My personal view as the 360camera user on inspira: 1) later they will effect the gear sensor, once pull off the camera then can change gear, dunno wiring prob or others 2) if let the camera 24hour, the module will heat, maybe u can do heatsink on module. Anyway, u did a very goodjobs bro!
It should not affect the gear sensor at all cause it does not tap to any gear wiring. I did tap it to the reverse light at the rear which is what all reverse camera does. I was more concerned on the battery drain as it is running all the time. One way for this would be to disconnect the 12V line........ but again that means settings will run everytime you off the engine. Perhaps I will add a heatsink in the coming upgrade.
@@TCsAnythingGoes or you could add a secondary mini 12V battery charged by main battery or solar (most car manufacturers are doing that nowadays). Or you could design a circuit board that will reduce the milliamps needed to keep the 360 circuit board on at all times. This will reduce the main battery draining. And a chip that will allow for sleep mood.. this way it will only aquire power to keep the 360 board on at all times, and incase of a hit (shock sensor) then it will wakeup from sleep mood to wake and give the full power.
Great job! I like the idea, would be great to see full usability of this equiment in real test drive. Very good hints how to thread the wires and how to dismantle/assemble all new hardware. Just please explain how to connect the wires more clearly next time ;) Cheers from Poland
Yes, I plan to make another video once I finish up the wiring and change to an IPS screen player. Will show the full functionality of the equipment by then. Thanks for your suggestion, I will explain more on the wiring in the next video as I got a few other feedbacks that the wiring portion is too short to understand what I was doing.
I don't have a link for the paper installation. It came in the box. But my model of 360 camera is old and there are newer ones with better function than mine nowadays ( functions like 3D view and all round AHD cameras)
Hi there!Yellow and blue got red wires by the system , do they need to be conected also ?? In my case i connected just the red wire from the yellow (back camera)in front to the pink cable …. Rest of them from blue and red (sides cameras)did not conect nowhere, that right ?
red wire from blue and red (side cameras) if you want to connect, you will need to tap it to the signal lights (left and right according to which camera is left and right). If you choose not to connect, its fine as well.
The left and right red wire I got conected in one end to left and right turn signal but on another end by the system red wires from both sides did not have any connection that right ?
Como activo la aplicación 360 mi radio tiene la aplicación pero en l configuración no está la opción de activar cámara ! Como me pueden ayudar mi radio si trae la conexión de 360
hi.. thanks for making this video I did exactly same as you did and looks likr same model camera & pro essing box too unfortunately I did not see your video before installing my 360 cam.. I installed it after 6 months buying...so many trial and error including punching wrong location on side mirror..hahaha..first I installed in too much outside & blocking the mirror movement. anyway..I enjoy this video as recap of what I did salam from indonesia
first mistake - last mistake. i like the way you put the fan outside just similar to me when i'm working with my car. it's so burning hot outside. good video anyway
Thanks for your support. Yes you are correct about the hot weather. If I don't put a fan there, I will not be able to work properly with my sweat dripping all over the place.
Hi guys this is video super I like it this my feelings 360 camera new Varna moko brand all camera working condition but he was revised cut off the all camera open reverse ok all cameras but the neutral not working camera all camera not working in neutral
Hi Mate, thanks for the video. Great job! I've placed my order and still waiting for the cameras to arrive as its coming all the way form China and I am based in UK. Going through the various videos on the youtube and your video seems to be perfect but its not clear that where you connect the signal cable from wing mirror to? Could you please advise where you connected the signal cable from side wing mirrors?
yeah, it still works. The signal cable is just to signal the 360 unit to show you the side camera view when you turn on your signal (much like the rear camera)
14:09 Hello I bought the same kit. Please help. i do not know how to install the rear camera support. There are 2 transparent pieces, one base piece and one attached to the camera. How do you attach them together?? Thank you
In the transparent base there are 2 grooves. On the camera transparent base there are 2 tabs. Insert the tabs in the grooves and push down and it will be plugged properly. You should hear a click. make sure you screw the transparent base piece to the back of your car before you plug the camera to it.
i got it off the internet many years back. I think it was Mudah.my.........its anti glare and has signalling function but I kinda lost the cable for it.
