Hi. What is the factory settings code of tha 10.1? That one in the midle lol. I want to reset mine, but i didnt know the factory reset code. Thanks in advance
Originally the car comes with J1 oil. And also the Inspira 2.0 gearbox is designed with Mitsubishi CVT J1 oil. However, for better heat dissipation, I recommend a full flush and replace with Mitsubishi CVT J4 oil.
that's odd. Re-check your wiring. It should not have affected your cruise controls. As for the audio controls, you will need to program it in the player.
Just want to ask. Where do I connect that red 12v antenna booster power cable to? My android player radio reception sucked. Will buy that booster next week.
I connected it to the ACC cable going into the player. That was, it only turns on when I turn the key to ACC. Its normally the red cable. Three cables for power is Red (ACC), Yellow (Batt) and Black (Negative)
Hi TC, i have managed to change my stock radio unit to Android player 10.0. But the radio is weaker than the original and the GPS wont work. Do you have any suggestion? Appreciate your reply, Thanks
I have never had any good experience with aftermarket radio receptions. What I did was download an app to stream radio and go from there. GPS won't work, check if the GPS antenna is plugged in correctly and also what app are you using. I used Google Maps and Waze, seems to be good. What version is your Android player? Android 8 or 9?
Mine is a Proton R3 carpet. Got it from R3 motorsport division of Proton. The original mat that came with the car was a black coil mat which over the years have seen better days.
if its the factory camera, then you will need new wiring. I heard of converters but I have not had a chance to work with those. If your existing camera is aftermarket, chances are you can re-use the existing wiring
my dashboard have no rattling sound.... but i did do a video on soundproofing the dashboard ruclips.net/video/nkUnymYhmHw/видео.html Also if you search around my channel, i did another video on how to remove the dashboard.
Hi TC, Great DIY! what's the quality of bluetooth hands free phone connections using new unit? Alteenatively can you still use stock Bluetooth after installing new unit? Looking forward for next mods and videos.
TC, i have so many questions haha. but i really need your guide on how to wire tap for the fm booster. i installed android player. signal not that bad but not that good either. wanna try using fm booster and see hoe it goes. dunno which wire to tap
FM Booster - 2 wires, 1 to ground (just connect it to the metal part of the body), 1 more for the positive power (tap it to the Acc wire) However, I have used FM Booster before and its not really useful. It boost clear signal, but if you are in a rather poor signal area, it gets worst. I don't recommend using FM Booster.
i am not familar with GTE touchscreen player. But the player alone should not cause the car not to start. Who installed it for you? I suspect there is a short in the wiring. Check your fuses if there is any fuse burned.
@@TCsAnythingGoes i change at halfcut shop. They said maybe ETACS problem or need a CANBUS decoder, because if change back to Clarion player everything is okay.
@@俊章-q9h hmmmmm, i won't trust halfcut shops with car wiring as they specialized in removing stuff from the car and not installing them back. It could also mean the GTE player is faulty. Or the GTE player runs a different wiring pinout compared to the older lancers.
i don't mind selling but gotta let you know first that the player is working fine except the radio reception for this unit is really bad and the screen brightness is stuck at maximum. Cannot reduce the brightness which can be annoying to use at night.
Even after so many years, still got people butthurt on the fact that Mitsubishi gave Proton the rights to produce Inspira based on the Lancer 08. I am truly sorry for you..... both mentally and financially. Peace be with you and lets just all learn and teach together regardless of which make our cars are from.
Can you share the link on the Android player that you bought from Shopee
thanks for the video . im looking one ispira because i really love the inspira and luckily i found your channel full with inspira video❤️
Glad that you love the contents. More to come and yes Inspira is a really nice car to drive.
Hi. What is the factory settings code of tha 10.1? That one in the midle lol. I want to reset mine, but i didnt know the factory reset code. Thanks in advance
How to setup wire for reverse camera ? Just plug and play or need to mod
Helo bro.. Gearbox cvt oil mitsubishi J1 boleh ngam dgn inspira 2.0P?ok ke pakai oil tu? Xde masalah pada gearbox?
