had this issue in my golf gti mk6, i bought a new ecu matched part numbers from my factory one and a new one. got it reprogrammed and it fixed my issue.
Good video bro, I’m in the uk 🇬🇧 but was born in zim’s….you definitely need a machine polish. Looking for to seeing the progress on the car. New sub here 🎉
1 - Disconnect the battery for an hour to perform a hard reset on the ECU. If a fault has persisted long enough, it will log a long term fault on the ECU. I had this issue on my Leon Cupra many years back 2 - Log Blocks 230 (HPFP) & 231 (LPFP) to compare requested vs actual according to RPM\Load, 3rd gear WOT pull 3 - Could look at doing the 5mm drill mod on your HPFP inlet to alleviate pressure from your LPFP 4 - Fuel Rail Sensor as mentioned 5 - Upgraded RS4 Fuel Pressure Regulator Valve
The 6R has the EA113 engine, better than the EA888 in the standard 6. But they do have their issues and those fuel cuts together with the codes are 2 things: 1 the intake cam needs to be replaced, the HP fuel pump lobes are worn and the previous ownes just replaced the follower. 2, injectors are done. You will probably have a slight missfire as well. Get it scanned to see which injector is causing it, but its better to change them all. Here is the problem, Bosch dont make them anymore and the Goldwagen ones are fine for a std map but if tuned then they dont cope. S3 injectors will work but the ECU will need adaption. Good luck, it gets expensive but lovely cars if they run right
Yoh cee jay... great video. Try to release a video every week, around the same time. For the algorithm. That's what Matt Armstrong did. The red looks sick 🔥🔥
Proper content 💯 I have a MK5 GTI I also had a fueling problem that came and went away every now and again after replacing my HPFP I never had the issue again. Looking forward to the project.
@hectorbapela My diesel filter was connected direct which caused impurities to affect the injectors...l.was changed common rail,HPP,low pressure to no avail. Took the car to a mechanic in New lands and he changed and codes the injectors and my problem was sorted.
😂 I guess it is just that simple. It would probably depend on how bad your paint is but works great for sun damage to clear coat. A step up would be to machine polish and I guess a step up from there would be to wet sand and then spray clear coat, which is probably what I’ll end up doing 🙏🏼🙌🏼
Before? Yes that could definitely be possible, someone else mentioned that it might have been hail damaged repaired 🤷🏻♂️ but if you’re referring to after my polish then you’re absolutely spot on 😂
Hey @Cee-JayDunne you're really great at this. I wanted to know how long it usually takes you to record and edit a video to this level? And what sort of equipment do you use for recording as a one man show?
Hey, thanks man! Appreciate it. So I just use my phone and a gimbal. I don’t think you really need a gimbal, could get away with just a tripod. And I guess how long it takes will depend on what it is that you’re doing, I shot this video over 2 days and it took me about 6 hours to edit, split over 2 days 🙏🏼 I hope that answers your question 🙌🏼
6:52 😂literally thought he was about to get robbed 😂🤣
I love channels like this. Im Glad an SA guy is doing it. Lekker bruh!
Thanks bro 🙏🏼
oh my dude the quality of this video is perfect.
Thanks man 🙏🏼
had this issue in my golf gti mk6, i bought a new ecu matched part numbers from my factory one and a new one. got it reprogrammed and it fixed my issue.
Glad you got yours sorted bro 🙌🏼
Good video bro, I’m in the uk 🇬🇧 but was born in zim’s….you definitely need a machine polish. Looking for to seeing the progress on the car. New sub here 🎉
Thanks man, I really appreciate it 🙏🏼 and yes I definitely need to get a machine polish 😂 hopefully soon
Been looking into buying this car just to ease my child hood dreams LOL...Thanks man will be following this one
😂 that’s one of the biggest reasons why I bought it, to be honest
Looking forward to solving the issues and what is next to come.