Thanks for uploading this video. Very informative. I have a reverse camera that I bought online and would like to connect it to my stand alone GPS unit which has a Video input. However, it needs to be powered up. How do I power it up using the reverse lights? I only want it to be switched on when I am on reverse gear. Would appreciate any help. Tks again.
It depends what kind of connector your reverse camera is using. But typically Black is to Ground and Yellow is to Positive (which you can tap it to the reverse light). Red is for the trigger input in which you can connect it to the reverse light as well.
@@TCsAnythingGoes Thanks for replying. My camera has a red and a black cable. So, once I connect the red to the reverse light, how do i ground the black wire?
@@bajcl69 to ground it, just find any bolt that is bolted to the car body, loosen it and connect the black cable to it. Unless your black cable is a 4 pin connector then its a different method.
There is one cable and one wire coming from each camera. The cables are easily Identified but the colors (red, blue) left and right camera, (black, yellow) front and back camera. These cables power the camera and send video signals to the 360 processor. If you plug the system using the cables only you will see default images. And if you want to see only one camera at a time you will have to use the remote. If you want to view individual cameras automatically without using the remote that's when you use the wires. So if you want to see the left side mirror as default then you must connect the "small wire" from the camera to the 12V left turn signal. Same to the right. And reverse you connect the reverse camera wire to the reverse wire power. The easiest way to get to reverse wire is via rear reverse lights. Open rear light housing and find the reverse bulb. Attach wire from reverse camera to the power on reverse bulb of your car. Once that is done every time you put gear in reverse the rear camera will be the default camera. Some cars have the reverse wire already on the stereo head unit. In that case you could use the other end of your reverse camera cable you will also find another reverse wire which you can connect to reverse wire of head unit and that should also do it. Each camera has that option (power wire at both ends of cable). I hope that helped
@@TCsAnythingGoes because what happen to mine is, the camera on right side become like mirror, the back side goes in front and front goes to back, any idea whats the problem? Thanks a lot for reply
@@ljudd143 ohhh... just turn ur camera till you get the correct angle. I am assuming your car body is showing on the right side of the screen as well when u are using the right camera
Hi, TC. I m from kedah ..need some advise from u ...i hv a similar 360 as yours. As a trial, i conneted the control box to a 12v n the signal out to a display. But, the display show no signal. According to yr experience , what could hv i done wrong ? Fyi, i saw the red led on control box flashing for ard 2min after connected to a 12v n light off after that ...could it be wiring issue or box issue ...???
of course, all cameras were connected ..😊😊..finally i found out that i need to use remote to turn the box on n the image appeared on the display.....my set is working just fine like yours now.anyway , thx again for yr responds..😊
masih pakai sampai sekarang. ada la gatal jugak nak tukar pada yg ada 3D dan pakai AHD camera tapi memandangkan belum rosak so batal niat sementara waktu.
Don't think youtube will allow me to put a link cause that would be like a sponsored post. But you can go to Shopee and search for 360 camera or birdview camera.
@@AMINAMIN-ix6vi mine was something like this. shopee.com.my/360%C2%B0Car-Parking-Assistance-Panoramic-View-All-Round-Rearview-Camera-System-i.83375329.1948599646?position=5 But there are more modern models available like those that has 3D view and such. You might wanna search around Shopee and Aliexpress to see which one suits your budget and needs.
Dia datang sekali ngan set 360 i. Kalau takde, boleh je pergi kedai hardware tuk cari hole saw. Bawa sekali 1 biji camera tuk reference size yg diperlukan.
Hi there, Thanks for the video. I bought a same unit. Is it necessary to connect both the red (ACC) wire and yellow (B+) wire to the respective power sources? Can I can connect just the yellow cable? Thank you in advance
You will need to connect both. Or at least you need to connect the Red (Acc) cable. Yellow cable is for standby power (after the car is turned off) but what really activates and turns the unit on is the Acc cable.
Thank you for your prompt response. I did connect only the red (ACC) cable but the power-on indicator red light on the control unit did not even lite up. Will it be alright if you could WhatsApp me at 012-3869583. Appreciate it
Hi mate..where to get Birdseye camera system. My car already installed with Android player. Please suggest me what items need to buy for getting Birdseye system. Thanks in advanced. Cheers!
