I'm going to make a video on my other channel of what happens when you incorrectly set failsafes. We'll dig some holes to China and fly to the feakin moon. It'll be fun guys.
R I P JC :/ for your viewers to come You CAN set failsafe to switch back to ANGLE mode before engaging failsafe so it as a chance to land if you fly alone in big space
@@milt1300 still some of the best info on RUclips!!!!! Life is short and this guy made a impact!!!! This flight is 4 you my friend!!! My you rest in peace!!!!!!!!! LEGEND
set your failsafe to custom then set it to go into just below hover throttle and then have it switch into angle mode and armed so when you DO hit failsafe it will level off and slowly come down.... surprised not more people do this, racing drone or not
You should be able to set up a custom fail safe and low hover like you explained with the throttle. But you should also be able to set your self level toggle switch to activate as well doing the same method as your throttle set. That way you get auto acro AND hover land on fail safe.
Can you not set angle mode to one of the AUX channel, and failsafe the AUX to angle mode, then land gradually. That sounds better than drop, especially if high above ground.
I was flying a bigger quad that I have in a park when I lost my signal for a split second. The failsafe kicked in and the quad shut down, followed shortly by a rapid unscheduled disassembly. Fortunately, I was able to rebuild the quad and it hadn't happened again since. I blame all the people living around the park I was flying at, blasting their 2.4 GHz WiFi out at full strength.
Thanks JC, Good Video. Your're really knocking them out... I've got two quads that I can't get failsafe to work (Drop). They both have the transmitter signal wire moved to URAT 1/2 Rx in order to get iBus on the Evolution. They both have the TGY-iA6C receiver. Have you had any issues? Thanks for all the hard work!!!!!!
I've got my TBS Disco at up with Naza 2 to RTH. What settings do I have the radio on to get rid of the start up fail safe screen? Love your vids, just found them recently.
Great video 🖒Idk why I but I thought failsafe was the thing that stopped the copter and kept it from flying away. Nice info, I'm definitely turning mine on no pulses so it just drops.
I thought this too: surely in "custom" mode you can set the mode channel to select self-level. If the flight controller has a barometer, I imagine in theory that could also be used with the gyro to land nicely.
hi i am using x4rsb with naza m lite and non of the fail safe is working when i shut down the tx the motor go full speed in any fail safe config u have any idea why its hepend?
I have my failsafe at 1000 .. I got a failsafe for the first time the other day .. I hit my switch to Horizon mode .. and as soon as Telemetry recovered .. I was already raising the throttle .. this was able to save my butt .. I don't know just another idea
3:54 It was my first day flying a freestyle fpv drone, then this happened to me. Somehow I was lucky because I was in horizon mode, but yes, I only recovered pieces of it. I had to watch it all happen. 😢
I'd say it's the best option for racing and freestyling where you are using Acro flight mode. And yep when you lose signal the motors will stop and it just drops. Sounds like it could break something but it's a better option than the motors staying on and it flipping to its death then digging a hole in the ground.
niiiiice video...sooo now all I get when I turn it on is the SD card warning.. how do I get rid of that...I have not set any voice to it yet..in still learning how to download it to the card.plus my internet tripping.lol
I'm going to make a video on my other channel of what happens when you incorrectly set failsafes. We'll dig some holes to China and fly to the feakin moon. It'll be fun guys.
R.I.P. , even now your videos are helping
As much as ever...
R I P JC :/
for your viewers to come
You CAN set failsafe to switch back to ANGLE mode before engaging failsafe so it as a chance to land if you fly alone in big space
@@milt1300 still some of the best info on RUclips!!!!! Life is short and this guy made a impact!!!! This flight is 4 you my friend!!! My you rest in peace!!!!!!!!!
LEGEND
Anyone know what the other channel was?
Still helping people to this day!!!! What a great channel!!!!!!!
👍😀👍
Still watching your vids bro. Rip love ya
RIP Bro, thanks for the help from beyond
Did he die
Some pf my friend say, he is retired, but now i know if you is not anymore there... RIP broo.. ur videos helps so much ..
I've learned so much from this guy its insane that it's 3 year old content. By far one of the most helpful channels I've come across for FPV. RIP man.
Wym rip? Cuz he's not posting anymore?