Originally the car comes with J1 oil. And also the Inspira 2.0 gearbox is designed with Mitsubishi CVT J1 oil. However, for better heat dissipation, I recommend a full flush and replace with Mitsubishi CVT J4 oil.
Is J4 better than J1? Since recommended is J1. What is the main reason to replace from J1 to J4? Tq👌
I had problem with my control on stearing. The radio unit and cruising control doesn't work after installing it.
that's odd. Re-check your wiring. It should not have affected your cruise controls.
As for the audio controls, you will need to program it in the player.
@@TCsAnythingGoes im gonna get it checked. Because it only happens after the android installation
Just want to ask. Where do I connect that red 12v antenna booster power cable to? My android player radio reception sucked. Will buy that booster next week.
I connected it to the ACC cable going into the player. That was, it only turns on when I turn the key to ACC. Its normally the red cable. Three cables for power is Red (ACC), Yellow (Batt) and Black (Negative)
Hi TC, i have managed to change my stock radio unit to Android player 10.0. But the radio is weaker than the original and the GPS wont work. Do you have any suggestion? Appreciate your reply, Thanks
I have never had any good experience with aftermarket radio receptions. What I did was download an app to stream radio and go from there. GPS won't work, check if the GPS antenna is plugged in correctly and also what app are you using. I used Google Maps and Waze, seems to be good.
What version is your Android player? Android 8 or 9?
@@TCsAnythingGoes Thanks for your reply, GPS was not plugged in correctly. Yes, i use app to stream radio. Its version 9 android. It is working.
back wire ...for what..reves camera ?
Bro where u get lancer black carpet ?
Mine is a Proton R3 carpet. Got it from R3 motorsport division of Proton. The original mat that came with the car was a black coil mat which over the years have seen better days.
the reverse camera wire come with the player can fit with ori mitsubishi reverse camera wire or need change the adapter
you will need to get an adapter for this. The original mitsubishi reverse camera wire is a socket instead of just bare wire.
@@TCsAnythingGoes any chances u can make a video hw to do it?
Do you manage to get the volume control from steering wheel working with the new set?
Yes I did. Just had to program it in the settings.
Reverse camera ? Need new wiring or can use the old one pnp?
if its the factory camera, then you will need new wiring. I heard of converters but I have not had a chance to work with those.
If your existing camera is aftermarket, chances are you can re-use the existing wiring
@@TCsAnythingGoes tq vry much for your feedback. Keep it up uploading video about inspira 👍 love your channel very much 👍❤️❤️❤️❤️❤️❤️
link for the Android radio?
does your dashboard have any rattling sound/noise?.. if yes maybe you can share a video to fix those noise will be very helpful..
my dashboard have no rattling sound.... but i did do a video on soundproofing the dashboard
ruclips.net/video/nkUnymYhmHw/видео.html
Also if you search around my channel, i did another video on how to remove the dashboard.
Do all the buttons on the steering wheel still work after the installation??
yes it does. All works fine.
hello TC where u get 10.1 evo x casing..( the middle 1)
It is integrated with the player. Cannot be separated out else the screen might break.
yes correct 100%
does your new head unit casing fit perfectly into the dashboard? Mine is not 100% fit.....
Mine fits 100%. No gaps.
@@TCsAnythingGoes how did you do that? Mine didn't fit properly especially on the right and left upper side
@@faizazhar2727 did nothing actually.It just fitted perfectly when I installed it. Same goes with the previous android unit i had.
Hi TC, Great DIY!
what's the quality of bluetooth hands free phone connections using new unit?
Alteenatively can you still use stock Bluetooth after installing new unit?
Looking forward for next mods and videos.
So far so good. I have not had anyone telling me that they couldn't hear me. I am using a Samsung Galaxy S8+.
