Safely seal up your Starbucks Cold Cups with CrystaLac and give it that super shiny and durable finish! Learn more about CrystaLac: ruclips.net/video/BfheX8XCTME/видео.html Learn how to make the decal yourself: ruclips.net/video/2sKAD2mfKxo/видео.html
My heart skipped a beat when I saw there was a new video!!!! Thank you for sharing. I just made one of these myself. As always thank you for sharing!!!
This video I found answered my questions I asked you a few days ago!!! After I saw you answered them! I can’t tell you enough how grateful I am for your videos!!!
Hi you said add decal first , but video shows it added at the end after glitter application. Would like to try this but not sure which step needs to be done first. TIA
I added the decal second... Because I changed my mind... It's not wrong to do it that way but it just takes longer. Because I had to do even more layers on top of the vinyl. If you lay the decal first you'll use less layers and be done faster 😉
@@Love_Lexx I do! You can add it after a few coats of BT though. Doesn't really matter just that it takes less layers to cover the whole cup if you put it on first!
Thanks for the video. I've wanted to start making my own tumblers but, definately want to use something that isn't epoxy/resin. Only thing is I'm in Canada and it looks like I can't get this product. Is there an alternative that I might be able to use?
Hi Alison! I want to make a peekaboo glitter dipped wine glass where a mirrored vinyl decal is applied first, then glitter over the vinyl so you only see the vinyl image from the inside of the glass.....my question is: not one tutorial I've seen thus far discusses or shows sanding their glass as part of their prep. I know I have to sand the glass, but I'm afraid if I sand it before adding the vinyl it will dull the way it appears from the inside of the glass, so....should I sand the glass, then add a thin layer of BT or EP before I add the vinyl, then seal with glitter glue and continue on w/glitter layers....OR should I apply the vinyl first to the unsanded glass, then sand the glass around the vinyl, then do my layers of glitter glue, glitter and BT? I apologize for the long question and hope I am making sense!🤦♀️ Thanks so much for your help! Your tutorials have been my saving grace in my learning process❤
I asked in another video but I can't find my question so I can't even see if you've answered it. I want to seal this summer's Starbucks cups, the ones that have glitter that changes colors. If I use Brite Tone to seal it will I ruin the color changing properties?
Hello, i just started following you and i love all of your tutorials!! I recently bought the crystalac tumbler bundle and i was wondering if the glitter glue would be okay to apply the glitter and seal the glitter ? Does it dry white or clear? Thank you!!
I’ve been reading about dealing these types of cups a d how flexible they are. Have you ever had a problem with the Crystalac cracking with the flexibility of the cups?
That was my question as well. I know you can do double wall acrylic cups but I didn’t think these flexible single wall cups were recommended- especially because they would get condensation if used with cold items
I have this question as well, I'm looking for an alternate as I tried using epoxy on these cups but found it to have air pockets in-between the cup and epoxy after some time.
Hello! Thank you for this! I have been weary of using epoxy but totally love this idea better. I do have a question, can you seal regular acrylic mugs the same way??
I want to try sealing mine like that, but is it absolutely necessary to have that cup turning machine. I’m not looking to make a bunch of cups, just for myself and possibly as gifts here and there, so I don’t want to invest in a machine. (My husband already gives me flack for my cricut that he says I “hardly use” 🙄)
Great video! I am curious will crystalac be ok to use on bottom of a glitter globe acrylic cup? I have been searching on other ways to seal the bottom hole without using epoxy. I did use loctite silicon to plug the hole but I can cover it with super glue after sanding then add crystalac, would that work?
I know you saw my other video but commenting in case others have this same question! Here is how I seal the snow globe tumblers: ruclips.net/video/9XkxkNOVkEQ/видео.html&lc=Ugz64PXuviN3iW9R1XF4AaABAg
I downloaded the Starbucks logo from your site. What size should they be set at to be perfect for the cup. After I uploaded it to my design space it made the logo larger. Thank you!
This may be a totally obvious question... but can I use any type of plastic squeeze bottle? Just make sure it has a cap? Does it pour easlily into the the bottle? Just trying to gather my supplies so I can jump right in :) Also, just making sure, but does it easily wipe off your fingers after you apply the coats? Thanks so much!!!
