audi Specify that you need to have 0.30mm of preload on the bearings. You need to measure this using a dial gauge. This is not the correct way to be doing this job. It will be functional but not correct.
Hi mate for me longest the diff don’t have play is fine but thanks to let me know
This is correct. There is a different video showing this. Basically you measure the “play” distance with a dial gauge, then add 0.3mm to it, then add new shims according to that. Correct?
Literally needed this video so bad😂 thank you 🙏🏼
These Portuguese dudes eh, masters of diesel!
I always wondered why so many people pulled them apart the other way, leaving the gears in makes it so much easier.
Best build ever 💪 I'm enjoying this
Need one of these for my car! Thanks for this video it'll help.
Second pro tip to make your life easier. heat the ring gear up and use lighter gas on the diff, ring gear drops straight on.
Thanks
I had same issue few weeks back, dark side very quickly sorted issue, the bearings you've received are o2j rather than o2m
Can you also make a video or have a video about how to install the 02M / 02Q transmission reinforcement brace? Its the brace that ties two ends of the transmission together.
i don't understand why OEMs still using open-diffs or clutch-LSDs with all complicated traction system instead of the Wavetrac LSD or at least Quaife LSD that can do auto lock & auto torque balance precisely for both streets & off roading with less part & low maintenance cost?!
Great video 👍
Thanks for the video bro 👍
very nice my friend 👍
whats the size of new bearing?
Does this LSD “Upgrade” make the Transmission a true AWD (on all the time) instead of just part-time AWD (when the computer senses traction slipping)??
Great video mate straight forward and easy to follow👌🏻 would a 6 tonne press be enough to do the lsd or would need a press like 10 tonne
6 tonne will be fine mate thanks for watching 👏
Está bom !!!
Isso quer é carvão a fundo
Top top.. Nice 👌💪
Hi. Thanks for the video. What kind of gear oil do you use for this?
Yessss !!
Is this same box on vw transporter t5 1.9 ??
I don’t know 🤷♀️
Nice work mate. Hey I'm struggling re installing the shift tower back into the case. Do you have any good tips to help. I'm struggling
Lpeças de luis Rosado.
Ele tem boas ferramentas e baratas .
Diz que vais da minha parte.
Artur Esperança
podia ter dado calor na coroa para ser mais fácil entrar no lsd
Mais um grande video,nao ha maneira de fazer um antoblocante artesanal?
Boas amigo já fiz un tens k ver aí nós meus vídeos
Can I put an fjw gearbox on my a3 8l asz? I would like to have longer ratios. Can i swap the complete trasmission of an ibiza into mine?
Yes you can but you need to change the bell housing on the gearbox
@@HelderPutoPerformance thanks, so only Bell housing, the dogbone mount?
@@doubleclutching4411 original dog mount
Is eliminating endplay important? Or no?
Yes
Good video.. which oil are you using? 75w140?
75w90
@@HelderPutoPerformance I already installed but I put 75W140 is there any problem?, My country is super hot at the summer.
@@khaled7965 it’s ok not going to damage
@@HelderPutoPerformance great.. thanks mate 👍
Hi there, if we are using a 4wd 02M in 2wd mode (without the transfer case) do we need to order 2wd quaife or 4wd quaife?
2nd
But remember, we use blanking plate from Epytec and custom 02M driveshafts from Epytec. From what I notice, we need the 4wd LSD order not 2wd.
It would be the same as using stock diff (toothed) with a blanking plate.
Hope I’m right because I already ordered the 4wd LSD version (toothed shaft)
How do you re-shim if you have too much play?
You cam buy the shim separate
Hélder preciso de ajuda.
O meu a3 8l de 99 e tem uma caixa EBF.
Deram me uma caixa de um a3 8l de 98, mas a caixa é uma DEA ...
São iguais mas o seletor é diferente. E agora o que fasso para conseguir adptar os meu cabos no seletor da caixa?
Ja agora alguém me sabe dizer se o racio das caixas e diferente ?
O racio vai ser diferente de serteza .
Tens que ver se consegues trocar o seletor para a outra caixa se não der não vale a pena inventar
What oil Brand and Spec did you put after in?
Which gear box is that is that a dsg ?
No
Y
I have same gearbox do you know how i can check if it has lsd without splitting the gearbox? Thanks
You need to split the gearbox