How to fix the Logitech MX Master 2s cursor not moving | Easy fix for frozen cursor

How to fix the Logitech MX Master 2s cursor frozen issue, Easy Fix
How to make a USB A to USB C converter | this video will help to convert any USB type A to USB type C
• How to make USB A to U...

[@xNYRVx]

At first, I was skeptical that it could be this easy. Thanks for saving my mouse!

[@SithisXVII]

same

[@pamelakennedy2923]

I love this mouse. As a Graphic Designer, it is my main tool, and when it stopped working, I almost cried. I'm not very techy or mechanical, BUT with your help, I fixed my beloved mouse. THANK YOU!!!!!! 🥳🥳🥳

[@Gomicoo]

I was gifted this expensive mouse, which I've been using for over 5 years. When this broke, I really did not want to downgrade my mouse. THANK YOU for making this video, I was able to fix my mouse and continue using it 😊

[@furleyx]

Just wanted to add my name to the list of those for whom this fix worked. Thank you so much!

[@sebastienleclerc8772]

Some tips after fixing 2 mouses:
- Tools : Phillips 0 (PH0) and Torx 5 (T5) screwdrivers. Thin blade.
- Do not fully remove the non-stick pads: lift both sides of the pads just enough to get to the screws (this way you won't damage the pad so much).
- Do not disconnect the ribbon. The fix is perfectly doable with both parts of the mouse still linked by the ribbon.

[@danielrowett5692]

Thanks!!! This fixed my issue.
Investigating after the fact, there is an alternative way to fix this if you don't want to risk taking the mouse apart.
You can open the "Logitech Options" software and set the "Gesture Button" action to "None". This disables the button, allowing the mouse to start working again even if the button is still stuck.

[@diyeasy_in]

Thanks for the update. This will handy for somebody 🫡

[@anthonyclements6064]

Great Fix! This was exactly what my mouse needed, thanks a lot!

[@RonYates1]

Thanks!! I had to swing by walmart to get a precision screwdriver kit for the top 2 screws, but your video showed the exact resolution for my mouse. Thanks!!

[@johnleivas8028]

Thanks. Fixed mine in less than 5 mins! Easy straightforward video!

[@TreyCamp]

Wow. This was it. Totally fixed it. Just loosened it back ~ .75 turns for each of the (2x) screws and that was good enough for me to feel a good clicking.
I've had this mouse for almost 5 years now, and the past year it has started to have these symptoms past year or so. today became completely unusable. Should have noticed that the thumb button was getting harder to press (and stuck now of course). Now my mouse is smooth as it was when it was new, no lagging. Perfect! (at least for now)
Will update if anything changes, saved me from buying a new mouse! Thanks.

[@SithisXVII]

Thanks for helping me fix mine, have had it for a little over a couple years and it's been one of the best mice I recall using

[@guillermocastillo3711]

Worked perfectly! If you are in a hurry you can try to unstick the stuck button by giving some strokes to the mouse from the bottom up. Will open it and fix it definitely later.

[@jeanbon5282]

I tried to hit my mouse against the desk, until I found out your video. It works far better !

[@TheLotanos]

Amazing! I needed to find a torx screwdriver for the upper screws, but your solution worked like a charm. Thank you!

[@abateditheleme9702]

I managed with the smallest watch screwdriver I had, with some fatigue :)

[@taylannurlu7430]

you saved me from 40$ + 15 repair day. God bless you

[@aaroncastillo6509]

Thank you!! I also have 2 of these mice and was getting so frustrated that my work one stopped working. This fixed my issue

[@FavoritesAG]

Thanks, that was exactly the issue for me. Some notes: a very flat screw driver can work on the star screws at the top (NOT thank you Logitech) and to be careful when removing the white locking mechanism.

[@RC-SATX]

YOU ARE THE BEST! THANK YOU! I love my MX2 and can't live without it. I was about to throw it out and go on Amazon but your video solved my problem!