Glad you're here! If there is "holes' it's probably from bubbles and you putting on your coats too thick. let it dry out a day and then sand it down. Make sure you're doing super thin coats!
Love this video. Thank you. I do have a question. Since these cups sweat, is that going to be a problem with BT? Should we wait a few weeks before using them?
Hi! I recently tried using crystalac for the first time and after it had split I guess you would say? I lightly sanded it before but after there were little gaps in the crystalac. Anyone know how I can fix this?
Thank you so much for posting this videos. Question I’m trying to do the Starbucks cup with either waterslide paper or printable vinyl no glitter, now to prep the cup do I need to sad the cup before or at all and do I just use the brite tone or do I need other things. Thank you in advance
No fumes! Its completely non toxic and has no hazardous ingredients. And since it's water based, it cures by evaporation so there are no fumes created/let off during curing! The time it takes really depends on how much time you have to give. You can layer your Brite Tone every 4 hours and your cup will probably need 6-8 layers or so (really depends on the design tbh) and so it can be two days or 5 days depending on your ability to get layers on!
I just got into making these custom starbucks cups but just ordered resin to start sealing them. But after seeing your videos I'm gonna be using crystalac instead!! So it is completely non-toxic, I wouldn't need gloves?
Newbie... Can you crystalac and then after the glitter and logo is applied, maybe add eproxy to help get it smoother quicker? Or should you not use the two?
I don't use epoxy because it's extremely toxic. And you can't put epoxy on top of Crystalac. I personally wouldn't use epoxy on single walled cups because it will chemically burn into the plastic and could damage the integrity of it
How did you apply your crystalac without moving the glitter?!?! When I did mine it shifted my glitter and gave me “bald spots” lol I used a really light touch too!!
Do you have a suggestion for a spinner? My daughter and I are starting to make cups and love the idea of sealing them and of course making glitter ones. Is it better to invest in a double one?
It really depends, i have a single turner i purchased on amazon that i really like, but i also have a double that i built myself. Both are good and if you're making a lot of cups, having a double is obviously helpful! This is the cup turner i bought: amzn.to/31Hm2xd . doing a DIY is cheaper if you have the right tools and time for sure.
Thank you so much for the video..very informative! Can this exact technique be created using the double wall skinny acrylic tumblers without turning the tumbler matte looking like the starbucks cups and without streaks? I hope I asked the question correctly😳. Thanks so much🙂
@@AlisonCrafts Thank you so much for responding. I've been searching so long for a product that doesn't make the crystal clear acrylic tumblers turn matte looking and I think I found it. I know that matte look is in due to the starbucks cups, but I like the crystal clear look. Just a personal preference. Thank you so much for your help..Enjoy the rest of your weekend!
@@gabxbellla9898 Hi..I was told if your acrylic tumbler is double and NOT single wall, you could use epoxy on it so that's what I ended up using. I used what I already had, but I still plan on buying Crystalac and trying it out.
If I'm using a clear plastic cup (not starbucks which is more whitish than see through/clear), do I need to sand it down first? Will the scratches be visible?
It may peel off if you don't sand but you could test it out. there is a chance it will be fine. Not sure you can really remove it from these types of cups without ruining the cup.
Hello! Thanks for your video. I’ve been watching tutorials for Brite Tone and some talk about a curing time. With polyurethane and mod podge they say it can take 28 days to cure. Do you know how long Brite Tone takes? If you sell a custom cup I’m assuming you don’t wait until the cup is completely cured to sell it. If you don’t what are the instructions you give to your customers?
It can take up to 30 days to fully cure but it is safe to use after about 5 days! Just be gentle with it before that 30 day mark! The instructions are to handle with care, no soaking, no microwave, no dishwashwer, and it can break if dropped!
@@AlisonCrafts what if its really hot out , would i be able to apply another coat once I see it's dry? Right now where I live it's in the 100° that's why I'm asking everything seem to melt alot faster and dry quicker
Love this video!! I making a cup right now, its in the drying process about 2 hours in and I just noticed some hair :( any possible way I can get it out?
