Using the toothpick against the side of the part like that is brilliant. I use a mm ruler to measure length of lines, but distance to the edge is much harder. Great advice!
I was always wondering how to make it symmetrical when scribing.. Then boom! You just literally lay it down on us.. Thank you for this bro.. I follow you on IG btw
Your videos are easily the best instruction I've ever seen when it comes to detailing models,thank you for taking the extra time for the english subtitles. Keep up the amazing work :)
I can think of 2 other ways. 1. Using tracing paper to create an impression, use this to create a template out of card stock. Tape template to piece trace panel lines on piece or cut with template on piece. Or 2. If you happen to have a crafty wife who owns a brothers scan and cut, photo copy the scribed part, take copy run it thru the brothers scan n cut, cut shape out of vynil, apply to piece and mark it out or cut onto of vynil. Just my 2 cents
This is exactly was I was looking for. Thank you for the great tutorial! I was using 2 pieces of masking tape before and sketching the mirrored image but I found I couldn't line it up properly before. This will help big time xD
건아터 먼저 영상을 좋게 봐주셔서 감사합니다^^ 유튜브를 처음 시작할때에도 저역시 그런 마음으로 시작했습니다^^ 다른 컨텐츠 보다는 제가 하는 방법이나 노하우를 보여주면서 서로 공유하고 쉽게 따라해보실수 있도록 스킬중심에 컨텐츠를 하기로 마음먹고 시작했습니다^^ 뛰어난 실력은 아니지만 조금이나마 도움드리고 싶어서요^^ 응원해주시는 만큼 초심 잃지 않고 열심히 하겠습니다. 좋은말씀 감사합니다^^
Depending on the shape of the parts, this may or may not be possible. In the case of a round surface, I also think about it. I'll share it when I think of a good way to do that. Thanks 😀
@@RAVIPLA for me it's always a challenge. I myself tried it with a few ways (copying with masking tape, transparent tape, ordinary rulers. Or just draw the lines with pencil by eye). And it weren't a 100% success, lol
I'd like to see official English subtitles!! The auto-generated ones are OK, but it certainly isn't perfect. From what I could tell, it's a great video! Really makes me want to try to draw my own panel lines now.
Your skill is unrivaled. Thank you for doing these videos. Fed gonna be using your method. Where can I get those tiny clear parts you use as scribing guide?
You are the master of gunpla!! So inspiring to watch your work, and I learn so much! I like painting my panel lines with an accent color like red to simulate the "psycho-frame" effect, but often get a little paint on the Gundam that's very hard to clean off. Do you have any advice for painting the panel lines after painting the Gundam without ruining the paint?
I paint with lacquer. The panel line is then painted with enamel. Clean the area around the panel line with enamel thinner. The lacquer paint will not be erased.
There is another more simpler way Take paper glue stick and oil paper, use glue stick its not really sticky and easy to clean from plastic Glue the oil paper to part u wanna copy from Trace it with pencil If u done.. glue it to part u want to transfer Retrace it with scribe or hoby knife Save u more energy
Do you have any video or photos of this? I think it's a good idea. but I have to translate this so it is hard to understand correctly. 😭 Thank you for sharing. 😄👍
I can share u some photo of me doing it... might not the best. Hopefully u can understand cuz im not native english speaker. I will contact u via email Hope u can blog or make video of it once u get it
Thats looks like symmetrical with machine, awesome method, how do you find that method? Also that method u use on flat surface also same on rounded surface liks, sazabi leg, etc. Im wonder 🤔
That method may not be suitable for a round surface. There are many different shapes of parts, so there are many different methods. I also apply to that situation.
@@RAVIPLA no problem, cause you are the first one that make youtube about scribing that i found and really helpful, even u speak in korean, but you add english subtitle on it about important part, thats awesome 👍
Have you tried the tape method? Lay down masking tape on the scribed part, use a pencil to get an impression of the lines on the tape, and use the impression to duplicate the panel lines. instagram.com/p/BkzubrzhKlR/
◼︎ 제작의뢰 및 완성작 구매 문의 (Commission & Purchase Inquiry)
jackers7@naver.com or instagram DM (ravi_pla)
Notice - blog.naver.com/jackers7/222348230829
Finally a tutorial other then just being told to eyeball it. Thank you so much.
You're welcome. bro. 😀
yeah, now all I need to do is learn Korean...
@@Jonathansa01 I still lack understanding of English. I have to study English more. 😅
Nah! I was only joking bro, your doing a good job! OH! I might have work for you, I will send you an email ;-) @@RAVIPLA
I was just gonna say "or you can eyeball it." But yeah, not everyone is good at eyeballing.
