Deutsch DTM Series Connectors

DEUTSCH DTM Series connectors are the answer to all of your smaller wire gauge applications. Building on the DT design strengths, the DTM connector line was developed to fill the need for lower amperage, multi- pin, inexpensive connectors. The DTM Series offers the designer the ability to use multiple size 20 contacts, each with 7.5 amp continuous capacity, within a single shell.
#deutsch #connector #dtm
Product Link: www.deutschcon...
KEY FEATURES:
Accepts contact size 20 (7.5 amps)
16-22 AWG
2, 3, 4, 6, 8, and 12 cavity arrangements
In-line, flange, or PCB mount
Rectangular, thermoplastic housing
Integrated latch for mating
Wedgelocks assure contact alignment and retention
MATERIAL SPECIFICATIONS:
Grommet: Silicone rubber
Insert Retainer: Thermoplastic
Receptacle Interfacial Seal: Silicone rubber
Shell: Thermoplastic
Wedgelocks: Thermoplastic
PERFORMANCE SPECIFICATIONS:-
DEUTSCH electrical connectors will stand up to the harsh environmental challenges that are common to industrial markets that require advanced performance. Proper parts, procedures, and tooling must be used.
TEMPERATURE
Operating at temperatures from -55° C to +125° C continuous at rated current.
DURABILITY
No electrical or mechanical defects after 100 cycles of engagement and disengagement.
VIBRATION
No unlocking or unmating and exhibits no mechanical or physical damage after sinusoidal vibration levels of 20 G’s at 10 to 2000 Hz in each of the three mutually perpendicular planes. No electrical discontinuities longer than 1 microsecond.
PHYSICAL SHOCK
No unlocking, unmating, or another unsatisfactory result during or after 50 G’s in each of three mutually perpendicular planes. No electrical discontinuities are longer than 1 microsecond. MIL-STD 202, Method 213, Condition “C”.
FLUID RESISTANCE
Connectors show no damage when exposed to most fluids used in industrial applications.
INSULATION RESISTANCE
1000 megohms minimum at 25° C.
MOISTURE RESISTANCE
Properly wired and mated connections will withstand immersion under three feet of water without loss of electronic qualities or leakage.
DIELECTRIC WITHSTANDING VOLTAGE
Current leakage less than 2 milliamps at 1500 VAC.
THERMAL CYCLE
No cracking, chipping, or leaking after 20 test cycles from -55° C to +125° C.
Our Social Media
Facebook: / deutsch.connectors
Instagram: / deutsch_connectors
Twitter: / deutschplugs
All products are available online, supplied worldwide, and delivered to your door