I had posted earlier on using Vaseline and it works. But here’s a reason to get their Debonder. I decided to buy some with my last order taking advantage of their holiday sale. I then proceeded to glue myself pretty severely to my wood project, not just once, but twice! Damn thin CA can run fast and get you quick. The Debonder not only worked, but besides a slightly slick residue on my skin which washes off easy, no CA glue was noticeable, it pretty much vaporizes it. Vaseline would have ruined my project, the Debonder dried up and had very little effect on my project. I have not tried a finish on it so I’m not sure if the residue would effect stain or paint, but visually I am happy I bought it.
Everyone in our warehouse who bottles our glues uses the debonder at the end of every day and their hands are baby soft! It's really good stuff and it is gentle on skin.
Tip: I just removed super glue on my desk using nail polish remover (acetone) and a cotton pad. It didn’t work when I put on the liquid and then tried to scratch it off with a card; I assume because it just evaporated instantly. I recommend rubbing hard with the same cotton pad, continuously applying the remover it until gradually dissolves.
Acetone definitely works, we formulated our super glue remover to be a thicker formula so that you can put it on the glue and let it sit without worrying about it evaporating like acetone does!
Vaseline works well on the skin as well and it’s not harsh like Acetone, especially if say fingers are bonded together. Let it sit and slowly work apart a bit at a time.
@Thestraykittys Glad it helped. Real nails, once dry, I would just sand it off. If you’re talking painted/acrylic nails, I’m not sure any of these would work without damaging them.
@@rorywquin I would LOVE to to see you prove it. Post a video of you supergluing your fingers together and unsticking them with water, then post the link here so we can be amazed. This isn’t a post on Elmer’s Glue pal.
My project was to glue magnets into a ceramic dish to turn it into a pin cushion. Turns out that the magnets are too strong and started cracking the ceramic. Fortunately, I realized this before the second magnet was set and I was able to remove it and use 100% acetone nail polish remover to dissolve the excess glue. Unfortunately, the first magnet isn’t where it needs to be, but can’t get it removed. I hoped that soaking the area would get around the edges and start working its way through to getting it removed, but the acetone eventually evaporated. Do you think this product would work on ceramic, particularly where the glue is set from top to bottom?
I've been thru this with quartz countertops and was advised by the company we purchased the quartz from to gently scrape any of the glue off u can using a putty knife or butter knife just be very careful not to accidentally chip ur countertop. Next their recommendation was to use acetone. Aka-nail polish remover! Just put some on a cotton ball or paper towel will work and rub in a circular motion and BAM it comes right off!🤗hope this helped!😊
The use CA instead of stitches so safe on skin. I’ve been using CA since before it became widely available (in the 70's I worked for 3M who supplied it in kits for repairing cables for underground mining equipment)) and am still here to tell the tale.
Studies show that although the cyanoacrylate glue can be useful in emergencies, it can also irritate the skin, kill cells and cause other side effects, particularly when used on deep wounds. We don't recommend it for wound care because there are a safer alternatives.
The nut on my electric guitar fell off and I knew I shouldn't use super glue to reattach it, but something like wood glue despite the materiel for the nut NOT being wood because it's a non expanding glue and will be relatively easy to remove it later as the nut will inevitably wear down and must be replaced. I hope one of these work because it was my first guitar and I can't bring myself to get rid of it.
Debonder can dissolve some guitar finishes. Also, it is acceptable to install a guitar nut with CA glue. Pros do it all the time. The issue is, don’t use a lot! Use a couple of pinhead sized dots. You don’t need to cover the whole underside of the nut. Just a couple of dots to hold it in place.
What is the best way to remove super glue from laminated floor and quartz countertop ? . Is very dry and I tried polish remover on the laminated floor and only make the stain white … 😢 please help . 🙏
I'm trying to glue some anime figures onto my car dashboard. I've used glue gun. It stuck, but the vibration from driving made the figures fell off. So I need something stronger. Would superglue or wood glue work? I also want to be able to remove it in the future, whenever I sell my car.
Fellas, do NOT crank one out until the superglue and whatever you use to get it off. Poor choice of words, but seriously keep your hands to yourself. ✌️
We sell several different viscosities of superglues and we include instructions and extra supplies in all of our packages so that you can have the confidence of a pro!
There are several home remedies that work - salt, hydrogen peroxide, petroleum jelly, etc, we just wanted to have a product made especially for the job!