Thanks man! Stay tuned 🙏🏼
great video
Glad you enjoyed it 🙏🏼
Can't wait for the next video we need more South africa car youtubers .nice video bra can't wait to see what you have planned
Thanks bro, appreciate it 🙏🏼 next video dropping soon
Keep updating us about the build ❤you will go far trust me 🎉
Thank you, I appreciate that! 🙏🏼 Will do 🔥
Subscribed and excited to see the journey, I love a 6R, lekker content bru🙌
Thanks bro 🙏🏼 and welcome onboard!
I'm also rebuilding one.. these are very nice cars
I couldn’t agree more, the 6R is an absolute beast 🔥 would love to see the progress of your build
@@Cee-JayDunne Sure will send you the progress on my project
Following for more. Good upload. Keen to see the outcome. 👌👍
Thanks man! Appreciate it 🙏🏼 more to come
Great content bro you deserve way more subscribers
Thanks! I really appreciate that 🙏🏼
bro its been days now! drop part 2 and once part 3 as well! Please!!
1 - Disconnect the battery for an hour to perform a hard reset on the ECU. If a fault has persisted long enough, it will log a long term fault on the ECU. I had this issue on my Leon Cupra many years back
2 - Log Blocks 230 (HPFP) & 231 (LPFP) to compare requested vs actual according to RPM\Load, 3rd gear WOT pull
3 - Could look at doing the 5mm drill mod on your HPFP inlet to alleviate pressure from your LPFP
4 - Fuel Rail Sensor as mentioned
5 - Upgraded RS4 Fuel Pressure Regulator Valve
Perfect, thank you so much. I’ll definitely give that a try, really appreciate it 🙏🏼
Hola my bru... Just subbed as well. Lekker !
Thanks for the sub bro 🙏🏼
The 6R has the EA113 engine, better than the EA888 in the standard 6. But they do have their issues and those fuel cuts together with the codes are 2 things: 1 the intake cam needs to be replaced, the HP fuel pump lobes are worn and the previous ownes just replaced the follower. 2, injectors are done. You will probably have a slight missfire as well. Get it scanned to see which injector is causing it, but its better to change them all. Here is the problem, Bosch dont make them anymore and the Goldwagen ones are fine for a std map but if tuned then they dont cope. S3 injectors will work but the ECU will need adaption.
Good luck, it gets expensive but lovely cars if they run right
Thanks man! Appreciate it. Definitely the goal to get it running well and then maybe even stage 2 🤷🏻♂️🙏🏼
Yep you're off to a gr8 start, I'm subscribed and looking forward to future content...loving it so far. 👌👏
Thank you 🙏🏼 Really appreciate it. Welcome onboard 🙌🏼
Yoh cee jay... great video. Try to release a video every week, around the same time. For the algorithm. That's what Matt Armstrong did. The red looks sick 🔥🔥
Thanks man, that’s some solid advice. I will try my best going forward 🙏🏼🙌🏼
Proper content 💯 I have a MK5 GTI I also had a fueling problem that came and went away every now and again after replacing my HPFP I never had the issue again. Looking forward to the project.
Thanks man 🙏🏼 I’ve heard that the MK5 has issues with the HPFP, specifically the cam follower. I’m glad yours is sorted
Gonna be a lekker journey 🔥.
Fingers crossed, it all works out 🤞🏼 hope you stick around to watch it unfold 🙏🏼
Subscribed! Eager to watch the journey. Please also keep track of how much it all costs.
Thanks man! 🙏🏼 I definitely will do
Love your content bro.. Hope to see more videos soon 🔥💯✨
Thank you bro 🙏🏼 much appreciated. Part 2 is on the way!
solid video, love from CPT❤
Appreciate it! 🙏🏼 thanks man
Just gained a subscriber! Lekker content bud👌
Thanks man! Really appreciate it 🙏🏼
I have a red mk5 gti needs some work but it is pretty clean for it age can't wait to see the next video
The mk5 GTI is a beast and I’ve heard those engines are bulletproof. Next video coming soon, thanks 🙏🏼
Lekker man looks like it’s about to be dope journey with you
Thanks man 🙏🏼 stay tuned
LOVE it bro💯
Thanks bro 💯
The only vw i need...golf 6r
Same 😂👍🏼
awesome vid bro. can't wait for the next upload. Not sure if the R has an intake sensor. Sometimes they need a clean or replacement.