Question: you mention putting the decal on prior to putting on the glitter, however you put it on after you already had the glitter on. So, do you recommend starting the way you do, re-sanding, & then place the vinyl on & then continue to put on more Crystalac? Just trying to clarify | ☺️
Thank you so much for posting this! One question... when you sand do you sand the Starbucks logo itself? I've lightly sanded with two different 400 grit sandpapers and they both scratch it to the point that it's noticeable. I didn't really see you sand the logo itself here, but will the brite tone still adhere without sanding that part?
I bling cups and was wondering if I can put just one layer of crystalac on the cup just as a sealant or would i have to do more than one layer? Thanks!
Hi!! I used britetone, I did about 4 layers and curated how it was instructed but then it started to peel, few days later. Do you know what causes britetone to peel?
@@AlisonCrafts Thank you! I'm new to working with vinyl and Starbucks cold cups. Not really sure I have the patience for glitter lol Do you by chance have any videos on layering vinyl?
i looked into their website and it mentions to use ventilation and to use a mask as well. it also mentions that VOC is present, this was on the Extreme Protection. are they all like that? i want to be safe and use an alternative to resin, and possibly this if they’re all the same
It's exponentially safer than resin, it cures by evaporation so no fumes during the curing process. Vocs are in everything, including household cleaning supplies or your bedding. This has less than household cleaners. You should wear a mask if you're spraying the product but I never do that so I don't wear a mask. Here is some more info:ruclips.net/video/xjpPFivCpKU/видео.html
@@AlisonCrafts yes I know they’re in everyday items. I have been watching your videos using this product but reading that on their website I just wanted to make sure that this product didn’t come close to resin since it is really unsafe.
I have a question. Would this also work on the color changing cups? I have a cup that I’m doing for work & I applied the vinyl & I don’t want the vinyl to come off when they wash it. Would the CrystaLac work to seal it down? Thanks
That's all you need! Here is my link: thecrystalacstore.com/collections/clear-top-coats/products/brite-tone-instrument-finish?sca_ref=301559.RjXXsfrXmN If you're going to dive into tumblers they have a ton of other products you can get too!
I didn’t seal the bottom of my cup and it was sitting in condensation and it started to peel on the bottom, is that because I didn’t seal on the bottom? or could there be another reason?
@@AlisonCrafts oh okay, and when you said you didn’t seal this cup, if you were to seal it what would you use? E6000 spray? Then let it sit for a few hours then apply bright tone?
What is the durability on a plastic cup like this with crystalac? Id be afraid it was crack off if the cup was squeezed or something. Or can it not be squeezed once the cup is finished because it’s hard?
I've been using mine for months and it's in great condition. the cups themselves are pretty rigid and take some effort to squeeze so i really don't worry about that. You'd probably break the cup by squeezing it without the crystalac. if anything, it's probably more durable with it on there
Alison Crafts Hi. I did this with the Manna color changing cups and it peeled and cracked when I squeezed the cup to snap the lid on. Those lids don’t snap on easily. Any suggestions as to what I can use on those to add glitter?
Hello this is probably a dumb question but do you get your cups from starbucks? Also where did you get the spinning machine that keeps turning your cup? Is crystalac toxic?
@@AlisonCrafts thank you so much! I also have glitter glue, can I use that on Starbucks cups as well? If so, what would be the order? I super appreciate you commenting back. I am so grateful❤️
Safely seal up your Starbucks Cold Cups with CrystaLac and give it that super shiny and durable finish!
Learn more about CrystaLac: ruclips.net/video/BfheX8XCTME/видео.html
Learn how to make the decal yourself: ruclips.net/video/2sKAD2mfKxo/видео.html
How long does it take to cure and is it safer then epoxy
My heart skipped a beat when I saw there was a new video!!!! Thank you for sharing. I just made one of these myself. As always thank you for sharing!!!
Yay thanks for watching! You're so nice!
This video I found answered my questions I asked you a few days ago!!! After I saw you answered them! I can’t tell you enough how grateful I am for your videos!!!
Thank you
You made it look so easy. Thank you for the tutorial. Great job! I'm trying it tonight.