Thanks for posting this, it's convinced me that this is something I need to take to a professional 😅
Thank you so much, hope to do this one day. Still good to learn the ins and outs of my own lancer.
Thank you for your support. I strive to make this channel an educational one where we get to learn more DIY.
My personal view as the 360camera user on inspira:
1) later they will effect the gear sensor, once pull off the camera then can change gear, dunno wiring prob or others
2) if let the camera 24hour, the module will heat, maybe u can do heatsink on module.
Anyway, u did a very goodjobs bro!
It should not affect the gear sensor at all cause it does not tap to any gear wiring. I did tap it to the reverse light at the rear which is what all reverse camera does.
I was more concerned on the battery drain as it is running all the time. One way for this would be to disconnect the 12V line........ but again that means settings will run everytime you off the engine. Perhaps I will add a heatsink in the coming upgrade.
@@TCsAnythingGoes ya.. mine will on after start engine, which mean evryday need to set the date..
The camera calibration will not effect, just date
@@TCsAnythingGoes or you could add a secondary mini 12V battery charged by main battery or solar (most car manufacturers are doing that nowadays). Or you could design a circuit board that will reduce the milliamps needed to keep the 360 circuit board on at all times. This will reduce the main battery draining.
And a chip that will allow for sleep mood.. this way it will only aquire power to keep the 360 board on at all times, and incase of a hit (shock sensor) then it will wakeup from sleep mood to wake and give the full power.
Hi. I like your video and I subscribe. I would to ask where did you connect the signal wires. Many thanks
Great job!
I like the idea, would be great to see full usability of this equiment in real test drive.
Very good hints how to thread the wires and how to dismantle/assemble all new hardware.
Just please explain how to connect the wires more clearly next time ;)
Cheers from Poland
Yes, I plan to make another video once I finish up the wiring and change to an IPS screen player. Will show the full functionality of the equipment by then.
Thanks for your suggestion, I will explain more on the wiring in the next video as I got a few other feedbacks that the wiring portion is too short to understand what I was doing.
Very informative video. Keep it up bro! Very helpful.
Hi there, great and informative video guide, what about the 360 software/app is it already in your head unit?
the software is in the 360 module box. The head unit only serve as a display for when the reverse is triggered.
6:11 that’s a Torx bit
Great video. Could you please post a link to the paper installation instructions as well as where you bought this?
I don't have a link for the paper installation. It came in the box. But my model of 360 camera is old and there are newer ones with better function than mine nowadays ( functions like 3D view and all round AHD cameras)
Hi there!Yellow and blue got red wires by the system , do they need to be conected also ?? In my case i connected just the red wire from the yellow (back camera)in front to the pink cable …. Rest of them from blue and red (sides cameras)did not conect nowhere, that right ?
red wire from blue and red (side cameras) if you want to connect, you will need to tap it to the signal lights (left and right according to which camera is left and right). If you choose not to connect, its fine as well.
The left and right red wire I got conected in one end to left and right turn signal but on another end by the system red wires from both sides did not have any connection that right ?
Como activo la aplicación 360 mi radio tiene la aplicación pero en l configuración no está la opción de activar cámara ! Como me pueden ayudar mi radio si trae la conexión de 360
Nice and neat job,
hi..
thanks for making this video
I did exactly same as you did and looks likr same model camera & pro essing box too
unfortunately I did not see your video before installing my 360 cam..
I installed it after 6 months buying...so many trial and error including punching wrong location on side mirror..hahaha..first I installed in too much outside & blocking the mirror movement.
anyway..I enjoy this video as recap of what I did
salam from indonesia
Salam from Malaysia. I almost installed the side mirror camera wrongly as well. Almost punch the wrong location for the wires. Fun DIY indeed.
At min 17:35
Dimana sambung wayar merah yang ada pada setiap wayar biru kuning dan merah tu?
first mistake - last mistake. i like the way you put the fan outside just similar to me when i'm working with my car. it's so burning hot outside. good video anyway
Thanks for your support. Yes you are correct about the hot weather. If I don't put a fan there, I will not be able to work properly with my sweat dripping all over the place.
Hello, have you connected the signal cable coming from the mirrors to a cable on the radio?
Thank you for the video. How do you unplug the little harness that connects to the tweeter? I can't get it off..
There is a locking mechanism. Press it down and pull it out.