I had posted earlier on using Vaseline and it works. But here’s a reason to get their Debonder. I decided to buy some with my last order taking advantage of their holiday sale. I then proceeded to glue myself pretty severely to my wood project, not just once, but twice! Damn thin CA can run fast and get you quick. The Debonder not only worked, but besides a slightly slick residue on my skin which washes off easy, no CA glue was noticeable, it pretty much vaporizes it. Vaseline would have ruined my project, the Debonder dried up and had very little effect on my project. I have not tried a finish on it so I’m not sure if the residue would effect stain or paint, but visually I am happy I bought it.
Everyone in our warehouse who bottles our glues uses the debonder at the end of every day and their hands are baby soft! It's really good stuff and it is gentle on skin.
Tip: I just removed super glue on my desk using nail polish remover (acetone) and a cotton pad. It didn’t work when I put on the liquid and then tried to scratch it off with a card; I assume because it just evaporated instantly. I recommend rubbing hard with the same cotton pad, continuously applying the remover it until gradually dissolves.
Acetone definitely works, we formulated our super glue remover to be a thicker formula so that you can put it on the glue and let it sit without worrying about it evaporating like acetone does!
Vaseline works well on the skin as well and it’s not harsh like Acetone, especially if say fingers are bonded together. Let it sit and slowly work apart a bit at a time.
@Thestraykittys Glad it helped. Real nails, once dry, I would just sand it off. If you’re talking painted/acrylic nails, I’m not sure any of these would work without damaging them.
Water will take it off. It is not waterproof.
@@rorywquin I would LOVE to to see you prove it. Post a video of you supergluing your fingers together and unsticking them with water, then post the link here so we can be amazed. This isn’t a post on Elmer’s Glue pal.
@@rorywquinnot a chance in hell or anywhere else
Salt works also. Sprinkle salt over the area, then pour a small amount of water over it. Viola!
My project was to glue magnets into a ceramic dish to turn it into a pin cushion. Turns out that the magnets are too strong and started cracking the ceramic. Fortunately, I realized this before the second magnet was set and I was able to remove it and use 100% acetone nail polish remover to dissolve the excess glue. Unfortunately, the first magnet isn’t where it needs to be, but can’t get it removed. I hoped that soaking the area would get around the edges and start working its way through to getting it removed, but the acetone eventually evaporated. Do you think this product would work on ceramic, particularly where the glue is set from top to bottom?
Hi, I got a little super glue on our quartz countertops in the kitchen - do you know if the debonder is safe to use on quartz?
I've been thru this with quartz countertops and was advised by the company we purchased the quartz from to gently scrape any of the glue off u can using a putty knife or butter knife just be very careful not to accidentally chip ur countertop. Next their recommendation was to use acetone. Aka-nail polish remover! Just put some on a cotton ball or paper towel will work and rub in a circular motion and BAM it comes right off!🤗hope this helped!😊
The use CA instead of stitches so safe on skin. I’ve been using CA since before it became widely available (in the 70's I worked for 3M who supplied it in kits for repairing cables for underground mining equipment)) and am still here to tell the tale.
Studies show that although the cyanoacrylate glue can be useful in emergencies, it can also irritate the skin, kill cells and cause other side effects, particularly when used on deep wounds. We don't recommend it for wound care because there are a safer alternatives.
Can you use hand sanitizer add acetone in a small amount and use that as debonder ??? Nice video fella.
Colin's voice is so recognizable! Great video. Thanks!
You know what, we agree.
Colin's a great friend and is a great addition to any video!!
Thank you, Scott Mc Williams.
The super glue didn't work but I sure got it all over my fingers 🥴
That happens to everyone! That's why we make the superglue remover!
Super glue works best on human skin. I think it (or something similar) my be used for sealing up wounds/cuts. (I'm serious!)
I nkow some relatives who use them for wounds and cuts it really works
will glue remove work on polystone statue without ruining the paint?
Should i use acetone or debonder to remove the superglue from an ebike handle?
Will debonder dissolve bakelite?
The nut on my electric guitar fell off and I knew I shouldn't use super glue to reattach it, but something like wood glue despite the materiel for the nut NOT being wood because it's a non expanding glue and will be relatively easy to remove it later as the nut will inevitably wear down and must be replaced. I hope one of these work because it was my first guitar and I can't bring myself to get rid of it.
Our debonder should work well for that, it will take some patience, though!
Debonder can dissolve some guitar finishes. Also, it is acceptable to install a guitar nut with CA glue. Pros do it all the time. The issue is, don’t use a lot! Use a couple of pinhead sized dots. You don’t need to cover the whole underside of the nut. Just a couple of dots to hold it in place.
Great tip!!! Thank you for sharing!
I have never seen a THICK debonder before. Is Starbond the only place that has it?
Acetone works the best
So useful I need to by stuff again can u make a video using thing ppls would ahve
I like the debonder. Thanks!
