Installing front and rear crankshaft seals on Subaru 2.5 engine

Поделиться
HTML-код
  • Опубликовано: 8 сен 2024
  • As you will see this is an easy job and if you screw it up then a new seal will be needed. Guess I should order another.

Комментарии • 11

  • @pedlpower
    @pedlpower 2 месяца назад

    Do not drive the seal until it bottoms. There is a drain hole at the bottom that will be blocked and the seal will leak. Drive it until the seal is even with the inside bevel and stop.
    These large rear main seals can be a bear to install correctly. Pieces of PVC pipe and PVC pipe end caps can help to drive them.
    Inspect the air/oil separator plate. The aluminum and plastic ones were known to crack. Subaru has superseded with a steel one.

  • @tedharris6066
    @tedharris6066 2 месяца назад

    Well that ended badly, there's always more seals out there.😅

  • @LooneyFarmGuy
    @LooneyFarmGuy 2 месяца назад

    I don't need to worry about Shingles anymore . I got the vaccinated for that 😂

    • @crazybillsgarage
      @crazybillsgarage  2 месяца назад +1

      Yeah I need a vaccine for roof shingle.😅

  • @LooneyFarmGuy
    @LooneyFarmGuy 2 месяца назад

    I would say you should get 2 more 😜

  • @LooneyFarmGuy
    @LooneyFarmGuy 2 месяца назад

    Well I have nothing better to do ....... So here I am 😂