Thnx
Thank you so much"
Hi. Good Video. Where can i Buy this System ?? Have you a Link ? Thank you from old Germany.
U😊00rfgp😅
Hi guys this is video super I like it this my feelings 360 camera new Varna moko brand all camera working condition but he was revised cut off the all camera open reverse ok all cameras but the neutral not working camera all camera not working in neutral
Hi Mate, thanks for the video. Great job! I've placed my order and still waiting for the cameras to arrive as its coming all the way form China and I am based in UK. Going through the various videos on the youtube and your video seems to be perfect but its not clear that where you connect the signal cable from wing mirror to? Could you please advise where you connected the signal cable from side wing mirrors?
I actually ended up not connecting the signal cable for the side mirrors.
@@TCsAnythingGoes thanks for prompt response. will it work without connecting the signal cable for side wing mirrors?
yeah, it still works. The signal cable is just to signal the 360 unit to show you the side camera view when you turn on your signal (much like the rear camera)
Do a video on the head entertainment unit in the car.
you mean a walk through on the headunit?
where you buye the 360 camera?? please put the link below..
Nice bro...
Thank you for your kind words.
Great!!
Bro. Need your help. Where do i connect the wire that triggers turn signal?
14:09 Hello I bought the same kit. Please help. i do not know how to install the rear camera support. There are 2 transparent pieces, one base piece and one attached to the camera. How do you attach them together?? Thank you
In the transparent base there are 2 grooves. On the camera transparent base there are 2 tabs. Insert the tabs in the grooves and push down and it will be plugged properly. You should hear a click. make sure you screw the transparent base piece to the back of your car before you plug the camera to it.
May I know where you get the blue mirror?
the side mirror?
@ yes
TC, where you get the blue side mirror? Anti glare right.
i got it off the internet many years back. I think it was Mudah.my.........its anti glare and has signalling function but I kinda lost the cable for it.
where to buy the 360 camera kit ?
Thanks for uploading this video. Very informative. I have a reverse camera that I bought online and would like to connect it to my stand alone GPS unit which has a Video input. However, it needs to be powered up. How do I power it up using the reverse lights? I only want it to be switched on when I am on reverse gear. Would appreciate any help. Tks again.
It depends what kind of connector your reverse camera is using. But typically Black is to Ground and Yellow is to Positive (which you can tap it to the reverse light). Red is for the trigger input in which you can connect it to the reverse light as well.
@@TCsAnythingGoes Thanks for replying. My camera has a red and a black cable. So, once I connect the red to the reverse light, how do i ground the black wire?
@@bajcl69 to ground it, just find any bolt that is bolted to the car body, loosen it and connect the black cable to it. Unless your black cable is a 4 pin connector then its a different method.
@@TCsAnythingGoes Thanks TC. Have a great week ahead!
@@TCsAnythingGoes TQ
bro,can u maka a video to install car autolight sensor pls? i cant find this video in youtube.
model and reference of the radio and lik for the 360 system
Some cars have signal light on the side mirror. So the camera 12v cable actually can be connected to this side mirror signal light wire, right?
There is one cable and one wire coming from each camera. The cables are easily Identified but the colors (red, blue) left and right camera, (black, yellow) front and back camera. These cables power the camera and send video signals to the 360 processor. If you plug the system using the cables only you will see default images. And if you want to see only one camera at a time you will have to use the remote. If you want to view individual cameras automatically without using the remote that's when you use the wires. So if you want to see the left side mirror as default then you must connect the "small wire" from the camera to the 12V left turn signal. Same to the right. And reverse you connect the reverse camera wire to the reverse wire power. The easiest way to get to reverse wire is via rear reverse lights. Open rear light housing and find the reverse bulb. Attach wire from reverse camera to the power on reverse bulb of your car. Once that is done every time you put gear in reverse the rear camera will be the default camera. Some cars have the reverse wire already on the stereo head unit. In that case you could use the other end of your reverse camera cable you will also find another reverse wire which you can connect to reverse wire of head unit and that should also do it. Each camera has that option (power wire at both ends of cable).
I hope that helped
Music turns off when 360 camera is turned on. Any solutions?