Hi Alison, I was wondering how would you seal a matte cup that has holographic vinyl?
Hi you said add decal first , but video shows it added at the end after glitter application. Would like to try this but not sure which step needs to be done first. TIA
I added the decal second... Because I changed my mind... It's not wrong to do it that way but it just takes longer. Because I had to do even more layers on top of the vinyl. If you lay the decal first you'll use less layers and be done faster 😉
Alison Crafts thank you! And love your videos. So helpful. I will hopefully be trying a tumbler soon. For now I’m just watching and learning.
Yay! You're welcome. Let me know if you have questions along the way!
Alison Crafts Hi Alison! Do you add your decal after you sand?
@@Love_Lexx I do! You can add it after a few coats of BT though. Doesn't really matter just that it takes less layers to cover the whole cup if you put it on first!
That's so pretty and I love the Crystal lac that you add to seal the cup. I may try this on a cup. Thank you so much for the video!!!
Can you do this with printable vinyl that’s laminated? Love the cup can’t wait to do one ! ❤
I’m assuming the same goes for the grand finale on cold cups? I’m new to the crystalac products and just wanted to be sure
Hi Alison! Video is great! A disposable hot cup can be seal the same way? Thanks in advance 😊
New here but love how straight to point you are ❤️❤️
Thanks for stopping by
do u think coating a lime plastic cold cup from starbucks would work even though i cant sand it?
Thanks for the video. I've wanted to start making my own tumblers but, definately want to use something that isn't epoxy/resin. Only thing is I'm in Canada and it looks like I can't get this product. Is there an alternative that I might be able to use?
Hi there! Is there a reason you apply your vinyl before the glitter? i’d be worried of getting glitter on the decal where i wouldn’t want it!
Can I use modge podge to cove/seal glitter vinyl on a plastic tumbler?
I know this is an old video but I would like to know if you can do this with grande finale?
Yes you can!
Can you use this method on the new matte acrylic tumbers?
How many layers do I need? For a cold cup? And will it crack? What grit for sanding?
Hi Alison! I want to make a peekaboo glitter dipped wine glass where a mirrored vinyl decal is applied first, then glitter over the vinyl so you only see the vinyl image from the inside of the glass.....my question is: not one tutorial I've seen thus far discusses or shows sanding their glass as part of their prep. I know I have to sand the glass, but I'm afraid if I sand it before adding the vinyl it will dull the way it appears from the inside of the glass, so....should I sand the glass, then add a thin layer of BT or EP before I add the vinyl, then seal with glitter glue and continue on w/glitter layers....OR should I apply the vinyl first to the unsanded glass, then sand the glass around the vinyl, then do my layers of glitter glue, glitter and BT? I apologize for the long question and hope I am making sense!🤦♀️ Thanks so much for your help! Your tutorials have been my saving grace in my learning process❤
I asked in another video but I can't find my question so I can't even see if you've answered it. I want to seal this summer's Starbucks cups, the ones that have glitter that changes colors. If I use Brite Tone to seal it will I ruin the color changing properties?
Thank u I will try * newbie * n it looks easy. I bought the cl.
Hello, i just started following you and i love all of your tutorials!!
I recently bought the crystalac tumbler bundle and i was wondering if the glitter glue would be okay to apply the glitter and seal the glitter ? Does it dry white or clear?
Thank you!!
yes - that's what it's made for! it will dry clear
Hello!! I have a question do you need to be in a well ventilated area?
Loved your work where can we buy cups?
How can you also do the lid?
I’ve been reading about dealing these types of cups a d how flexible they are. Have you ever had a problem with the Crystalac cracking with the flexibility of the cups?
That was my question as well. I know you can do double wall acrylic cups but I didn’t think these flexible single wall cups were recommended- especially because they would get condensation if used with cold items
I have this question as well, I'm looking for an alternate as I tried using epoxy on these cups but found it to have air pockets in-between the cup and epoxy after some time.
Hello! Thank you for this! I have been weary of using epoxy but totally love this idea better. I do have a question, can you seal regular acrylic mugs the same way??
