Hello friend, helpful video thanks and congrats, there is something which i want to correct in your procedure, as a electronic engineer, my advice is to never use scratching paper on golden plated contacts, you will resolve the problem for short term, for long term you are damaging the pads beyond repair, the gold protects the pads from oxidation and is a few microns thick any scratch on them will expose the cooper and the oxidation process is unstoppable form that point, please use isotropic alcohol to clean the pads, is an non invasive cleaning, and is doing the job as well, please add a comment in your video, so the viewers won't damage the board and contact pads Thanks. and best regards from Romania
Agree wholeheartedly. Scotchbrite pad is way too aggressive for the flashed gold plating, but if the tarnish will not move with IPA, try an ink eraser. That will provide some very very fine abrasion without damaging the plating.
Helpful video, a bit long winded but appreciated 😉 I used toothpicks where you used your little metal strips to separate the base plate and I used contact cleaner and cotton buds to clean the components, but the main thing is you identified the problem and my window works perfectly again so thanks.
Brilliant video! I have just sorted out the windows on our Peugeot 307 by dismantling the drivers side switch and cleaning the contacts with switch cleaning spray and a cloth. Thank you👍
A ja napiszę po polsku, no i co nowy panel prawie w drodze zamówiony ale znalazłem czas na zrobienie tego i działa, nie dziwota jak "sttyk" był cały uwalony jakąś mazią... jesteś gość polak potrafi, thank you!!!!!!!!
Bravo,faci niste tutoriale interesante si educative ,ne scuteste de service si economisim bani ,am un peugeot exact ca al tău si te urmaresc din România 🤗
Hi. I've got peugeot 307 without SW version, in case of windows controller i got only front windows controlled on my panel, but your video helped me greatly, thank you so much.
I cleaned a few days ago mine, half was not working unless pressed really hard and yes, those small pins are pain in the ass to "open"! Nice video! we have almost identical cars except mine is leather interior.
Hi. It work in my case, the same problem with button for right window. Be very carefull when you have to lift/remove the first button because i broke a part from inside. This button is the one which close/open left+right rear mirrors.
Wow! Very useful video!! I've a request: Can you make a little video of how the take off the A/C exit that's inside the cabine (above the CD player) please 🙏 Thanks!
Cleaning the contacts work perfectly. Although in my case I ended up buying a new unit. About 15€ on Ebay! My 307 was an ex company car. Which means that everybody beaten it up and nobody cared for it. Lacking a lot of TLC! For only God knows what reason! The unit was totally scratched and not even screwed in place! The holding screw is missing also! Either case a shiny brand new unit looks way better than the wrecked unit. For 15€ I surely can't complain. ;-)
My passenger window is the same as the video however my rear electric windows don't work at all (from front panel or rear panels) any idea how I could fix it?
Yes. that's correct. For most modern cars, namely this Peugeot 307. Get a torx T20 and T30, in screwdriver form. It will be the best addition to your tool box! ;-) Those dreaded L shape torx sets are cheap, but a nightmare if you really need something done.
Thanks! Very good video.. without any edditing so I can see what can happen if you remove the button haha... btw, my Windows go up very slow.. any idea how that is possible?
I had my dissisembeld and clean it it just made problem worse you should first check wires that are in door joint most of the time problem is there and you will just do more damage dissisembeling the switch unit wich is basicly what i did i clean it with contact cleaner
Use a ratchet screwdriver as it’s quicker to get screws out. Don’t use power tools as they’ll destroy the screw. Don’t use a flat head screwdriver to remove the switch as you’ll damage the panel or switch, use strong nylon tools.