I will be waiting for a reply . Thanks 👍🏾
I can’t get mine to work properly the camera stays on in park can u help me please
for side cameras which mount should we use, straight or angled one?
i used the angled ones
best
Wire trigger dari left and right tu yg bhagian player android tu nk sambung dkt wire mne ye??
the camera for left and right window has mark right for right and lef for left or it doesnt matter?
There is a mark, but you can mostly ignore it cause you can just connect the cameras at the unit according to how you installed it.
@@TCsAnythingGoes because what happen to mine is, the camera on right side become like mirror, the back side goes in front and front goes to back, any idea whats the problem?
Thanks a lot for reply
@@ljudd143 ohhh... just turn ur camera till you get the correct angle. I am assuming your car body is showing on the right side of the screen as well when u are using the right camera
thanks a lot bro. now its working good. 🤜🤛🏻
Saya suka kereta inspira. Tahun depan mahu beli. Harga berapa kereta inspira?
dari 30k ke atas depends on condition dan jajan
Kereta awak berapa cc?
Hi, TC. I m from kedah ..need some advise from u ...i hv a similar 360 as yours. As a trial, i conneted the control box to a 12v n the signal out to a display. But, the display show no signal. According to yr experience , what could hv i done wrong ? Fyi, i saw the red led on control box flashing for ard 2min after connected to a 12v n light off after that ...could it be wiring issue or box issue ...???
do you have the cameras connected to the box yet?
of course, all cameras were connected ..😊😊..finally i found out that i need to use remote to turn the box on n the image appeared on the display.....my set is working just fine like yours now.anyway , thx again for yr responds..😊
Sekarang masih ok lagi ke boss?Atau dah tukar lain?Saya baru order semalam lepas tu baru terjumpa video ni...
masih pakai sampai sekarang. ada la gatal jugak nak tukar pada yg ada 3D dan pakai AHD camera tapi memandangkan belum rosak so batal niat sementara waktu.
@@TCsAnythingGoes walaupun kita off kunci dia akan record jugak ke?Atau masa on kunci je baru record?
bro can i have the link for this item. thank you
Don't think youtube will allow me to put a link cause that would be like a sponsored post. But you can go to Shopee and search for 360 camera or birdview camera.
I already have a android player. If i buy 360 set camera can i install it on my android player ?!?
Yes, that's what i did.
@@TCsAnythingGoes do yo have link where can i buy it??? 360 camera set
@@AMINAMIN-ix6vi mine was something like this.
shopee.com.my/360%C2%B0Car-Parking-Assistance-Panoramic-View-All-Round-Rearview-Camera-System-i.83375329.1948599646?position=5
But there are more modern models available like those that has 3D view and such. You might wanna search around Shopee and Aliexpress to see which one suits your budget and needs.
Remote dia guna bateri APA ya?
alat nak tebuk side tu beli dkt mana ea ? sy ada 360.. mahu pasang sendiri..
Dia datang sekali ngan set 360 i. Kalau takde, boleh je pergi kedai hardware tuk cari hole saw. Bawa sekali 1 biji camera tuk reference size yg diperlukan.
can record?.
this particular model can record if i put in a SD card. But i did not put it in so its just displaying only.
Hi there,
Thanks for the video.
I bought a same unit.
Is it necessary to connect both the red (ACC) wire and yellow (B+) wire to the respective power sources? Can I can connect just the yellow cable?
Thank you in advance
You will need to connect both. Or at least you need to connect the Red (Acc) cable. Yellow cable is for standby power (after the car is turned off) but what really activates and turns the unit on is the Acc cable.
Thank you for your prompt response.
I did connect only the red (ACC) cable but the power-on indicator red light on the control unit did not even lite up.
Will it be alright if you could WhatsApp me at 012-3869583. Appreciate it
bos this cMera can on saga iswara
Boleh je pasang kalau kereta you ada android player.
Hi bro, semua jenis android player boleh install 360 camera ke?
Janji ada video IN, boleh install.
@@TCsAnythingGoesboleh saya tahu apa maksud video in?
@@TCsAnythingGoessaya ada soalan pertanyaan yg ssma juga, can 360 install by any android player?
Hi mate..where to get Birdseye camera system. My car already installed with Android player. Please suggest me what items need to buy for getting Birdseye system. Thanks in advanced. Cheers!
the birdseye system should come as a set with everything needed in it.
Nice
I ndeed camera