Crystalac can be used on plastic, wood, glass, ceramic, and metal :)
I want to try sealing mine like that, but is it absolutely necessary to have that cup turning machine. I’m not looking to make a bunch of cups, just for myself and possibly as gifts here and there, so I don’t want to invest in a machine. (My husband already gives me flack for my cricut that he says I “hardly use” 🙄)
Hi Alison! How many ounces of brite tone would you say you use on each cup?🙈😅
Approximately how many coats for this tumblers
Can you tell me what the difference between polyurethane and bright tone ?
I see this is an older video; can the same be done with Crystalac Grande Finale
Yep!!
Would it be possible to just go over the vinyl? Or would it be patchy?
Where do you get the Starbucks cup
Great video! I am curious will crystalac be ok to use on bottom of a glitter globe acrylic cup? I have been searching on other ways to seal the bottom hole without using epoxy. I did use loctite silicon to plug the hole but I can cover it with super glue after sanding then add crystalac, would that work?
I know you saw my other video but commenting in case others have this same question! Here is how I seal the snow globe tumblers: ruclips.net/video/9XkxkNOVkEQ/видео.html&lc=Ugz64PXuviN3iW9R1XF4AaABAg
I downloaded the Starbucks logo from your site. What size should they be set at to be perfect for the cup. After I uploaded it to my design space it made the logo larger. Thank you!
I need this answer too!
I have seen where the liquid the are applying before glitter has a tint of color. Do you know what that might be?
Could be mica powder, pigments, paint!
Is it ok to mix any of those with Brite Tone?
This may be a totally obvious question... but can I use any type of plastic squeeze bottle? Just make sure it has a cap? Does it pour easlily into the the bottle? Just trying to gather my supplies so I can jump right in :) Also, just making sure, but does it easily wipe off your fingers after you apply the coats? Thanks so much!!!
Any will work as long as it's air tight! I recommend using a funnel when you pour! And it is super easy to clean up 😊
Is it just me but when I put britetone on the logo it starts to want to come off... is it because I do not lightly sand it before?
Just found your channel and love it just wondering how do you fix the cup if it looks like it has a bunch of holes or why it happened?
Glad you're here! If there is "holes' it's probably from bubbles and you putting on your coats too thick. let it dry out a day and then sand it down. Make sure you're doing super thin coats!
Love this video. Thank you. I do have a question. Since these cups sweat, is that going to be a problem with BT? Should we wait a few weeks before using them?
Definitely wait at least 5 days but after that you should be fine. Just make sure to prep well!
@@AlisonCrafts Thank you. I’ll definitely try it and use the cup before I make for any friends 😊
Hi! I recently tried using crystalac for the first time and after it had split I guess you would say? I lightly sanded it before but after there were little gaps in the crystalac. Anyone know how I can fix this?
Thank you so much for posting this videos. Question I’m trying to do the Starbucks cup with either waterslide paper or printable vinyl no glitter, now to prep the cup do I need to sad the cup before or at all and do I just use the brite tone or do I need other things. Thank you in advance
Please I need your help
Sand like i did in the video, do 3 coats of brite tone, add your decal, then add more coats of BT!
I love the idea of crystalac. But are there no fumes to worry about like epoxy and realistically how many days does it take to do one cup like this?
No fumes! Its completely non toxic and has no hazardous ingredients. And since it's water based, it cures by evaporation so there are no fumes created/let off during curing! The time it takes really depends on how much time you have to give. You can layer your Brite Tone every 4 hours and your cup will probably need 6-8 layers or so (really depends on the design tbh) and so it can be two days or 5 days depending on your ability to get layers on!
Hello this video is so helpful i just have a question when upgrading to the silouhette design plus or business is it a one time charge or recurring?
one time charge!
I just got into making these custom starbucks cups but just ordered resin to start sealing them. But after seeing your videos I'm gonna be using crystalac instead!! So it is completely non-toxic, I wouldn't need gloves?
Awesome! Non toxic and you don't need gloves!
Newbie...
Can you crystalac and then after the glitter and logo is applied, maybe add eproxy to help get it smoother quicker? Or should you not use the two?