Thanks man 🙏🏼 I’ll look into it. Next upload coming soon 🙌🏼🔥
Nice. New Sub here
Thanks for the sub!
Awesome video bro
Thanks bro 🙏🏼
Video quality is good nd i like these tipe of content never know maybe u SA Mat Amstrong
Thanks man, really appreciate it. I would love to build a RR Mansory 😂🤞🏼
@@Cee-JayDunne hard work beats talent👌
P0087 is for the high pressure fuel pump on the engine.Had the same problem on N18 engine. Problem solved after fitting a new hpfp
Thanks man! 🙏🏼 That might be the next step
@@Cee-JayDunne you are welcome brother.
Goodluck with your ride💯
Had the same error message on my audi b8 2020 ,,and the issue was the injectors over fueling
@@sydneymukwevho3374 were they recalibrated?
@hectorbapela My diesel filter was connected direct which caused impurities to affect the injectors...l.was changed common rail,HPP,low pressure to no avail.
Took the car to a mechanic in New lands and he changed and codes the injectors and my problem was sorted.
You need to use vcds and log current fuel pressure on lpfp and on hpfp it will tell u if ur issue is fuelling or something else
Thank you, will do. Appreciate the input 🙏🏼
Nice video bro, one suggestion though... There's too much music and too loud also, can't even hear you speak sometimes
Thanks man! Appreciate the input, I will definitely work on that 🙏🏼🙌🏼
Bro, you're saving us money on a paint job, bro. Is it that simple?
😂 I guess it is just that simple. It would probably depend on how bad your paint is but works great for sun damage to clear coat. A step up would be to machine polish and I guess a step up from there would be to wet sand and then spray clear coat, which is probably what I’ll end up doing 🙏🏼🙌🏼
@Cee-JayDunne Thanks bro that's good information you're giving us 👌.
Buy a roll of Alcantara for the roof
That’s actually not a bad idea, I’ll definitely consider that. Thank you 🙏🏼
Got an Audi a3 fsi and started doing the same around 3000rpm, it's quite concerning 😟
I might have found a fix for my car, I’ll explain in the next vid. I hope you find a solution for yours man 🤞🏼🙏🏼
Bro is it just me or does your car have Mercedes-Benz amg wheels fitted?
Yeah it does bro
@@Cee-JayDunne nice
target is to get you a mansory bodykit
Does that exist for a Golf 6R?
U from SA and using the word "horse power"?! 👀 nee man
😂 what must I say then?
You don't know a peach from a lemon lad
I think you might be right 😂
Why does the paint look like a polish gone wrong 😅
Before? Yes that could definitely be possible, someone else mentioned that it might have been hail damaged repaired 🤷🏻♂️ but if you’re referring to after my polish then you’re absolutely spot on 😂
Poor Hail damage repair. They just filled and painted the dents that is why they are Halos everywhere
I think you’re absolutely right, kinda sucks but hopefully I’ll be able to fix it probably in the future 🙏🏼🙌🏼
Please don’t play music when driving the car 🙏🏾
I can’t say that won’t happen but I will take your comment into consideration 🙏🏼 thanks man
Anyone that works on VW cars is my vriend...Ek kan nie wag om te sien wat in die winkel is nie, wonderlike inhoud...
Baie Dankie Vriend 😂👍🏼
@@Cee-JayDunne lekker
Hey @Cee-JayDunne you're really great at this. I wanted to know how long it usually takes you to record and edit a video to this level? And what sort of equipment do you use for recording as a one man show?
Hey, thanks man! Appreciate it. So I just use my phone and a gimbal. I don’t think you really need a gimbal, could get away with just a tripod. And I guess how long it takes will depend on what it is that you’re doing, I shot this video over 2 days and it took me about 6 hours to edit, split over 2 days 🙏🏼 I hope that answers your question 🙌🏼