Have a good day, Woody Big and deep gold 🤤 This is what is needed Is it possible to adjust the gpx series frequency from 33 to more than 45 ms. to reach large, deep gold? The microphone is well placed and the sound is clear and good luck woody
Im a gen y , and for some reason since i began in trade industry since 2004 atleast the quality of components has become delapitated to a point as an australian consumer our market legally has to give minimum 1 year warranty. Anything ive dealt with newage technology exposed to uv radiant heat goes to s..t. The bisphenol A in plastics must leach or etch a superficial residue over circuits to short out. New Nano technology they are coating a graphene film over circuits to seal somewhat. Whats everyones thought!
@NorjiLab-bw3tu Those caps are on the 5 volt supply rails near the MX7541 ADC , I have not got the values on my schematic but they look like 330uf size
@ low ESR electrolytic as long as it’s a 10 volt or higher and the the more uf the better, just get something that fits, and do not install the wrong way around.
@@DetectorMods Thanks for that . Will the polarity be marked on the bottom of the cap as I fear the white epoxy wont come off to see anything on the cap or board.
Woody, your audio sounded good to me. Thumbs up!
All good Woody.
Good stuff as usual.
You've got the same Plano cutters as me. I find them handy for cutting the SMT caps to remove them from cct boards.
Three legged regulator. 32:25
I'm wondering if the epoxy paint reduces the heat dissipative characteristics of the components and contributes to reduced lifespan.
Have a good day, Woody
Big and deep gold 🤤 This is what is needed
Is it possible to adjust the gpx series frequency from 33 to more than 45 ms. to reach large, deep gold?
The microphone is well placed and the sound is clear and good luck woody
There are limits on how far you can stretch out the pulses.
Im a gen y , and for some reason since i began in trade industry since 2004 atleast the quality of components has become delapitated to a point as an australian consumer our market legally has to give minimum 1 year warranty. Anything ive dealt with newage technology exposed to uv radiant heat goes to s..t. The bisphenol A in plastics must leach or etch a superficial residue over circuits to short out. New Nano technology they are coating a graphene film over circuits to seal somewhat. Whats everyones thought!
100%
I will let you know if it finds any big deep gold next season. I now know what to look at if it stops in the field . Thx
What is the yellow stained cap ratings, I will see if I can get one and replace it. I plan on carring a soldering iron and some hook up wire
@NorjiLab-bw3tu Those caps are on the 5 volt supply rails near the MX7541 ADC , I have not got the values on my schematic but they look like 330uf size
@@DetectorMods What type and voltage would suit ?
@ low ESR electrolytic as long as it’s a 10 volt or higher and the the more uf the better, just get something that fits, and do not install the wrong way around.
@@DetectorMods Thanks for that . Will the polarity be marked on the bottom of the cap as I fear the white epoxy wont come off to see anything on the cap or board.
older is better