I don't use epoxy because it's extremely toxic. And you can't put epoxy on top of Crystalac. I personally wouldn't use epoxy on single walled cups because it will chemically burn into the plastic and could damage the integrity of it
I asked this on the blanks, but you don’t do the e6000 step? Why not here but on a tumbler?
doing e6000 is completely optional. It can help flatten your glitter but mine was already super flat so i skipped it here!
How did you apply your crystalac without moving the glitter?!?! When I did mine it shifted my glitter and gave me “bald spots” lol I used a really light touch too!!
When I use this method I don't usually get much movement. You could seal it with E6000 spray!
Do you have a suggestion for a spinner? My daughter and I are starting to make cups and love the idea of sealing them and of course making glitter ones. Is it better to invest in a double one?
It really depends, i have a single turner i purchased on amazon that i really like, but i also have a double that i built myself. Both are good and if you're making a lot of cups, having a double is obviously helpful! This is the cup turner i bought: amzn.to/31Hm2xd . doing a DIY is cheaper if you have the right tools and time for sure.
@@AlisonCrafts Thank you so much!!!
Thank you so much for the video..very informative!
Can this exact technique be created using the double wall skinny acrylic tumblers without turning the tumbler matte looking like the starbucks cups and without streaks? I hope I asked the question correctly😳. Thanks so much🙂
You can use this on any type of tumbler. I would get the matte sheen to make it matte
@@AlisonCrafts Thank you so much for responding. I've been searching so long for a product that doesn't make the crystal clear acrylic tumblers turn matte looking and I think I found it. I know that matte look is in due to the starbucks cups, but I like the crystal clear look. Just a personal preference. Thank you so much for your help..Enjoy the rest of your weekend!
@@tonyahaynes115 do you mind letting me know which product
You found?? Thanks!
@@gabxbellla9898 Hi..I was told if your acrylic tumbler is double and NOT single wall, you could use epoxy on it so that's what I ended up using. I used what I already had, but I still plan on buying Crystalac and trying it out.
@@tonyahaynes115 thanks,
I ordered crystalac products to stay away from epoxy so hoping it works!
If I'm using a clear plastic cup (not starbucks which is more whitish than see through/clear), do I need to sand it down first? Will the scratches be visible?
Yeah sanding to prep is really important
I didn't sand . I saw another tutorial and it did not say to do that. Should I redo it and if so how do I take the bt off?
It may peel off if you don't sand but you could test it out. there is a chance it will be fine. Not sure you can really remove it from these types of cups without ruining the cup.
Hello! Thanks for your video. I’ve been watching tutorials for Brite Tone and some talk about a curing time. With polyurethane and mod podge they say it can take 28 days to cure. Do you know how long Brite Tone takes? If you sell a custom cup I’m assuming you don’t wait until the cup is completely cured to sell it. If you don’t what are the instructions you give to your customers?
It can take up to 30 days to fully cure but it is safe to use after about 5 days! Just be gentle with it before that 30 day mark! The instructions are to handle with care, no soaking, no microwave, no dishwashwer, and it can break if dropped!
@@AlisonCrafts what if its really hot out , would i be able to apply another coat once I see it's dry? Right now where I live it's in the 100° that's why I'm asking everything seem to melt alot faster and dry quicker
@@AlisonCrafts can you put in dishwasher after 30 days?
Hi. After applying glitter shud u let dry before coating again? Also do you add decal after glitter and coat? Do u sand the decal too?
Yes, you need to let it dry 4 hours before moving on! I would sand the cup , add decal, and then add glitter.
Love this video!! I making a cup right now, its in the drying process about 2 hours in and I just noticed some hair :(
any possible way I can get it out?
ugh thats the worst! take some sharp tweezers and grab it :)
That happens to me all the time I hate it..it makes me want to give up
Question: you mention putting the decal on prior to putting on the glitter, however you put it on after you already had the glitter on. So, do you recommend starting the way you do, re-sanding, & then place the vinyl on & then continue to put on more Crystalac?
Just trying to clarify | ☺️
you can put it on first or once it's smooth. less layers over all if you put the decal on first.
@@AlisonCrafts Great, thanks.
