SONY tv XBR 65X930D no power troubleshooting and fix

Поделиться
HTML-код
  • Опубликовано: 24 авг 2024
  • plz subscribe

Комментарии • 28

  • @n.potier4150
    @n.potier4150 3 года назад +2

    Thank you, I repaired my Tv thanks your tutorial ! :D I bought a rework station and a spare TPS54334DDA 8-pins chip. I asked Texas Instrument (TI), there are only two kinds of TPS54334 chips : 8-pins and 10-pins. What you need here is the 8-pin. Replace your chip and Tv is good to go.

    • @n.potier4150
      @n.potier4150 3 года назад +2

      Update : same ship burnt again after 3 days. Another faulty component seems responsible.

    • @SOSfixElectronics
      @SOSfixElectronics  2 года назад +1

      check for short or partial short in the input and out put of the ship

  • @brutalpancho
    @brutalpancho 3 года назад +2

    very nice! Almost like playing a game - trying to follow where the problem exists. Thank you.

  • @derbuchleser
    @derbuchleser 3 года назад +2

    Wow. Thanks for a great explanation! I can't find that IC either. Do you know the model number for the whole board? TV out of warranty... :(

    • @SOSfixElectronics
      @SOSfixElectronics  3 года назад

      sorry i dont remember, take the back cover and check there for the board number

  • @makavelli50
    @makavelli50 2 года назад +1

    I moved this tv from 1 room to another and when starting it turns on like going to reboot and then turns off and fromt lef light flashes 3 times continuously
    Any advice? Thanks

    • @SOSfixElectronics
      @SOSfixElectronics  2 года назад +2

      check the cables inside the tv maybe one of them disconnected or bad connection

  • @am.aj.2109
    @am.aj.2109 3 года назад +1

    Hello i have no 24V on the input capacitor on 8:20. otherwise i have the same problems. Can you help me please ?!?

    • @SOSfixElectronics
      @SOSfixElectronics  3 года назад +1

      Check that capacitor the resistance to the ground if it is low?

    • @shqipstars7796
      @shqipstars7796 3 года назад

      @@SOSfixElectronics Hello, thanks for your answer, I only have + 24V on the chip fuse F404 3.15A. I have 0V on all resistors (gray). What do you think I have to replace the Chip Fuse F404? Is it broken? I think I'll change the F404 and the IC TPS54334? What do you mean ?

    • @SOSfixElectronics
      @SOSfixElectronics  3 года назад

      @@shqipstars7796 is the fuse tested open? If yes before you cha ge the fuse check for shorted component cuz the fuse usually blown if there is a short.

  • @juancabrera8501
    @juancabrera8501 2 года назад

    where to find that ic must help everyone

  • @M.E63
    @M.E63 Год назад

    You can get that IC no problem, I sell them myself

    • @carsjonathan1
      @carsjonathan1 6 месяцев назад

      En dónde te encuentras y $_

  • @julianutting5786
    @julianutting5786 2 года назад

    I need new chip for my sony kdl-42w805a mainboard model of chip is 11100212ak a7zg. I need one plz can not get on Ebay. Thanks

  • @fixwiservids
    @fixwiservids Год назад

    There is design problem by Sony and they fix it for free until 06/23 the chip may get short again, because some components needs to be adjusted in order it to work ok .
    Sony actually replacing the new board is without this IC

    • @oaksterbrophy
      @oaksterbrophy Год назад

      How do I contact Sony about a warranty

    • @mrsemifixit
      @mrsemifixit Год назад

      What’s the modification needed?

  • @hilariopenaloza5858
    @hilariopenaloza5858 3 года назад +1

    12:41 do you have a spare “ic” chip you can sell me?

  • @pascuallopez3453
    @pascuallopez3453 3 года назад +1

    0

  • @prmayner
    @prmayner 6 месяцев назад

    Your making me dizzy, can't watch sorry.