HU-850 No sound fix. Part 1. Disassembly

Поделиться
HTML-код
  • Опубликовано: 3 окт 2024
  • Hi everyone.
    Part one of HU-850 common problem fix called "No sound"
    Non commercial, non professional job :)
    Low quality video, not much editing.

Комментарии • 23

  • @donmoore7785
    @donmoore7785 3 года назад

    I have to disassemble my HU-650, not HU-850. I got stuck at removing the front plastic and whatever comes with it. It looks similar, yet different from this construction. Another guy with an HU-850 removed the front before the sides - interesting to see it can be done both ways. I will try removing the sides next like you did.

    • @TheLeAntony
      @TheLeAntony  3 года назад

      You dont need to remowe the sides. Just two screws on each side. And three little pins on top. Flat screwdriber will work. And that's it. Dont forget to take of 4 little handles.l from front panel. Bass treble and other rwo. Good luck

  • @hapskie
    @hapskie 3 года назад +2

    No part2? Which parts did you swap?

  • @rutamankiene1577
    @rutamankiene1577 3 года назад

    Cool

  • @svyturysje
    @svyturysje 3 года назад

    Front Panel lights not working on HU-850. Maybe you tried to fix it and can share how to do it.

    • @TheLeAntony
      @TheLeAntony  3 года назад

      front panel lights? lcd lights work good? mainly if i remember right there gonna be a light tube issue. i can try to fix for you.

    • @svyturysje
      @svyturysje 3 года назад

      @@TheLeAntony Only button lights does not work. It would be great if you could fix it.

  • @andreaskorsbo1028
    @andreaskorsbo1028 4 года назад +1

    Did u manage to fix the problem and how?

    • @TheLeAntony
      @TheLeAntony  4 года назад +1

      yes. by changing two IC on the board. but not having much time to make part 2 :D

    • @paxanrus
      @paxanrus 3 года назад

      @@TheLeAntony Did you replace two 2SD1760 transistors, or the two resistors on the opposite side?

    • @TheLeAntony
      @TheLeAntony  3 года назад

      @@paxanrus no. Those transistors good. I changed only resistors. Used two 0.25w with leads.

    • @paxanrus
      @paxanrus 3 года назад

      @@TheLeAntony Thanks for a quick reply. I replaced those with 1 watt 1ohm resistors, but it still makes clicking noise and gets loud all of a sudden even when I turn off the stereo. Buttons work fine. I can select fm, am, cd changer, but there is no sound. Just clicking sound every 5 or 10 seconds. Would you think replacing those transistors on the opposite side of resistors would fix it?

    • @TheLeAntony
      @TheLeAntony  3 года назад

      @@paxanrus no. Therebis a problem with sound processors. Under metal plate near those transistors

  • @TheBundyworld
    @TheBundyworld 3 года назад

    I have attempted the fix by replacing the IC controllers under the metal plate. During the process I found two pads chipped-off from the board :( I would add a jumping wire i knew where them traces connect to. Does anyone has an idea if a schematic for those boards exists? Used units are expensive and it's sure they are going to brake sooner or later

    • @TheLeAntony
      @TheLeAntony  3 года назад

      if you provide me some more info, pictures or something, i can try to help find right tracers for you, because i have some donor boards left

  • @03ege
    @03ege 2 года назад

    Hallo. Bei beinem hu 850 kommt es kein sound. Parksensoren und alles kann man nicht hören! Was kann das Problem sein?

    • @TheLeAntony
      @TheLeAntony  2 года назад +1

      Hello schefen. Same problem. Two sound procesing chips.

  • @timothymallon
    @timothymallon 2 года назад +4

    What is it about content providers using this stupid audio when doing a tear down of something? STOP USING THIS DUMP AUDIO! Its better to just be quiet than use the dumb music