Thank you so much for posting this! One question... when you sand do you sand the Starbucks logo itself? I've lightly sanded with two different 400 grit sandpapers and they both scratch it to the point that it's noticeable. I didn't really see you sand the logo itself here, but will the brite tone still adhere without sanding that part?
I sand lightly over the logo and go harder around the top and bottom!
Thank you so much for this video; it was so helpful. I'm going to try my hand at making these cause they would be great Christmas gifts!
I bling cups and was wondering if I can put just one layer of crystalac on the cup just as a sealant or would i have to do more than one layer? Thanks!
You don't want to put anything over your rhinestones! It will dull the shine.
@@AlisonCrafts putting under the rhinestones
Where can I find the wash and care guidelines for a Crystalac cup? Is it the same as epoxy? Also any idea of how long a Crystalac cup typically lasts?
It's the same. No dishwasher, no microwave, handwash only. I've been using mine daily for like two months!
Hi!! I used britetone, I did about 4 layers and curated how it was instructed but then it started to peel, few days later. Do you know what causes britetone to peel?
Did you prep your cup?
Alison Crafts don’t think so… how do you prep it ? Sorry I’m a beginner :/
You have to sand it. I do it in the beginning of this video 💖
I love this! Do you know how many cups you can get out of the Britetone?
Depends on the cup, design, and size Brite Tone you buy. I would say in a pint you should be able to get about 12-15 cups or so. Give or take.
@@AlisonCrafts Thank you! I'm new to working with vinyl and Starbucks cold cups. Not really sure I have the patience for glitter lol Do you by chance have any videos on layering vinyl?
I added my vinyl can I put my Brite tone after I put my vinyl to seal it?
You need to sand the cup before Brite tone
i looked into their website and it mentions to use ventilation and to use a mask as well. it also mentions that VOC is present, this was on the Extreme Protection. are they all like that? i want to be safe and use an alternative to resin, and possibly this if they’re all the same
It's exponentially safer than resin, it cures by evaporation so no fumes during the curing process. Vocs are in everything, including household cleaning supplies or your bedding. This has less than household cleaners. You should wear a mask if you're spraying the product but I never do that so I don't wear a mask. Here is some more info:ruclips.net/video/xjpPFivCpKU/видео.html
@@AlisonCrafts yes I know they’re in everyday items. I have been watching your videos using this product but reading that on their website I just wanted to make sure that this product didn’t come close to resin since it is really unsafe.
Hi Claudia where does it say that about ventilation and mask? I have looked everywhere on the site I don’t see anything?
I make one for my self but I don’t sand it so the resin came out 2 days later
I have a question. Would this also work on the color changing cups? I have a cup that I’m doing for work & I applied the vinyl & I don’t want the vinyl to come off when they wash it. Would the CrystaLac work to seal it down? Thanks
You can as long as you prep it first!
I’m making a cup for myself and want to know does the cup HAVE to be smooth in order for it to have protection? I don’t mind the slight feel of vinyl.
nope! you can leave it like that if you want! I'd say minimum 6 coats for solid protection.
I have a question I’m just getting started and the sealer I used I’m NOT happy with it. It feels tacky, do they all feel that way?
How long did you let it dry?
Thank you!! Quiestion, I just buy shiny brite tone and that’s it??
That's all you need! Here is my link: thecrystalacstore.com/collections/clear-top-coats/products/brite-tone-instrument-finish?sca_ref=301559.RjXXsfrXmN
If you're going to dive into tumblers they have a ton of other products you can get too!
I didn’t seal the bottom of my cup and it was sitting in condensation and it started to peel on the bottom, is that because I didn’t seal on the bottom? or could there be another reason?
hard to say for sure, how long did you let it cure before sitting in water? did you sand it before putting anything on it?
Why does mine look like it has smudges bad little bubbles after 4 coat what can I do to fix?
you're probably putting your coats on too thick
Hi! Is there a cure time needed for this product after applying it to the cup??
needs to dry 5 days before use but will continue to harden up to 30 days so best to be careful before then.
Great job babe we’re u got the glitter ✨
Hi, I had a question. So if I were to add the decal first would I have to then coat it with bright tone, put glitter, then coat it again? Thank you.