Nooooooo don’t use screwdrivers to remove panels and plastic interior, you’ll damage or break it. Use decent nylon tools, they cause no damage Prior to touching circuit board, make sure to don’t create static or de static yourself. Touch a metal object that isn’t linked to electrics and don’t wear anything like fleece clothing. Otherwise you’ll toast the board I replaced my whole until with an eBay one £12.99, 20 secs to replace. Job done
Авто/Мото
Hello friend, helpful video thanks and congrats, there is something which i want to correct in your procedure, as a electronic engineer, my advice is to never use scratching paper on golden plated contacts, you will resolve the problem for short term, for long term you are damaging the pads beyond repair, the gold protects the pads from oxidation and is a few microns thick any scratch on them will expose the cooper and the oxidation process is unstoppable form that point, please use isotropic alcohol to clean the pads, is an non invasive cleaning, and is doing the job as well, please add a comment in your video, so the viewers won't damage the board and contact pads
Thanks. and best regards from Romania
Agree wholeheartedly. Scotchbrite pad is way too aggressive for the flashed gold plating, but if the tarnish will not move with IPA, try an ink eraser. That will provide some very very fine abrasion without damaging the plating.
Did this on my 307 with only front electric windows, now work perfectly, thanks a lot!
this solved about 90% of my window troubles. thank you so much!!😁
Worked like a charm. This is why internet should exist. Cheers.
Helpful video, a bit long winded but appreciated 😉
I used toothpicks where you used your little metal strips to separate the base plate and I used contact cleaner and cotton buds to clean the components, but the main thing is you identified the problem and my window works perfectly again so thanks.
Brilliant video! I have just sorted out the windows on our Peugeot 307 by dismantling the drivers side switch and cleaning the contacts with switch cleaning spray and a cloth. Thank you👍
You don't know how thankfull I am... This helped me after not being able to close my window for an hour on the street... 😅
Amigo. Tu canal es una enciclopedia 307. Saludos y muchas gracias!!!
Thanks for this, I used it to fix my window panel and it worked!! The passenger window was the main problem and now it works like new.
Thanks for the video, it solved my problem.
As Mihai Salajan says, it is important to clean contacts with no-abrasive materials.
Thanks, fixed my car. Glad i saw this before looking for the root-cause elsewhere.
A ja napiszę po polsku, no i co nowy panel prawie w drodze zamówiony ale znalazłem czas na zrobienie tego i działa, nie dziwota jak "sttyk" był cały uwalony jakąś mazią... jesteś gość polak potrafi, thank you!!!!!!!!
Bravo,faci niste tutoriale interesante si educative ,ne scuteste de service si economisim bani ,am un peugeot exact ca al tău si te urmaresc din România 🤗
excellent that is exactly what was wrong with my 1.4hdi 2003 peugeot 307. well done cracking video easy to follow .
Many thanks for the detailed video. I'm going to try n fix my 2008 switch tomorrow.
Thanks a lot man this is what i needed and it works perfect now ! Cheers
Well done sir.
Did enough for me to close the window from a fully open position.
worked for my 2003 307 sw also i had exact same window problem thanks for this vid made my life way more eazy :)
Hi.
I've got peugeot 307 without SW version, in case of windows controller i got only front windows controlled on my panel, but your video helped me greatly, thank you so much.
Just what I needed 👍🏼
Worked a treat, thanks!
Just tried this - worked perfectly - thanks !
000p
Thanks a lot. It worked. Much obliged. You are great.
my dad had the same problem whit his car and this trick work nicely, good videa.
I just fixed mine!!! Thanks!!!
Hello my friend, thanks for this helpful Video. Greetings from Germany
I cleaned a few days ago mine, half was not working unless pressed really hard and yes, those small pins are pain in the ass to "open"! Nice video! we have almost identical cars except mine is leather interior.
Hi Никола,
Thanks a lot for good feedback! Great to hear it helped - stay awesome! ...and I bet it is cool with leather ;)
Cheers
Thanks that is very helpful .my window works now
Great to hear! Good job! :)
Hi Bro, Thxs a lot. very happy! I can fix my widow now. super. from Hoalland. :-)
Thanks it helped
Спасибо тебе добрый человек)))
Mister tnx for all your videos... can you record how to remove EGR valve from Peugeot 307 90hp and cleaning?