TC, i have so many questions haha. but i really need your guide on how to wire tap for the fm booster.
i installed android player. signal not that bad but not that good either. wanna try using fm booster and see hoe it goes. dunno which wire to tap
FM Booster - 2 wires, 1 to ground (just connect it to the metal part of the body), 1 more for the positive power (tap it to the Acc wire)
However, I have used FM Booster before and its not really useful. It boost clear signal, but if you are in a rather poor signal area, it gets worst. I don't recommend using FM Booster.
@@TCsAnythingGoes i see. noted TC. tq tq
Can you make video on AC switch panel removal. My AC panel switch is loosen from one side and i don't know how to fix it.
You mean to dismantle the AC switch panel? or just remove the AC switch panel from the dashboard?
@@TCsAnythingGoes i mean to remove the ac switch panel from the dashboard
Inspira change to GTE touchscreen player, but can't start the car.....what is the problem?CANBUS?
i am not familar with GTE touchscreen player. But the player alone should not cause the car not to start. Who installed it for you? I suspect there is a short in the wiring. Check your fuses if there is any fuse burned.
@@TCsAnythingGoes i change at halfcut shop. They said maybe ETACS problem or need a CANBUS decoder, because if change back to Clarion player everything is okay.
@@俊章-q9h hmmmmm, i won't trust halfcut shops with car wiring as they specialized in removing stuff from the car and not installing them back. It could also mean the GTE player is faulty. Or the GTE player runs a different wiring pinout compared to the older lancers.
inspira same wiring or not....if buy online andriod can use ther socket pnp to inspira
This unit came with the wiring adapter for Inspira/Lancer. Generic ones may not. That said, Inspira and Lancer uses the same wiring for the headunit.
hi tc.. wiper switch proton inspira berapa harga? ada tanya kedai sparepart keramat harga rm900.. betul ke
ni benda rare susah rosak ni. I cuba cari online tak jumpa pulak. Ebay dalam 40 USD tapi shipping 80 USD.
@@TCsAnythingGoes wiper ok boleh guna, cuma di switch fast n slow wiper tak function.. anyway thanks..
Where can i buy the 8.1 player?
i got it off Shopee. But nowadays, I suggest you get the Android 9 players with minimum 2GB Ram. Has more features.
Wow doing RUclips video! Good job bro
where can i buy this ?
I usually by my stuff from Shopee.
bro this will fit on lancer 2010 SE?
if its the same dashboard design, it should.
hi TC, that old one 4.1 android. wannt sell ? :) i intersting cyberjaya area.
i don't mind selling but gotta let you know first that the player is working fine except the radio reception for this unit is really bad and the screen brightness is stuck at maximum. Cannot reduce the brightness which can be annoying to use at night.
Where do u buy that player?
Got it from Shopee. Just search for Lancer Android Player. A lot of choices from which version of Android, how much RAM and what type of screen
Useful video
Thanks a lot
nice diy!
Thank you so much for the compliment.
Why always "aaaaa" "aaaaa" hehe
nice video. 09:28 is that your daughter?
Thanks for your compliment. Yeah, that's my daughter. She loves to climb into the car whenever I am dismantling it.
@@TCsAnythingGoes so cute :-)
Pls stop awww awwww awww
Thank you for your feedback. Will definitely try to improve on that. Much appreciated.
andriod player ....most radio signal very bad reception
surprisingly..... this unit is able to receive radio stations pretty well.
how to install fm booster...just tapping acc wire ?...or new wiring
@@dinmj1827 I just tap it to the acc wire that is going to the headunit.
Lancer ori 08 jdm Anti InsPirate mdm tht sucks
Even after so many years, still got people butthurt on the fact that Mitsubishi gave Proton the rights to produce Inspira based on the Lancer 08. I am truly sorry for you..... both mentally and financially. Peace be with you and lets just all learn and teach together regardless of which make our cars are from.
@@TCsAnythingGoes these guys are the hardcore troll for inspira. I notice them on every inspira video.
@@TCsAnythingGoes yeah still have these kind of people even on 2020 haha