For those confused, (it took me quite awhile all while I was being eaten alive by bugs) the instructions included say to splice the halos (red and white wires that have no connectors) into the LED wire. The led wire if you are careful you can pull a little bit out and have about 2 inches of wire to stager come quick connects to. attach the red wires from the HALOS to the white of the LEDS, and the the black to black. Pretty sure the car in the video used individual switches to showcase the lights individually.
Every light comes with knobs behind the lights. Either a hex head or screw driver should be able to turn them. Turning the lights on and then turning the hex head (or screw) will bring the lights up or down.
Do I connect the CCFL/LED wire to the wire that lights up the lower H1 bulb? because in the Celica it is this H1 bulb that functions both as the running lights and high beam at the same time.
Did you ever find an answer for this? I'm kinda in a pickle trying to figure out where to wire in the Halo lights. Thinking about doing it into the LED strip.
Forza Ninetails So did you ever find out if you're supposed to splice the halos into the led? I have yet to try it but it makes sense since the DRL I'm assuming is the LEDs. I'm in the middle of installation and night fell so I decided to pack up and finish it in the morning so I'm going to test out the wires that are plug and play and see what corresponds to what.
For those confused, (it took me quite awhile all while I was being eaten alive by bugs) the instructions included say to splice the halos (red and white wires that have no connectors) into the LED wire. The led wire if you are careful you can pull a little bit out and have about 2 inches of wire to stager come quick connects to. attach the red wires from the HALOS to the white of the LEDS, and the the black to black. Pretty sure the car in the video used individual switches to showcase the lights individually.
Thomas Seals here is the general guide how to wire CCFL/LED/ HALO
ruclips.net/video/pKzWl6-Fac0/видео.html
Is it possible to switch high/low beams to LED?
How do you adjust these lights? Is there a “how-to” video available for that?
Every light comes with knobs behind the lights. Either a hex head or screw driver should be able to turn them. Turning the lights on and then turning the hex head (or screw) will bring the lights up or down.
Where to buy these lights any link
Are those LED or CCFL?
I bought these 4yrs ago and now my driverside headlight side leds, the 2 are busted. are those replaceable?
+philboytano unfortunately they are not replaceable.
Can i add a HID conversion kit to these?
You can contact our tech support at 626.934.8884. they will be able to answer the questions you have.
What is the name of this song?
darude sandstorm
Do I connect the CCFL/LED wire to the wire that lights up the lower H1 bulb? because in the Celica it is this H1 bulb that functions both as the running lights and high beam at the same time.
Did you ever find an answer for this? I'm kinda in a pickle trying to figure out where to wire in the Halo lights. Thinking about doing it into the LED strip.
David Graham
We have a video on how to wire CCFL/HALO/LED. "SPYDER AUTO FAW HOW TO WIRE"
Forza Ninetails So did you ever find out if you're supposed to splice the halos into the led? I have yet to try it but it makes sense since the DRL I'm assuming is the LEDs. I'm in the middle of installation and night fell so I decided to pack up and finish it in the morning so I'm going to test out the wires that are plug and play and see what corresponds to what.
lilazntown you can give us a call in the morning at 6269348884, our tech support can give you suggestion on this matter.
what are the k's
+Quinn Olvera are you referring the LEDs? if so they pure white LEDs, roughly at 5600k
Wtf em I supposed to do with the 2 red and 2 black wires??
Connect them to a light source.
Nani?