How To Connect High Pressure Washer To A Garden Tap | Karcher Pressure Washer Install
HTML-код
- Опубликовано: 9 сен 2024
- Sometimes we tend to forget the connectors of attaching a pressure washer to the garden tap, well this is to remind myself and you on how to.
SMASH THAT LIKE BUTTON + SHARE & SUBSCRIBE
WEBSITE (STILL IN PROGRESS) www.zrkreviews.com
FACEBOOK - / zrkreviews
TWITTER - / zrkreviews
INSTAGRAM - zrkreviews
CONTACT US - contactus@zrkreviews.com
Thanks
@@tonysealy1698 thank you 😊
Other than getting the hose connector turned around (watch out for that one), the machine is simple to put together and use ruclips.net/user/postUgkxfQauTxLT0JLSvqkq10rD79TU4k0Vz8zP . And very nice, too. I'm surprised at the power-it's more than we'll ever need, and we've not even used the most powerful setting yet.I've cleaned off a dirty concrete porch to get it ready for sealing, started to clean siding, and I know this pressure washer will be terrific for cleaning tools this fall.The only issue we had is we had turned around the hose connector, and it leaked. Once it was on correctly, though, we had no problems with the connection. Just remember that the end with the green knob goes towards the hose. It's obvious now what we did wrong, but not necessarily obvious at the time.
Thank you. Youve saved me from buying an expensive hoselock i can just buy a hose and seperate connectors. Thanks a lot for making this
'Both connectors have a stop feature, so make sure you are getting the right connector'. You should explain what the 'right connector' is and what both of these connector types are and why it's important. Connecting an 'aquastop' type connector will damage your pressure washer. Only use the 'aquastop' type of connector to a garden hose end attachment. You need a straight through hose connector on both ends for a pressure washer. You also need to run the pressure washer with the power OFF and the water supply connected first to remove any air locks which can also damage your pressure washer.
Thanks very much for the advice. I was a bit confused. I’m new to both garden hoses and power washers. Very helpful! 😊👍
thank you for this- good instructions, calm and with no life story or aside information :)
thank you - excellent video; the vital matter of connection between machine and hose is a step other videos overlook.
Thank you very much. I was going absolutely crazy. I purchased my K2 from B&Q last Saturday. The manual that came with it is pathetic. Much appreciated your video. Regards.
At last - a video that tells me what I need to know...
A lot more helpful than the pitiful manual it came with.
That manual is an absolute joke, I only bought one of those silly adaptors thinking I only needed one, turns out I need two and not even one came with the god damn thing?! What the hell were they thinking
@@SassyOnline yep worst manual ever
Very good and straight foreward video
Thank you. The "now attach to pressure washer connector " - that is my problem. My machine does not seem to have a way to fit it on. It was useful however to see that i need to buy an additional connector.
Thank you so much! That’s the exactly the video I was looking for.
Official advice is to run the water through the system before turning the pressure washer motor on
Thanks for the useful, easy to follow tutorial. Peace to you too, bro.👍
Thanks I got stuck on this last bit!! Then I found your post.
No men in my house, and the hose kept flying off the tap! Thank you for explaining 😊
Same here have not used for ages as got soaked and about to research Handywomen as so fed up of mansplaining lol when I have asked.
Same, only mine flew out of the pressure washer itself while tap is open. I guess this solves it.
I’m wondering if I need to warm the pipe first. I have karcher pipe and K2 but both ends of the hose is leaking like crazy. What’s the solution please?
Simple yet effective video thank you
You are a life saver thank you :)
Excellent video, very well made. I've seen many videos regarding this, your is clearly the best. Thanks very much. Very helpful.
lol u just saved me going mental- tks..
10/10 best video.
Love the video and those connectors are exactly what I need but you never said the situation name of them
What do I search for pls?
Thank you for this
God forgive me but it's so refreshing reading the posts others have left about hose pipes bursting off the tap / problems with hose connectors. I bought a karcher years ago and effectively couldn't use it because of all the problems. My outdoor tap originally came with a brass hose connector. I was advised to take it off and use the plastic one that came with my garden hose. Now I can't get the plastic one off and the (stronger) brass one is sitting in the kitchen doing nothing. Why can't everything be universal? Thre are too many compatibility problems. I give up!