@@macfpv03 he died a few years back in a motorcycle accident
@@RYVENANT oh shoot well thanks now i know
set your failsafe to custom then set it to go into just below hover throttle and then have it switch into angle mode and armed so when you DO hit failsafe it will level off and slowly come down.... surprised not more people do this, racing drone or not
yea thats what i was saying watch this. You can even see the tabs for his acro/horizon switch to engage i the fail safe menu.
How do you set it to switch into angle mode on failsafe?
@@BlasterDavo Did you find out how to do that? :D
Spaceship Journey No but the more I've looked into it and seen other people flying, the more I think Brick mode is a way better option.
Still come across your vids today when I search things I need help on. RIP bro. Only been in FPV for a month now 🕊 🕊
You should be able to set up a custom fail safe and low hover like you explained with the throttle. But you should also be able to set your self level toggle switch to activate as well doing the same method as your throttle set. That way you get auto acro AND hover land on fail safe.
You say dig a hole to China but in actuality if it lands upside down and the motors can't turn they burn up correct?
Can you not set angle mode to one of the AUX channel, and failsafe the AUX to angle mode, then land gradually. That sounds better than drop, especially if high above ground.
I was flying a bigger quad that I have in a park when I lost my signal for a split second. The failsafe kicked in and the quad shut down, followed shortly by a rapid unscheduled disassembly. Fortunately, I was able to rebuild the quad and it hadn't happened again since. I blame all the people living around the park I was flying at, blasting their 2.4 GHz WiFi out at full strength.
Thanks JC, Good Video. Your're really knocking them out... I've got two quads that I can't get failsafe to work (Drop). They both have the transmitter signal wire moved to URAT 1/2 Rx in order to get iBus on the Evolution. They both have the TGY-iA6C receiver. Have you had any issues? Thanks for all the hard work!!!!!!
I haven't had any issues. Not sure whats going on.
I've got my TBS Disco at up with Naza 2 to RTH. What settings do I have the radio on to get rid of the start up fail safe screen? Love your vids, just found them recently.
Great video 🖒Idk why I but I thought failsafe was the thing that stopped the copter and kept it from flying away.
Nice info, I'm definitely turning mine on no pulses so it just drops.
If I'm using with f550 flange wheel has a NAZA FC with GPS. Naza handles fail safe, so what do I set x7 failsafe to?
Were did I get the skin on the controller
Can't the failsafe change the flight mode to autolevel and then try to land/hover?
and also the "land" option could simply check the Z axis acceleration I guess.
I thought this too: surely in "custom" mode you can set the mode channel to select self-level. If the flight controller has a barometer, I imagine in theory that could also be used with the gyro to land nicely.
Hi! thx for the video. I can only bind the qx7 with the d4rII in D8, but to have the failsafe menu I have to be in D16... how can i do?
hi i am using x4rsb with naza m lite and non of the fail safe is working
when i shut down the tx the motor go full speed in any fail safe config
u have any idea why its hepend?
I have my failsafe at 1000 .. I got a failsafe for the first time the other day .. I hit my switch to Horizon mode .. and as soon as Telemetry recovered .. I was already raising the throttle .. this was able to save my butt .. I don't know just another idea
3:54 It was my first day flying a freestyle fpv drone, then this happened to me. Somehow I was lucky because I was in horizon mode, but yes, I only recovered pieces of it. I had to watch it all happen. 😢
So no pulse is the best option `? It will stop the motors and just drop like it is in betaflight chosen? :)
I'd say it's the best option for racing and freestyling where you are using Acro flight mode. And yep when you lose signal the motors will stop and it just drops. Sounds like it could break something but it's a better option than the motors staying on and it flipping to its death then digging a hole in the ground.
Yes thank you ! :)
Btw do you have a 450 framed drone ? I am looking for motors for a 1,4 kg quad.
niiiiice video...sooo now all I get when I turn it on is the SD card warning.. how do I get rid of that...I have not set any voice to it yet..in still learning how to download it to the card.plus my internet tripping.lol
you didnt finish explaing how to set it. lol i fly freestyle and i want a failsafe lol
it's my birthday and i want a squirrel but not just any old squirrel i want a trained squirrel
hehe this is the best channel for anything to do with qx7. and its damn funny u keep saying "digs its self to china" hehehe
Thanks again. #godspeed
You are trully missed JC
RIP JC
1st