[@TreyCamp]

Same! Haha stoaked to save it from the landfill

[@Jonasdahljeppesen]

Thank you. Just a heads up. For me it was enough to loosen the 2 screws underneath the thumb button, without actually taking apart the mouse.

[@royhonders]

Yes

[@caiodeleffrate]

Thanks so much. His video saved my work day. For me, it was enough to turn only the top screw, and it worked.

[@alokgupta2k]

Thank you! it worked very well. Two screws (small) needed different small screwdriver.

[@nkmmy]

Thank you very much! it worked! I thought i have to waste money for such expensive mouse after 2 years. Appreciate the sharing!

[@theComput3rNerd]

Thank you so much, I thought I'd have to return it but because of your video its fixed!

[@ElsmoreHomes]

Thank you, just fixed my MX master with your video!

[@onury.2741]

My hero of the day! Just was about to buy a new one, but said I am going to try to fix this and found your vide. Thanks!

[@MisterMarcusSykes]

So nice, I have 2 of these since years and both have the same problem. Normally pressing the side hard unjammed the button, but the cursor stopped completely. Thankfully this hopefully gave my favourite mice a few more years!

[@aidanpattinson5998]

This fixed it for me!

[@GordonFreeman951]

same here ! 2 master 2s and they unjammed the thump button... logitec why ??!!!

[@OysterTran]

I tried this and the problem happens again after a few months of use. This mouse is my a complete trash.

[@rayanthonymadrona988]

Absolutely worked like a charm. Thank you.

[@user-tl6kh1od9g]

Superb, worked a treat! I was about to spend £100 on a new Master MX :)

[@0815DST]

THANK YOU! I never thought that this would really help.🙂

[@ELITExPWNAGE]

Big ups my man, this is what was causing the issue for me!

[@JaganGanti]

Thanks for making this video. exact issue in my mx 2. Instead of opening, I clicked that thumb button properly few times and I think it goes unlocked from the pressed state. The mouse is working fine now.

[@mQumboz]

This solved my problem! huge thanks.
however, many years later this problem came again, tried the same approach, even tried to lift the pcb so far and fixed it with some silicon glue.
in the end, i just ripped off the button (not really I just removed the button mechanism from under the pad. useless button and causes a lot of problems.
This mouse has served me for more than 6 years, I'm not complaining.

[@13didos]

You are a day saver! 🖤 Keep on!

[@My_Legs_Are_OK]

Thank you. I didn't have to disassemble it, just whacked it a few times against my palm, it must have loosened the button and it got better. Not the most elegant solution, but it sure was quick :)

[@SamMasghati]

i have the same problem and will try this asap. had this mouse for 2 years and didnt know there was a button tbh

[@amirshahar3733]

Very detailed and professional, thank you.

[@adalbertoantopia1441]

Exactly as described. I could fix my mouse and it works perfectly again. Thanks!

[@ToddDouglas1]

Worked for me just now! Saved me from buying a nee one! Thanks!

[@jezreelfilms]

Thank you for this! Quick question what kind of allen key did you use?

[@reincarnated3d]

I was about to throw my mouse thinking it was done. Thank you you saved me some money!

[@Gualaguala659]

Omg thank you thank you thank yo!!!
It took me 2 months of stress and only 2 min to fix it thanks to you!!!!

[@ramsesdelr]

You're a lifesaver, this worked perfectly, thanks a lot!

[@LifeIsACurse]

worked for me and did the trick.. thought the latest windows update which just got installed on it's own was the culprit.
never used that side-button, so i was a bit dumbfounded how it caused my dilemma...
thanks again :)

[@mohnishsapra2247]

Thanks Man! Just fixed it. Super easy.

[@jeffrey8859]

Great, saved me purchasing a new mouse. Many thanks

[@bheemprakash7293]

Thanks a ton. This video helped me resolve my issue.

[@davekeebakseng]

Amazing !!! The trick really works !!!

