The reason for the 1/2 thread has nothing to do with the thread itself. It’s actually designed offset to put the Inside diameter below the bottom of the bucket. This way it will drain completely. If you used shop vac before they never drain completely because the inside of the cap is above the bottom of the tank. PS I have over $9500 worth of ryobi tools and those casters is an insult to ryobi quality. I love the 18v shop vac. Don’t know if I’ll get that one just because those casters won’t hold 80 pounds of water. (Water is 8lbs per gallon for those wondering how I came up with 80 lbs.) love the videos man keep it up.
I think I'll be getting one soon. On another note, I am extremely adamant when it comes to my tools. My best advice I am willing to share is that with my shop VAC, I have taken a pool filter sock and placed it over the VAC filter, also I inserted a filter bag and lastly I connected a defuser filter on the blowout side of the VAC. Trust me! This will prolong the life of the filters and the Shop VAC.
Gonna get one but I will be waiting for the Father’s Day deals. With fuel & heating costs skyrocketing, I appreciate a nice new tool that’s within the battery platform I already have.
A random Google search to see if Ryobi had made it to the 40 volt world with the Shop-Vac. Next, click, home Depot and will have it on St. Patty's Day 🙌 thanks for the vid
I just ordered one, and the reason is (I suspect) the same reason a lot of people are interested in these. My garage power struggles with running high-draw power tools (table saw, planer, router, etc.) and a plug-in shop vac at the same time. After running for a bit, or when the tool is stressed I throw breakers. This has become particularly problematic since I started running laser engraver and 3D printer projects that are disrupted and sometimes ruined by losing power. In the end, I stopped using the shop vac and my shop is a dusty mess. This is my solution, together with a cyclonic separator cart I will build to go with it.
I had similar problems- and it was a rental, so rewiring the garage wasn't an option. I also get a lot of storms which causes me problems. So I ended up going with an Oukitel combo UPS/Battery backup, great for power hiccups or blown breakers- especially for sensitive equipment. I just run longer cables so I can keep them in a dust-free environment. Yes- they're Chinese, but so far the review and my own experience have been good. Just another idea.
The half thread is likely due to the injection mold tooling design for the body. To keep the mold simple the threads are on the bottom mold plate and the body can be released upwards from it.
Great review Brent. What's your thoughts on the push tabs holding the power head over the traditional latches? Does seem as easy to use compared to the latches. Too bad about the cheap casters...the cheap ones are always the first things to break.
Thanks for the comment I think that’s a latches were a economy design I think traditional latches would’ve been better so another words the vacuum has room to grow Ryobi seems to do with this way with most new tool launches
I've only used a wet filter once, sucking up mud. All the other times I just took the filter out or used it as an excuse to replace the orginal filter from 20 years ago lmao.
It's because of the plastic injection mold that made the container. If they put the threads all the way around, they couldn't get it out of the mold couldn't get it out of the mold.
Did I miss where you changed the dry filter for the wet filter?? People need to know that you don’t vacuum water with the dry filter in. The dry filter needs to be removed and the foam filter for water needs to be slid over the cage for the vacuum
I wasn’t impressed with reviews my favorite is the ridgid 9 gallon 18 volt nxt model with 2 9ah octane batteries it runs over 1 hour so pass on this plus the ridgid ones are $96 dollars as of my comment
![ARE ANY WORTH HAVING? RYOBI 18V Wet Dry Vacuums - 1 gal, 3 gal, & 6 gal. [PCL733, PCL734, PCL735]](http://i.ytimg.com/vi/3oBRtc0GyfA/mqdefault.jpg)
The reason for the 1/2 thread has nothing to do with the thread itself. It’s actually designed offset to put the Inside diameter below the bottom of the bucket. This way it will drain completely. If you used shop vac before they never drain completely because the inside of the cap is above the bottom of the tank.
PS I have over $9500 worth of ryobi tools and those casters is an insult to ryobi quality. I love the 18v shop vac. Don’t know if I’ll get that one just because those casters won’t hold 80 pounds of water. (Water is 8lbs per gallon for those wondering how I came up with 80 lbs.) love the videos man keep it up.
need to come out with Ryobi 40v LED lights
I think I'll be getting one soon. On another note, I am extremely adamant when it comes to my tools. My best advice I am willing to share is that with my shop VAC, I have taken a pool filter sock and placed it over the VAC filter, also I inserted a filter bag and lastly I connected a defuser filter on the blowout side of the VAC. Trust me! This will prolong the life of the filters and the Shop VAC.
Gonna get one but I will be waiting for the Father’s Day deals. With fuel & heating costs skyrocketing, I appreciate a nice new tool that’s within the battery platform I already have.