Dziękuję za video j. Jutro i ja naprawię
Brilliant! Thanks
Hi friend i do it .thanks thanks from french
Does the sliding switch for the mirrors left and right illuminate .all mine do but not the sliding switch
Thank you . I have the same issue.😊
Hi.
It work in my case, the same problem with button for right window.
Be very carefull when you have to lift/remove the first button because i broke a part from inside.
This button is the one which close/open left+right rear mirrors.
It worked well. I used paperclips.👍
next job to do, tanks.
Super
Bravo👍👍
Thanks Mate!
No problem Mate! Enjoy :)
Wow! Very useful video!!
I've a request: Can you make a little video of how the take off the A/C exit that's inside the cabine (above the CD player) please 🙏
Thanks!
Hi TFP,
You are very welcome! :)
Yes, of course. I will add this vid to the list.
Cheers!
Is It Fixed Yet ? Thanks you so much!
Waiting excited for the nexr video!
;)
thank you so much for the vedu
Thank You i did😊
Hello, I have taken off my button assembly exactly like you but my buttons are loose, any idea why? :(
Cleaning the contacts work perfectly. Although in my case I ended up buying a new unit. About 15€ on Ebay!
My 307 was an ex company car. Which means that everybody beaten it up and nobody cared for it. Lacking a lot of TLC! For only God knows what reason! The unit was totally scratched and not even screwed in place! The holding screw is missing also!
Either case a shiny brand new unit looks way better than the wrecked unit. For 15€ I surely can't complain. ;-)
Bravo thanks
Thabks bro
Tnx i fixed
great
Very well
Could you have used contact cleaner bit harsh with scotchbrite?
Or a pencil eraser
Hey there! Great videos! I have a question. How can I change the orange lights that are on the windows switch, for example in white?
Led smd changes
you need to rub the contacts not with sandpaper, but with a rubber eraser
u help me . thnx
You are welcome Bettahar! :)
My passenger window is the same as the video however my rear electric windows don't work at all (from front panel or rear panels) any idea how I could fix it?
Perhaps a fuse?
@@isitfixedyet891 That's exactly what it was, seemed too simple that I didn't bother to check, thank you
👍
For the screwdriver you said "torx T20"?
Yes. that's correct. For most modern cars, namely this Peugeot 307. Get a torx T20 and T30, in screwdriver form. It will be the best addition to your tool box! ;-)
Those dreaded L shape torx sets are cheap, but a nightmare if you really need something done.
Thanks! Very good video.. without any edditing so I can see what can happen if you remove the button haha... btw, my Windows go up very slow.. any idea how that is possible?
Hello...have you found the problem and a solution? I have the same problem with just one window
that was the wrong butten bro :'D
The camera was mirrored XD
Нормально)))
Нужно не наждачной бумагой тереть, а простой резинкой-стирачкой
А где вы живёте?
Its a good video , but U realy have no table with good light to show us all this process !?
I had my dissisembeld and clean it it just made problem worse you should first check wires that are in door joint most of the time problem is there and you will just do more damage dissisembeling the switch unit wich is basicly what i did i clean it with contact cleaner
Why don't you buy a new window control panel?
Use a ratchet screwdriver as it’s quicker to get screws out. Don’t use power tools as they’ll destroy the screw. Don’t use a flat head screwdriver to remove the switch as you’ll damage the panel or switch, use strong nylon tools.
Nooooooo don’t use screwdrivers to remove panels and plastic interior, you’ll damage or break it. Use decent nylon tools, they cause no damage
Prior to touching circuit board, make sure to don’t create static or de static yourself. Touch a metal object that isn’t linked to electrics and don’t wear anything like fleece clothing. Otherwise you’ll toast the board
I replaced my whole until with an eBay one £12.99, 20 secs to replace. Job done
That solution will only last for a few days, I don't know what the problem is but this resistance 4 wire design is the worse I have seen
Too bad it didn't work...