How to PLUG a CONCRETE PUMP!!!… in one easy step.

Поделиться
HTML-код
  • Опубликовано: 15 дек 2024

Комментарии • 55

  • @chriscalhoun.concretepumping
    @chriscalhoun.concretepumping 2 месяца назад +3

    I use liquid primer as you know with absolutely zero issues. The stuff I use is amazing for me. It has to be the sand. You saw my video Scott I sent it over 300ft of 2” hose. Just happens to work for me and not you lol. We have very fine sand. White beachy sand. You all have that dark sand more coarse. I was pulling for ya though. It sure is a clean way to prime out when it works

    • @canadianconcretepumper1979
      @canadianconcretepumper1979  2 месяца назад +1

      @@chriscalhoun.concretepumping This was actually he primer which you sent me 😂😂😂
      Comparing the video which you sent me to what I experienced here (and every other time using slime-prime), I’m convinced that like you say, it’s has to be the more coarse sand which is used in our mixes here.

    • @chriscalhoun.concretepumping
      @chriscalhoun.concretepumping 2 месяца назад

      @@canadianconcretepumper1979 I had a feeling this was my stuff lol. Man it works awesome for me. I’d say the sand is definitely the problem. I pump with Super P all the time so it’s not that I would t think. Only other thing could be our stone is 1/2” or 12mm and a 4,000psi mix is our norm.

    • @canadianconcretepumper1979
      @canadianconcretepumper1979  2 месяца назад +1

      @@chriscalhoun.concretepumping so this mix here was also 1/2” stone (crushed), 4500 psi mix. I’m betting the difference is the sand. Ours is anything but fine. That’s what I love about the comments section. It really shows how methods and techniques can differ gratify from one region to another. What works great for me here in our area may not work worth two you know what’s in someone else area.

    • @chriscalhoun.concretepumping
      @chriscalhoun.concretepumping 2 месяца назад

      @@canadianconcretepumper1979 that’s the truth. I love it when people try and tell you to use a certain product because it works great for them everytime and they just assume we’re doing something wrong but don’t take the time to realize material in each mix design is different in each part of the world. I know without a doubt, I’ll use super primer until I retire or move to Canada I guess haha. 🤣 I have no reason to change. It is very convenient priming using that stuff. I’m sorry it didn’t work for you but I’m loving the fact it was put to the test in that area! It’s fun to see how we all have to tackle things differently! Thank you for doing this video even though it made your day a little tougher 😁

    • @canadianconcretepumper1979
      @canadianconcretepumper1979  2 месяца назад

      @@chriscalhoun.concretepumping LOVE this comment Chris. It's so true indeed.

  • @reedpumps
    @reedpumps 10 дней назад +1

    this was the best entertainment I've had all day - thanks Scott! - see you in January hopefully

    • @canadianconcretepumper1979
      @canadianconcretepumper1979  10 дней назад

      @@reedpumps You knew we meant business when the 20 lbs edge came out to play!!!!!! 🤣🤣🤣

  • @JeffLMisc
    @JeffLMisc 2 месяца назад +1

    The rock looks good. I know where i work they don’t use washed sand, and some people complain about it saying it’s sticky. But a lot of the pump operators also just prime with water only, with some use of slick Willy 2. If it’s an admixture issue, you might want to try reaching out to the local sika or grace rep about the admixtures. We also use sika 2100 for a plasticizer.

    • @canadianconcretepumper1979
      @canadianconcretepumper1979  2 месяца назад +1

      @@JeffLMisc This is great advice. I’m thinking it’s either the chemicals added to our concrete, or the type of sand used here locally.

    • @JeffLMisc
      @JeffLMisc 2 месяца назад

      @@canadianconcretepumper1979 some priming agents are just incompatible with some chemicals. Have you ever primed with just water? that's the go to here

  • @pomonabill220
    @pomonabill220 22 дня назад +1

    Nice forearms!!!

