I just ordered this board and this will be the first time I build an entire board by myself. I'm nervous about the stabs. Does the PCB support screw in, or is it only clip in?
Screw-in and clip-in are both PCB mounted stabilisers; both use the same mounting holes on the PCB. You are probably confusing clip-in with plate-mount stabs. Plate mount stabs do clip into the plate, but are almost always called plate mount and not clip in as that term is reserved for clip-in PCB mount stabs. Clip-in PBC mount stabs just push into smaller hole on the stab cut-out (as seen in this video), screw-in stabs use a screw thorugh the smaller mouting hole to secure the stabiliser to the PCB. *This keyboard kit comes with NEO clip-ins* Screw-ins can be more secure, but whether they are depends on the quality of the clip-in stabs you are comparing them to as they can vary a lot. From what I've heard (and seen in this video) NEO clip-ins aren't the tightest, and so I would personally recommend a set of different clip-ins or screw-ins. TX, Gateron, SW-knight are some well-known stabilisers brands. Screw-ins are easier to install in my opinions, clip-ins can be a bit fiddly.
Great, the first time building keebs and you've already know about crew-in, clip-in, plate mount... things. Keep the good works, you'll become addicted to this hobby soon I warn ya 😂
@@nddung92 :) I feel like I'm already addicted. I've bought a couple pre builts and messed with a handful of different switches and keycaps already. HELP! lol
![Twenty One Pilots - The Line (from Arcane Season 2) [Official Audio]](http://i.ytimg.com/vi/XCz7WUotXs8/mqdefault.jpg)
k quan tâm đến soundtest mà video sốp làm chill ác
I just ordered this board and this will be the first time I build an entire board by myself. I'm nervous about the stabs. Does the PCB support screw in, or is it only clip in?
Of cource, both. You can use any pcb stabs, screw in or clip in is just the way that stabs are tightened to pcb. Screw in feels more sturdy though
Screw-in and clip-in are both PCB mounted stabilisers; both use the same mounting holes on the PCB. You are probably confusing clip-in with plate-mount stabs. Plate mount stabs do clip into the plate, but are almost always called plate mount and not clip in as that term is reserved for clip-in PCB mount stabs.
Clip-in PBC mount stabs just push into smaller hole on the stab cut-out (as seen in this video), screw-in stabs use a screw thorugh the smaller mouting hole to secure the stabiliser to the PCB. *This keyboard kit comes with NEO clip-ins*
Screw-ins can be more secure, but whether they are depends on the quality of the clip-in stabs you are comparing them to as they can vary a lot. From what I've heard (and seen in this video) NEO clip-ins aren't the tightest, and so I would personally recommend a set of different clip-ins or screw-ins. TX, Gateron, SW-knight are some well-known stabilisers brands.
Screw-ins are easier to install in my opinions, clip-ins can be a bit fiddly.
@@oatmilk9918 thank you for the explanation. I appreciate it very much. Lots of terminology to learn. :)
Great, the first time building keebs and you've already know about crew-in, clip-in, plate mount... things. Keep the good works, you'll become addicted to this hobby soon I warn ya 😂
@@nddung92 :) I feel like I'm already addicted. I've bought a couple pre builts and messed with a handful of different switches and keycaps already. HELP! lol
Nghe tiếng hay, thiết kế gasket này dự là rất ổn định. Tiếc là signature sound của em này không phải kiểu clacky kim loại theo gu của mình :(
Bên mình có mấy em siêu clack như Neon, catmint.... bạn có thể qua shop để test thử xem sao
con này có bản 65% không shop
dạ cùng hãng Neo Studio thì có phím Neo65 nhưng ngôn ngữ thiết kế của phím đấy khác dòng Cu mới này ạ
làm sao để tháo được sw ở nút enter vậy thầy, nó kẹt với stab rồi mà nhỉ
Dùng nhíp nha bạn, ép 2 ngàm của nó lôi lên, hơi khó tí
con này so với Pt 75 con nào hơn sốp
Dạ phím đấy shop chưa được trải nghiệm nên cũng không đánh giá được ạ