Our laboratory works with diodes, Transistors, sensors. and their parameters. This year I started modeling diodes, transistors, and sensors in Tcad sentaurus.
The reason you cannot see your structure in SDE is because of "Xlib: extension "MIT-SHM" missing on display "localhost:10.0"." error. You would be able to see it from the terminal. The way to fix it is to add the line "export XLIB_NO_SHM=1" to your ~/.bashrc file
My question is not related to this video; however, I would like to know, which equations are used to calculate static and dynamic power of multi state inverters?
Hey, thanks for your video, for our lab in italy we are making a FDSOI mosfet. We have a "technical problem". In practice our device works if we put our gate contact like you, but, if we deposite on the gate a layer of aluminum and use it as a contact the device stops work properly (we have a metal gate). There is a reason why you put the contact in the polysilicon instead of on top of it? If you answer to this you wil be my new sensei.
Hi maybe your device is not properly isolated by gate oxide, aluminum has metal contact and has infinite recombination velocity so polysilicon contact is working but metal is not working, rest I can say it after a piece of detailed information from you.
Hi, yes, you can simulated breakdown voltage using IV simulation and include impact ionization model to check that. The key is you fix a minimum current level so after simulation check at what voltage the current is suddenly shooting up. Please ask me if you have further doubts. please refer this paper it may help you to understand : ieeexplore.ieee.org/abstract/document/8856264
Hi, thanks for the good tutorial. Is it possible to define substrate orientation to simulate orientation-dependent mobility in TCAD Sentaurus SDE or Sdevice?
Good morning Mr.Soumya Ranjan Panda. I am Abdullayev Jo`shqin.I am from Uzbekistan. I watched Your video about TCAD SENTAURUS. I have any questions for you. Can I get you answered From you?
Can we do simulations for over current and short circuit protection scheme of GaN (gallium nitride) on TCAD? waiting for your swift and kind response.thanks
Hi Akshay, Thanks. You can download the synopsys tcad from the official website solvnet.synopsys.com/ if you have valid license and so site ID. And these tools are based on linux os.
Sir please guide me how can i learn sentaurus TCAD because no tutorial is available on internet. My college does have but No one knows how to use it. Any suggestion for me???
Our laboratory works with diodes, Transistors, sensors. and their parameters. This year I started modeling diodes, transistors, and sensors in Tcad sentaurus.
Good to know, keep us updating
The reason you cannot see your structure in SDE is because of "Xlib: extension "MIT-SHM" missing on display "localhost:10.0"." error. You would be able to see it from the terminal.
The way to fix it is to add the line "export XLIB_NO_SHM=1" to your ~/.bashrc file
Thanks
Thank you so much for ur help sir
My question is not related to this video; however, I would like to know, which equations are used to calculate static and dynamic power of multi state inverters?
Hey, thanks for your video, for our lab in italy we are making a FDSOI mosfet. We have a "technical problem". In practice our device works if we put our gate contact like you, but, if we deposite on the gate a layer of aluminum and use it as a contact the device stops work properly (we have a metal gate). There is a reason why you put the contact in the polysilicon instead of on top of it? If you answer to this you wil be my new sensei.
Hi maybe your device is not properly isolated by gate oxide, aluminum has metal contact and has infinite recombination velocity so polysilicon contact is working but metal is not working, rest I can say it after a piece of detailed information from you.
very nice video
Thanks Shivendra!
Thanks for video.Plz tell me how to save and load in work bench.
Its presented in the video, can you please elaborate your doubt ?
Thank you for replying me my mail id is dibyadrastasomu@gmail.com.Tell me ur email address.
Hi Dibyadrasta,
You can contact us teamvlsi2014@gmail.com
Can you please make a video on finfet simulation too
Hi we will try. Thanks
great video...can you tell me how to plot the breakdown characterisitcs?? Can we see the breakdown of device by plotting IV??
Hi, yes, you can simulated breakdown voltage using IV simulation and include impact ionization model to check that. The key is you fix a minimum current level so after simulation check at what voltage the current is suddenly shooting up. Please ask me if you have further doubts. please refer this paper it may help you to understand : ieeexplore.ieee.org/abstract/document/8856264
Dear Sir, Can you please say how to check how my device works at varying time instants with SVisual
Hi, thanks for the good tutorial. Is it possible to define substrate orientation to simulate orientation-dependent mobility in TCAD Sentaurus SDE or Sdevice?
@soumya, Could you please check it?
Could you please provide the installation process of TCAD synopsys sentaurus in Centos 7?
Good morning Mr.Soumya Ranjan Panda. I am Abdullayev Jo`shqin.I am from Uzbekistan. I watched Your video about TCAD SENTAURUS. I have any questions for you. Can I get you answered From you?
Hi
Sure.
pls let me know ur doubt.
Can you please do some basic simulation for solar cells
Hi you can find it in the example section in the lest column.
Sir, how to write a code in ,cmd file for SDEVICE tool. I want FINFET-related videos
Can you please inform me what is the folder name for MOSCAP C-V characteristics in workbench?
@soumya,
Please help.
Can i ask how to get the eda tools lincense and lab data for practicing?
Can we do simulations for over current and short circuit protection scheme of GaN (gallium nitride) on TCAD? waiting for your swift and kind response.thanks
Hi, yes I think you can do it, I have never done it but all device level simulation are possible.
Can you upload code on simulation of zno thin film transistor
I do not have the file 'sde_cvs.cmd', could you help me where I can find it ?
great work indded for beginers;;;;can you provide the link to download tcad on windows 10.
Hi Akshay,
Thanks.
You can download the synopsys tcad from the official website solvnet.synopsys.com/ if you have valid license and so site ID.
And these tools are based on linux os.
Sir from where can we get the commands of sde files and orthers
Could you please share the sdevice coding for ID vs Vg.
Can I get finfet
Sir please guide me how can i learn sentaurus TCAD because no tutorial is available on internet.
My college does have but No one knows how to use it.
Any suggestion for me???
Hi Subham,
I can understand the situation, pls drop us an email with exact issue. We will get back to you.
Any free software for Simulation of VLSI circuits
Hi, unfortunately most widely used one come with licence which is paid.
Sir I tried to join your Whatsapp group, but the group was full .Could please Open Telegram Group so that many People could join?
Hi Gunjan,
Yes, we are already there search "team vlsi" on Telegram, and join us. :☺️