You really go far and beyond with these tutorials , thank you for all the knowledge you share with us!
Using the toothpick against the side of the part like that is brilliant. I use a mm ruler to measure length of lines, but distance to the edge is much harder. Great advice!
It was difficult to measure the length from the end of the part.This method helps. Thanks 😃
I was always wondering how to make it symmetrical when scribing.. Then boom! You just literally lay it down on us.. Thank you for this bro..
I follow you on IG btw
Thank you for watching the video well. 😄
Your videos are easily the best instruction I've ever seen when it comes to detailing models,thank you for taking the extra time for the english subtitles. Keep up the amazing work :)
I can think of 2 other ways.
1. Using tracing paper to create an impression, use this to create a template out of card stock. Tape template to piece trace panel lines on piece or cut with template on piece.
Or
2. If you happen to have a crafty wife who owns a brothers scan and cut, photo copy the scribed part, take copy run it thru the brothers scan n cut, cut shape out of vynil, apply to piece and mark it out or cut onto of vynil.
Just my 2 cents
I have to translate your words, so it's hard to understand them correctly. 😅 But I think it's a good way. Thank you for sharing. 😄👍
The best panel line teaching ever had.
사자비 완성 기념으로 다시 한번 정주행 중입니다 친절한 설명 감사드려요
This is exactly was I was looking for. Thank you for the great tutorial! I was using 2 pieces of masking tape before and sketching the mirrored image but I found I couldn't line it up properly before. This will help big time xD
I'm glad I can help you. thanks 😀
@@RAVIPLA keep up the great work. Your work is amazing. I follow you on Instagram too. You'll have a huge following soon xD
Tyrone Pinson I will keep trying. I hope it will be as you say. 😀 thanks 😄
정말 좋은 정보입니다. 프라판 잘라서 썼었는데 이게 훨 좋으네요. 당장 디바이더 2개 샀습니다. 감사합니다
파츠 모양에 따라 맞지 않는 방법 일수도 있지만, 응용해서 같이 사용하면 대칭이 아주 잘 맞더라고요^^ 좋게 봐주셔서 감사합니다 ^^
Brilliant tutorial, will definitely be trying this out. Keep up the great content.
okay, Thanks 😄
Thank boss for this video I am a new subscriber, this is the best explanation I have come across
0:37 ”You can’t be very precise because human”, finally someone actually admits that!.
구독 눌렀습니다!!숨은 실력자 이신듯~~설명도 참잘하시고 좋네요...순간 조회수나 구독자에 현혹되어 어설픈 리뷰나 신제품소개로 외도하지마시고 스킬업을 중점으로 꾸준히 도색과 디테일업에 집중해주시면 속도는 좀 느릴지 몰라도 골수 매니아들의 두텁고 오래가는 구독자들이 계속 늘어갈거라고 봅니다!! 화이팅하세요..!!!
건아터 먼저 영상을 좋게 봐주셔서 감사합니다^^ 유튜브를 처음 시작할때에도 저역시 그런 마음으로 시작했습니다^^ 다른 컨텐츠 보다는 제가 하는 방법이나 노하우를 보여주면서 서로 공유하고 쉽게 따라해보실수 있도록 스킬중심에 컨텐츠를 하기로 마음먹고 시작했습니다^^ 뛰어난 실력은 아니지만 조금이나마 도움드리고 싶어서요^^ 응원해주시는 만큼 초심 잃지 않고 열심히 하겠습니다. 좋은말씀 감사합니다^^
Okay, I am going to buy 2 compasses and will definitely try your method
Lain Lain It is a method that can be applied in various ways. 😀😁
Your planning line skill is very good
Thank you for the compliment. 😀
that's really awesome toturial, thank you! But what if the surface isn't flat like here? Like rounded.. is there any other good method for this?
Depending on the shape of the parts, this may or may not be possible. In the case of a round surface, I also think about it. I'll share it when I think of a good way to do that. Thanks 😀
@@RAVIPLA for me it's always a challenge. I myself tried it with a few ways (copying with masking tape, transparent tape, ordinary rulers. Or just draw the lines with pencil by eye). And it weren't a 100% success, lol
How to duplication the panel lines is very difficult. 😭
Awsome guide, your work is really inspiring
I'd like to see official English subtitles!! The auto-generated ones are OK, but it certainly isn't perfect.
From what I could tell, it's a great video! Really makes me want to try to draw my own panel lines now.
Please keep the videos coming! We really appreciate them!
Please wait.😭😀
RAVI PLA Take your time 😁
너무 유익한 영상이었습니다. 잘봤어요.