[@FrancoisvanJaarsveldd]

Works like a dream. Thanks !

[@AnanasDataDriven]

Great video!!! Exactly solved my problem. thanks a lot

[@bcchan9122]

You the best!!! You saved me $100. Thank you so much!!🥰

[@ngeshlew]

Thank you! It worked! Also had to buy a tool kit to get this done!

[@davidfox974]

Thank you very much, excellent work my friend

[@radhey0123]

Helped me lot. thank you!

[@Paul70747]

What a great solution!!! it works 100%. Thank you very much

[@volkanilhan2170]

It definitely solved my problem. Thank you very much

[@BrianPelc]

Wow! You just saved me a good chunk of cash! Thanks so much!

[@ThilinaDinithFonseka]

Thanks it saves my mouse ! great video 🎉

[@pierrea.bordonne8326]

le tuto est très clair, merci !
il ne me manque que le tournevis torx , j'ai donc sacrifié la touche du pouce (que je n'ai jamais utilisé) et ma souris est opérationnelle .

[@mellontrainingtutorials]

Great fix thanks a lot!

[@ashfaqanshad5462]

Worked like a charm!❤

[@faisalgrafi3346]

Thanks this videos very helpful

[@jacobdonahoe7407]

very nicely done; thank you!

Amazing video. Helped me a lot.

Yep.. exactly that.
Thanks for sharing

[@ranulfocastillo5355]

Thanks for your help!

[@cristicristi150]

Works great now !!! Thanks

[@Bajumahendra]

Thank you. It works. Money were saved🎉

[@mrcreosote2003]

You saved my life. ❤ thank you!

[@kesimesi]

thx for the fix - saved my mx master

[@joaovictoroliveiracosta5560]

This really saved me. Thx a million

[@yassinemagri6555]

thank you! i was about to buy another one :)

[@clivedias4675]

Worked for me... Thanks a lot...

[@thibaultwalter9165]

It works, I dont have to buy a new mouse thanks a lot !!!

[@shreekantnalawade.4707]

Thank you so much. It's working properly

[@lukasmisko8906]

It works! Thanks man

[@prashantshukla3652]

Thanks so much! It worked!

[@Hugh-zq1mv]

thanks so much, this totally fixed my mouse

[@AliEmad-0x]

Thinks a lot , it worked , big love

[@abateditheleme9702]

It worked. Thanks a lot.

[@DJOrangeJoe]

Nice, this fixed my mouse.

[@a20061005]

Thank you! Saves my mouse 🙌

[@freagul]

My mouse stopped working right in the middle of a project and it was driving me insane. Thank you so much.

[@diyeasy_in]

Glad it helped!

[@jhumelquides540]

Mine is working now! Thanks!!

[@RichardCash-lr7yz]

awesome, it works on my mouse, thank you :)

[@ilpoveropiero]

you saved my day! thanks!

[@ahmedsaeed5149]

Thank you sir. you save my day THANK YOU!!!!

[@yuewang5159]

A BIG Thanks!

[@lxdgr3t]

Thank you for this video!

[@marcusmuretic199]

did the trick!! Thank you!!

[@1812CE]

Thanks mate

[@Brandonhung95]

Thank you! This worked perfectly!!

[@diyeasy_in]

You're welcome!

[@UchiRahmadi]

Great tutor thanks its work..

[@oluwatomisinpauls.9899]

God bless you, I just fixed it...

[@alexio98COD]

Thanks a lot!

[@paweprusakiewicz7813]

Great tutorial. You saved my mouse and a few coins in my wallet.❤❤❤

[@likenihon]

Thanks for sharing.
It's works.

[@cahamilton]

Fantastic, thanks for this! Just saved me from buying a new mouse!

[@Andredesignz]

Thanks

[@A00706187]

Thanks buddy, you got it 👍

[@nvrpnc]

Thanks, that was also the issue my mouse had.