Thank you
What is the best way to remove super glue from laminated floor and quartz countertop ? . Is very dry and I tried polish remover on the laminated floor and only make the stain white … 😢 please help . 🙏
I'd try using an old plastic card or piece of wood as a chisel.
Will the debonder remove paint? I have ca glue residue on a painted surface and am looking to remove just the glue residue.
Debonder contains acetone, so it could possibly remove paint. We recommend doing a spot test before using it on a large area.
What if the super glue is on high gloss hdf console, what can i use to remove it
I'd be curious what you recommend for glue on the top surface of a ping pong table.
For 3d printed parts? I used super glue resistant to shock, 105°c and i glued both parts in the wrong way, i need help
What’s the best way to remove superglue from a carpet surface e.g car interior carpet?
You could try our debonder, let it sit for 5 or 10 minutes and scrape it off.
Please when the glue is on the hair. What can😅 I use to remove it
You can use any of the suggestions in the video!!!
Scissors
Tysm!
does the glue remover dissolve plastic?
HG sticker remover melts Pantum laserprinter plastic.
Thinner works or tinner not sure of the spelling..
How canyou remove glue from water cooler tap
I'm trying to glue some anime figures onto my car dashboard. I've used glue gun. It stuck, but the vibration from driving made the figures fell off. So I need something stronger. Would superglue or wood glue work? I also want to be able to remove it in the future, whenever I sell my car.
Used to be able to buy nitromethane. It would make quick work of superglue. Can't seem to find it easily anymore.
Good thing our debonder is available!!!
How To Remove The Mighty Bond In My Dentures Thanks.
What's the shelf life of Starbond? I bought a kit of thin and thick, as well as a bottle of colored CA. It all solidified in about two months.
It needs to be kept in the fridge. I believe their site says 2 years if kept in the fridge. I have had mine in there probably 6 months and no issues.
What about CA stains on fabric?
It would probably depend on that kind of fabric
Ok. My sibling decided to use superglue to repair a part of their serger. Will this get the superglue off of that?
Yes! If the serger has plastic parts, though, you might want to spot test it on an inconspicuous spot because it could remove paint or a finish.
I put super glue on my press on nails and I can’t get it off this is bad
Debonder for Gorilla glue?
Our debonder should work on any kind of cyanoacrylate glue!
How do I remove it off my diamond earrings I need help please
If you didn't find your answer yet nail polish remover
How to remove it from hair??
We don't recommend putting it in hair, but if it does accidentally get in your hair, you could use any of the suggestions from this video
thanks @@StarbondAdhesives
Where the hell I get debonder?
We sell debonder! starbond.com/products/ca-glue-debonder-remover?FB&FB&FB
I would have loved to see an actual demonstration.
Thanks for your feedback, we appreciate it!
Fellas, do NOT crank one out until the superglue and whatever you use to get it off. Poor choice of words, but seriously keep your hands to yourself. ✌️
Thank you I got off my they came off of hot glue
If you get Super Glue on your fingers, to remove it use Nail Polish with Acetone and it will come right off!
Thanks for sharing that tip! It's always good to have handy solutions for sticky situations.
what works with leather…
Are you trying to remove super glue from leather?
I am trying to remove super glue from i believe faux leather
Our super glue remover is gentle enough for skin, so it could work, but we would recommend testing it on a small portion of the faux leather first.
Hi Colon! Nice video.
Sorry!!! Hi Colin! Nice video!
By the way, it’s just a glue on nail
Be careful using acetone as it may dissolve some plastics and other materials. Always test it first on an inconspicuous area.
It's always a good idea to test on a small area first, especially when working with delicate materials. Thanks for highlighting that! 🙏🏻
Hate superglue. Way too liquid and hard to control
We sell several different viscosities of superglues and we include instructions and extra supplies in all of our packages so that you can have the confidence of a pro!
just use lotion or any food oil.
😇
click bait
I spilled it all over my Xbox one S I need to get it off
WD 40 apparently works
There are several home remedies that work - salt, hydrogen peroxide, petroleum jelly, etc, we just wanted to have a product made especially for the job!
All people can use super glue,if it works,let them.Btw,Accidents Can & will happen.Smh
No one wants or needs to know what we can "TRY". If you have any knowledge on the subject to share then tell us WHAT dissolves the cured glue.
The video explains several different methods to remove super glue! if you need more suggestions, please let me know! Thanks and have a great day!!!
Appreciate your video.
What’s best way to remove from a fragile painted substrate - automotive painted abs interior panel?
@@StarbondAdhesives1:59
If all you people are having so much trouble with super glue, then you shouldn't be using it. Christ Almighty!
Shut up kiddo