사람 손이 완벽하지 않다 하셨는데 방법만 봐서는 이론상 완벽한데요? 좋은거 배우고 갑니다!
Fantastic tutorial, thank you very much !
You are very talented. Thank you for sharing.
Thanks for watching :D
amazing work as always, my question is how do you come up with your panel scribing designs?
You should do a video where you explain in which order scratch the lines. Which one goes first, which one goes last etc.
You mean the sketch sequence? Or are you referring to the sequence of panel lining?
@@RAVIPLA The sequence of panel lining.
Koutetsu Jeeg It's a symmetrical course, so I'm past the panel lining. I'll show you the process next time. Thank you for your feedback. 😀
Your skill is unrivaled. Thank you for doing these videos. Fed gonna be using your method. Where can I get those tiny clear parts you use as scribing guide?
It's a transparent guide tape. (HIQPARTS carving guide tape 3mm)
RAVI PLA thank you sir!
You are the master of gunpla!! So inspiring to watch your work, and I learn so much! I like painting my panel lines with an accent color like red to simulate the "psycho-frame" effect, but often get a little paint on the Gundam that's very hard to clean off. Do you have any advice for painting the panel lines after painting the Gundam without ruining the paint?
I paint with lacquer. The panel line is then painted with enamel. Clean the area around the panel line with enamel thinner. The lacquer paint will not be erased.
@@RAVIPLA Thank you so much! I had been using lacquer for everything. I didn't realize the enamel thinner wouldn't hurt lacquer
Strong rubs or edges may be erased. You have to be careful.
This was really helpful. Thank you! 감사합니다
There is another more simpler way
Take paper glue stick and oil paper, use glue stick its not really sticky and easy to clean from plastic
Glue the oil paper to part u wanna copy from
Trace it with pencil
If u done.. glue it to part u want to transfer
Retrace it with scribe or hoby knife
Save u more energy
Or regular paper is fine if u r lazy
And use gel pen.. so u can see thru ur lines
Do you have any video or photos of this? I think it's a good idea. but I have to translate this so it is hard to understand correctly. 😭 Thank you for sharing. 😄👍
I can share u some photo of me doing it... might not the best.
Hopefully u can understand cuz im not native english speaker.
I will contact u via email
Hope u can blog or make video of it once u get it
Aeons Ryuji okay. I hope I can understand that. 😅
I sent you an e-mail reply. 😄 Thank you so much 😁
⭐️ most excellent ! 😎 ⭐️ Thankyou 👍
정말 유익한 정보를 상세히 알려주셔서 고맙습니다.^^
별말씀을요^^ 감사합니다.
아.... 이걸 패널라인 긋기 전에 봤어야 했는데
하는 중간에 봐버렸네요 ㅠㅠ
디바이더가 콤파스처럼 생겼는데
같은거 아니겠죠? (검색해보겠습니다 ㅎㅎ)
좋은 영상 만들어주셔서 감사합니다 :D
최고의 강좌!!
amazing video production ! thank you for the advice and videos.
Thanks 😃
Thank you so much teacher 🙏🏻
좋은정보 감사합니다!!!
thanks for the great tip 🙂
Idk if u r still making youtube video but can u make 1 video like this but on the curved surface?
정말 유용한 팁입니다. 영상 잘 봤습니다~
도움되셨다면 다행이네요 ㅠ 상황에 맞게 응용하면 나름 괜찮은 방법 같아서 만들어 봤습니다 ^^ 봐주셔서 감사합니다 ^^
와..정말 좋은 방법이네요..개안하고 갑니다~ 영상 감사합니다~
좋게 봐주셔서 제가 감사하져 ^^
Looks great! What kind of tape are you using for the guide? It doesn't look like dymo tape
HIQ PARTS CARVING GUIDE TAPE (3mm) - Made In Japan . Thanks 😀
There's a way easier way than measuring or using a tool .
Heroes Workshop use masking tape? If there's a good way, please share it. It's too hard to duplicate the panel lines 😭
Very good 😍😘
I want to cut the curve line, how can do this.. thanks
디바이더 어디꺼 쓰시는지 알려주실수 있나요?
너무 좋은 꿀팁이네요..!!
응용만 잘하면 괜찮은 방법이라 생각합니다 ^^ 감사합니다 ^--^
미국에 사는데 패널라인 작업한거보고 너무 하고 싶은데요..