Thank you so much for that 🙏
You’re welcome 😊
Brilliant! Thank you 🙏
Tks ,,sorted now .
do those connectors that youve shown on video come in the box when you purchase one of those karches pressure washers ?
Thanks. Very helpful.
I have done everything right I have a karcher hose connector but it is still leaking?
Great video, thanks man 🙏🏼
My pleasure!
Thanks
A trick I do is to tie a cable tie over the trigger and control the key washer by the power button on the unit. I find my hands ache after 5 mins otherwise
thanks for the tip
You need to go gym mate
There should be a lock button on the trigger. Cable ties could be dangerous in an emergency
Whenever I turn my jetwash on and my hose pipe on my hose pipe always bursts out? What do I need
thank you
Thankyou for this very helpful
Hi, can the power chord come into contact with water without causing electrocution?
Do you need am aquastop connector at the tap or not
FYI Karcher recommend NOT to use aqua-stop connectors !
Turn on the water source…
Do not turn on the pressure washer immediately…
Check for a constant flow of water out of the gun, provided the gun trigger is pressed to on mode…
Constant outgoing flow means all air is out…
Now turn on the pressure washer.
Do you get just a standard garden hose? Any particular size ?
Porque a mi se me salta el tubo del conector por la parte conectada de la karcher
How do i attach the hose end with yellow nozzle to garden tap..i have brass or plastic attachment to the tap...just pushing isnt enough
I have a question. I have a karcher k5, I plug it in a bathroom faucet, but, the pressure is too high from the faucet and my hose gets disconnected either from a karcher plugin or the bathroom one so it makes a mess every time I try to use it. What do u think I should do?
I noticed using a normal hose is useless on power washers, you need to buy a thick NTS Pipe, this stops the pipe from squeezing and putting strain on the motor.
thnx for advice
✌️ piece bro
I do this but at the attachment of the pressure washer the water hose clogs up and hose gets bigger, water won’t go in the machine
Where to get the bit that attached to the water supply ? As well as the green thing to go onto it ? Dose the yello hose adapter come with the machine when you buy it ? Thank you so much
If they dnt supply check in any diy shop they will have it, do check my other video on unboxing of karcher pressure washer
Boujour existe t-il les robinet de cuisine et salle de bain et extérieur de la maison 🏠 connecté avec téléphone portable pour pouvoir fermer ou ouvrir l'eau ? Merci ++
mine was still leaking from the tap area :(
Will it work with hozelock?
What about pipes that have no thead? Do you have a video on that sir?
you will need a connector without the thread.
From where the high pressure will be available ?
do u need to use the stop connectors I have 2 free flow ones and mine is connected to my kitchen tap with a hozelock connector and when I take my hand off the trigger it blows the connector off the tap
I have the exact same problem and have been searching for answers but not found any. Did you manage to resolve this?
My suction hose keeps blowing up due to back pressure.
can I do the same with the tape from kitchen ? or it must be garden tap ? Thanks
get a universal kitchen tap to hose pipe connector cost few pounds online or local builder shop
What is the point of some hose connectors having a stop feature 🤦♀️ I can’t use it because the water isn’t coming through the hose
What’s the name of the connector at 1:35? I need that to connect my pipe to the pressure washer but I’m clueless about this stuff
the black one is a thread connector, the other is s standard hose pipe connector, u can show to any diy shop they will guide u
Just got a k5 145 bar and I used it for the first time and I use it for about 5 seconds then I get no pressure? Any help please
make sure hosepipe is not tangled n all connections are fitted correctly
@@ZRKREVIEWS yep all fine, just took it back got a refund 👍🏼
Hey I've only got 1 force stop connecter, but the place I bought the outside tap from said it has a value check in it. So will I be able to put just the one on the karcher side. Thanx
if u have a thread on the tap then u need the connector like shown in video, if u want you can use ur kitchen tap just purchase a universal tap to hose pipe connector
my gun is not coming with pressure, any helps?
make sure it all switched off first and unclog the gin then the hose
Karcher 2021
Karcher worst company they make many models dont includes hose or connectors and retail stores have no clue how to connect it