Hopefully they start coming out with other tools like a table saw and a rep saw. Great video! 👍
Thanks!
A random Google search to see if Ryobi had made it to the 40 volt world with the Shop-Vac. Next, click, home Depot and will have it on St. Patty's Day 🙌 thanks for the vid
Got this bad boy for Christmas, I am excited to try it out.
Good video, the only thing else I would like to have seen is how long it run on a full charge on setting 1 and again on setting 2.
I just ordered one, and the reason is (I suspect) the same reason a lot of people are interested in these. My garage power struggles with running high-draw power tools (table saw, planer, router, etc.) and a plug-in shop vac at the same time. After running for a bit, or when the tool is stressed I throw breakers. This has become particularly problematic since I started running laser engraver and 3D printer projects that are disrupted and sometimes ruined by losing power. In the end, I stopped using the shop vac and my shop is a dusty mess. This is my solution, together with a cyclonic separator cart I will build to go with it.
I had similar problems- and it was a rental, so rewiring the garage wasn't an option. I also get a lot of storms which causes me problems. So I ended up going with an Oukitel combo UPS/Battery backup, great for power hiccups or blown breakers- especially for sensitive equipment. I just run longer cables so I can keep them in a dust-free environment. Yes- they're Chinese, but so far the review and my own experience have been good. Just another idea.
The half thread is likely due to the injection mold tooling design for the body. To keep the mold simple the threads are on the bottom mold plate and the body can be released upwards from it.
How many battery lights left on battery after all the vacuuming? And will a 6 ah high performance battery fit it?
you can get the hepa filter for this at Lowe's. It's a Project Source brand.
Does anybody know whats the use of the black circular filter that comes with it? Is it for wet or dry vacuuming... 😅
I like it. I've been wanting a bigger vaccum from ryobi
Just got this on the ultimate discount from Home Depot (possibly online glitch) for 75% off for $50 clearance sale. Debating on keeping or flipping.
Just got one today for $50pretty pleased!
Great video , how s the battery life on this vaccum ? On a 6ah battery
It's good
Will it run off of a cord as well or battery only?
Pretty Nice Vacuum, Might get it myself
Great review Brent. What's your thoughts on the push tabs holding the power head over the traditional latches? Does seem as easy to use compared to the latches. Too bad about the cheap casters...the cheap ones are always the first things to break.
Thanks for the comment I think that’s a latches were a economy design I think traditional latches would’ve been better so another words the vacuum has room to grow Ryobi seems to do with this way with most new tool launches
@@livefreeandtoolon what kind of lawn mower do you have
They don’t have a foam filter for picking up water?
I think so, but I have never used one let the h2o fly!
@@livefreeandtoolon great way to ruin your filter and mislead everyone who watches your vid to do so as well 👎🏻
@@davefoff ruin what filter? When picking water you take the filter off and put it back on for dust and non water debri?
I've only used a wet filter once, sucking up mud. All the other times I just took the filter out or used it as an excuse to replace the orginal filter from 20 years ago lmao.
I baught an open box tool only on eBay $100. I had the battery’s from my lawn mower so it all worked out
It's because of the plastic injection mold that made the container. If they put the threads all the way around, they couldn't get it out of the mold couldn't get it out of the mold.
Did I miss where you changed the dry filter for the wet filter?? People need to know that you don’t vacuum water with the dry filter in. The dry filter needs to be removed and the foam filter for water needs to be slid over the cage for the vacuum
can you use rigid filters?
Not sure will have to look into it
Nope
Can you use filter bag from other brand in this vac?
Yes
Oh looks like you didn't install the filter for wet when you vac from the 10 gallon water 9:38
They need to come out with big fan Ryobi 40v
Bingo
I need that!!!!!!!!!!!!!!!
Nice!
Price?
200.00
@@livefreeandtoolon thank you!
Strangely resembles a dewalt🤔
I wasn’t impressed with reviews my favorite is the ridgid 9 gallon 18 volt nxt model with 2 9ah octane batteries it runs over 1 hour so pass on this plus the ridgid ones are $96 dollars as of my comment
they (ridgid) discontinued them and one of my battery slots just got fried, but you're right, the rigid 9 gallon smokes this one for half the price
@@mainsource8030 they were clearances out at $38 dollars
The fact that the hose isn't 2¼" is disappointing.
New to these kinds of vacs. Why is 2 1/4 diameter hose useful?
@@tizben: It would be able to suck up bigger items and it is a more common size (and therefore it would be easier to find compatible accessories).
@@chengliu872 thank you