    • @canadianconcretepumper1979
      @canadianconcretepumper1979  22 дня назад

      @@pomonabill220 Comes from years of squeezing those on/off buttons of the handheld remote 😂😂😂

  • @Readymix-Andy
    @Readymix-Andy 2 месяца назад +2

    Props to you for putting yourself through that pain for science, when you already knew it would plug and you would have to shake it all out. Not sure I would want to put myself in that position just to silence the nay sayers :)

    • @canadianconcretepumper1979
      @canadianconcretepumper1979  2 месяца назад

      As bad as my previous experiences have been with slime-prime, I still wasn’t expecting to exert this amount of effort for priming just a measly 50 feet of hose! 😂😂😂

  • @curtisheb8595
    @curtisheb8595 2 месяца назад +1

    Is there a reason why you use a smaller sludge hammer than a bigger one for plugs? Or just a smaller one easier as it's carry around. Love the channel!!

    • @canadianconcretepumper1979
      @canadianconcretepumper1979  2 месяца назад

      @@curtisheb8595 That’s actually my “bigger hammer” 😂😂😂
      I keep a smaller one as well. I prefer smaller because I’m more a fan of tapping lightly one the hoses reducers when chasing plugs. Mostly just a personal preference really.
      Glad to you aboard with us on the channel here. Always appreciate the good questions and comments. Pump on brother! 👊👊👊

  • @danielcotton-pm6tw
    @danielcotton-pm6tw 2 месяца назад +1

    have you tried it in the hopper? quarter full hopper of water mixed with slick pack always works for us

    • @canadianconcretepumper1979
      @canadianconcretepumper1979  2 месяца назад +1

      @@danielcotton-pm6tw So that one I have not tried yet. I will give it a go, but except the same results. The minute our concrete comes into contact with gel-type primer the sand/fines are instantly pulled from it and cling to the inner walls of the hose, leaving only heavier sand and stone to move forward through the line (or not move, more accurately).
      It literally plugs after only 5-10 feet inside of the hose. Every time!!!
      It’s got to be our sand is what I’m thinking.

    • @danielcotton-pm6tw
      @danielcotton-pm6tw 2 месяца назад

      @@canadianconcretepumper1979 very well could be!

  • @williamhunter-d1i
    @williamhunter-d1i 2 месяца назад +1

    if failing, fail and fail again, just to prove a point. my life's motto. just trying to prove a point people

  • @rawgerod
    @rawgerod 2 месяца назад +2

    I get thoughts in the middle of the night after nightmare pours that maybe we should be washing our hoses with the slick prime..so after you wash out all the concrete run the pump with slick prime on the hose and put it away .. so when you use it again the following day the slick pak will activate .. and you use water to prime out.. I've tried everything too..

    • @alecmadrid2120
      @alecmadrid2120 2 месяца назад +1

      Just start buying Portland for line jobs if it’s that hard to prime mix it kinda like pancake batter and she goes

  • @victariondrownedmemory9886
    @victariondrownedmemory9886 2 месяца назад +1

    Yeah ive had similar issues with it on my line pump, i stick with a thick crepe batter constitency of fly ash powder, maybe a bit thicker for downhills and works 8/10 times. but everyone likes something different, my old boss used to swear by using loam or light dirt for primer and that would work too but not very good for concrete so id have too catch it

  • @johnschmeltz163
    @johnschmeltz163 2 месяца назад +1

    Is your sand man made i always found it harder to pump it

    • @canadianconcretepumper1979
      @canadianconcretepumper1979  2 месяца назад

      So it is natural sand, but for what I can tell, it is quite coarse in comparison to most other markets. Also, our lines mixes tend to be ultra heavy on sand, which I’m sure doesn’t help.

  • @johnschmeltz163
    @johnschmeltz163 2 месяца назад +1

    I always just put a soft sponge in a hose ahead of the one im putting my slurry in never used plastic bags

    • @canadianconcretepumper1979
      @canadianconcretepumper1979  2 месяца назад

      So I’ve tried that one a few times and had never seen positive results (plugs within 1-2 hoses). I believe that it has something to due with the type/amount of sand in our mixes…. which could also possibly explain why the slime-prime doesn’t seem to work for us. 🤔🤔🤔

  • @bkperumal123
    @bkperumal123 2 месяца назад +1

    what's the diameter and length of hoses?