혹시 제대로 하려면 무엇을 사야되는지 품목좀 여쭤봐도 될까요? 팔지는 모르겠지만 최대한 사서 해봐야겠네요
i learned a lot from this... great video... =)
I'm glad I can help you. 😀😁 Thanks :)
이걸 ㅋㅋㅋ 언제 다하고ㅠ있을까요 ㅠㅠ 프로 모델러 아니면 ㅠㅠ
Excelente. Muchas gracias!
Gracias por verme bien 😄
How do you determine how you want your panel lines to look? Do you have a specific style or just make it up as you go?
I decide the panel line by sketching as I can think of it. 😀
Awesome 🔥
Thats looks like symmetrical with machine, awesome method, how do you find that method? Also that method u use on flat surface also same on rounded surface liks, sazabi leg, etc. Im wonder 🤔
That method may not be suitable for a round surface. There are many different shapes of parts, so there are many different methods. I also apply to that situation.
This is the method I thought and used it.
@@RAVIPLA i see, more and more want to know about ur work, keep up the good work and ill wait u next video man, 👍👍👍
Thank you for always liking the video. 😁😀
@@RAVIPLA no problem, cause you are the first one that make youtube about scribing that i found and really helpful, even u speak in korean, but you add english subtitle on it about important part, thats awesome 👍
와!!! 진짜 꿀팁이네요!!! 잘 배우고 갑니다. 콤파스 주문하러 ㄱㄱ
Lemon BongBong 감사합니다 😊
예전에 저는 1개로하다가 던졌는데 왜2개로쓸생각을 안했을까요 ㅎㅎ
아무튼 꿀팁 감사합니다 ㅎㅎ
좋아요 꾸욱누르고 갑니다
푸른뮤즈 파츠 모양에 따라서 응용만 잘하면 괜찮은 방법이라 생각합니다~ 좋게 봐주셔서 감사합니다^___^
Any links to the tools they used?
패널라인 테이프 브랜드마다 뚜께 차이가 있나요?처음이라 쉽지가 않네요 ~ ㅠㅜ 감사합니다 ^^
중국제품도 가지고 있는데 제가 주로 사용하는 HIQ PARTS 제품보다는 조금 얇더라고요. 근데 접착력은 강해서 병행하며 쓰고 있습니다.
Thanks bro ravi 🙏🙏🙏🙏
Fadly Fadlan thanks for watching bro 😁
Where can you get the clear film for laying the new lines?
Watch this video about the tape. from 6:39 ruclips.net/video/uhy1AwiMbrU/видео.html
how many time do u scribe to get a clean panel line?
There is no set standard. Scrape until desired depth is reached.
이토록 정밀한것을,,,
약간 어나더 클라쓰,,네요
좋게 봐주셔서 감사합니다.
Loving it..❤
Thanks 😄
천재네
그냥 이렇게 저렇게 해보다가 터득한 방법입니다 ㅎ 감사합니다 ^^
오오 디바인더(메모) 좋은정보군요 ㅎ
정우택 상황에 따라 응용하면 괜찮은 방법이라 생각합니다^^
brilliant, thank you - gamsahamnida
gamsahamnida :D Thank you 😄
When is it best to scribe; before priming or should I prime my parts first, then create panel lines?
Senik Nine Work on the panel line first. panel line - sanding - surfacer
@@RAVIPLA yes, okay. Thank you very much!
Senik Nine You're welcome. 😀
can anyone provide an amazon link to this tool?
Couldn't you just use one divider for both measurements
I cant find those dividers anywhere
Why not just lay down panel line tape on the first piece upside-down and then flip it over onto the new piece???
Where can I find that divider?
Search Google image for Bow Compass
Good job))
Thanks 😀
좋아요 좋아요 굳굳굳
좋게 봐주셔서 감사합니다 ^^
Can know what is that tape call?
HIQPARTS carving guide tape 3mm. 😀
@@RAVIPLA thank 😁😁
You're welcome. 😄
Have you tried the tape method? Lay down masking tape on the scribed part, use a pencil to get an impression of the lines on the tape, and use the impression to duplicate the panel lines. instagram.com/p/BkzubrzhKlR/
I know this method. But it's hard for me to set the edge of the end of the part. 😭 This method is also a good one. Thanks 😀
@@RAVIPLA Understandable. Have a good day!
sherwyn gonsalves Have a good day 😀😀
Gundam 0 diver ace?.. oh, wait. Guess not.
That's right for the part behind.
This is way too complicated. I just use a t square ang a small ruler
Perfect for when you only want 3 angles ever! You do you, bud.
이렇게...전국 매장에서 디바이더 매출은 올라가고...^^
ㅎㅎ 저도 디바이더를 이런 용도로 쓰게 될줄은 ㅎ