  • @DeruginizCLS
    @DeruginizCLS 2 месяца назад +1

    I feel like that stuff on works for metal pipe. Def not hoses. I’ve had same result.

  • @MuDemon2023
    @MuDemon2023 2 месяца назад +1

    We have have the same results with 3 inch line with 3/4 mix no chemical added, never use it any more only mortar mix

    • @canadianconcretepumper1979
      @canadianconcretepumper1979  2 месяца назад +1

      @@MuDemon2023 Jeff and I are going to test this stuff out one some 3” when I’m down in Texas a couple of weeks from now.

  • @markrios78
    @markrios78 2 месяца назад

    I just used Portland cement mixed with water.

  • @melvinschmecklebak3766
    @melvinschmecklebak3766 2 месяца назад +1

    Has to be bad reaction with the Plastisizer. When I delivered to pumps we would only slop down first hopper to get it thru the lines. Never a problem

    • @canadianconcretepumper1979
      @canadianconcretepumper1979  2 месяца назад

      @@melvinschmecklebak3766 So that’s what I begging to think as well. Either that, or it has something to do with our sand. 🤔🤔🤔

  • @fronabargerconveyingpumping
    @fronabargerconveyingpumping 2 месяца назад

    Use half a bag instead of a whole bag, makes a difference.

  • @101hundred
    @101hundred 2 месяца назад +1

    Use slurry, that slick willy is rubbish. Also soapy water ahead of the slurry helps it not mix better,

    • @canadianconcretepumper1979
      @canadianconcretepumper1979  2 месяца назад

      Yup, my bentonite blows this stuff out of the water! I'm going to try adding a little bit of dish soap to my bentonite next time as well.

  • @chebarden8278
    @chebarden8278 2 месяца назад

    We use 2 bags of primer to 30 litres of water never had a plug

  • @TheConcreteman006
    @TheConcreteman006 2 месяца назад

    Doesnt work in l.a. either.

  • @SarahFarley-h9q
    @SarahFarley-h9q 19 часов назад

    The video is very interesting! Something I don't understand: I have TRC20 USDT in my OKX wallet and I have the recovery phrase: (pride pole obtain together second when future mask review nature potato bulb). How should I convert them into Bitcoin?

  • @willimcdonalds
    @willimcdonalds 2 месяца назад +2

    Try to add more water to the slime so it doesn’t pull the moisture out of the concrete but not to much to not segregate. 🧪 science 🧬

    • @canadianconcretepumper1979
      @canadianconcretepumper1979  2 месяца назад +1

      @@willimcdonalds I swear I tried it all with this stuff. It will give it another go taking into account what you suggest. I’m down in Texas a couple of weeks from now hanging out with Muddy Feet. We are planning to get a few yards of concrete and do a test of serval different primers. Could be the perfect opportunity to play around some more with the slime-prime.

  • @hankrum1toni
    @hankrum1toni 2 месяца назад +1

    Talking about nightmare days.Halfway thru a pour concrete stopped flowing.Few strokes back and again we go.Then when i stop to park the next mixer concrete cant start like its plugged.3 trucks later we done and i cant pull the sponge.When i looked in my hoper the cuting ring on the S valve was broken in half.How does that even happen? Segregeted concrete or just wearing with time ?

    • @canadianconcretepumper1979
      @canadianconcretepumper1979  2 месяца назад +1

      @@hankrum1toni I have seen with some of the carbide wear parts cases where debris from the mixer (usually metal) will take out the hardened wear parts as they are for more brittle than the standard steel pieces.

    • @hankrum1toni
      @hankrum1toni 2 месяца назад

      @@canadianconcretepumper1979 good point 🍻