You could do the glitter on the first coat after decal
@@AlisonCrafts oh okay, and when you said you didn’t seal this cup, if you were to seal it what would you use? E6000 spray? Then let it sit for a few hours then apply bright tone?
@@karinaescareno8089 yep! You could also use clear spray paint but that needs to dry for 48 hours
@@AlisonCrafts great, thank you so much! 💕
@@AlisonCrafts could we use the modge podge sealer spray?
THANK YOU SO MUCH!
Do you keep your cup on the turner for the 4 hours or can it be placed on a drying rack upside down?
I spin for 1 hour and then transfer to a drying rack for another 3-4 hours
Can you seal a regular sticker with the crystalac?
Yes you can
I have glitter glue, should I use that or just use brite tone?
you can use either!
Does the cup need to keep spinning as it is drying during those four hours?
No, just for one hour and then you can let it dry on a drying rack!
Do you have to use a Turner? Or can it just be put on and set aside to try?
You can use the hang method!
Hi. does it dry hard? I tried my first cup and when done it felt coated but soft. is it because i didn’t dry long enough? or because i used mod podge?
What size is your vinyl, to go around the Starbucks logo?
If I don't have any glitter and just decals in which order should I do the steps?
Sand, (and i recommend spray painting a few oats of clear spray paint, dry 48 hours, vinyl, brite tone
What is the durability on a plastic cup like this with crystalac? Id be afraid it was crack off if the cup was squeezed or something. Or can it not be squeezed once the cup is finished because it’s hard?
I've been using mine for months and it's in great condition. the cups themselves are pretty rigid and take some effort to squeeze so i really don't worry about that. You'd probably break the cup by squeezing it without the crystalac. if anything, it's probably more durable with it on there
Alison Crafts Hi. I did this with the Manna color changing cups and it peeled and cracked when I squeezed the cup to snap the lid on. Those lids don’t snap on easily. Any suggestions as to what I can use on those to add glitter?
Because these cups are kinda flimsy and squeezable. Will the coating crack from normal use?
Mine are holding up just fine but if you squeeze it it could crack
i have a question, what do u use for bubbles? can u use heat?
No heat. If you're having problems with bubbles your coats are likely too thick
Do I add the decal after sanding before the first layer of crystalac then the glitter?
TIA
I would add it first so you can get it covered faster!
Thank you.
i love the glitter! ✨
So after coating the Starbucks cup with crystalac can it be washed like a normal cup?
Cups need to be hand washed
Hello, how did you add the vinyl without the crystalac lifting?
make sure you prep the cup. do a few coats first before adding vinyl. also make sure you have good transfer tape that isn't too sticky.
Do you cover the bottom of the cup each layer as well?
Yep!
I loved this video, thank you so much.
Glad you enjoyed it!
Can I use epoxy on a regular acrylic cup? I haven't used starbuck cups yet?
You can use epoxy on a double walled acrylic cup. Not recommended for single walled plastic. I use Crystalac though!
@@AlisonCrafts thank you so much. No one had given me a straight answer.
Hello this is probably a dumb question but do you get your cups from starbucks? Also where did you get the spinning machine that keeps turning your cup? Is crystalac toxic?
I get the cups from starbucks. Turner is from amazon, here is the link: amzn.to/31Hm2xd and crystalac is completely non toxic!
@@AlisonCrafts thank you❤😊
you did such a great job !
thanks!!
Can I used crystalac on a clear, acrylic cup without having to sandpaper it first?
You should always prep your surfaces. Scuff marks will go away after Crystalac is applied
Do the Starbucks tumblers have to be sanded every 3-4 layers as well?
Yes
Ok, so I’m started a cup.
I sanded and then added my decal then sanded again then added glitter with BT. Is that the correct order?
yeah! there's more than one way to do it, jsut keep going with your BT!
@@AlisonCrafts thank you so much!
I also have glitter glue, can I use that on Starbucks cups as well? If so, what would be the order?
I super appreciate you commenting back. I am so grateful❤️
I was applying my decal to the front of the cup and the Brite tone came off with the vinyl .... I didn’t stick. Any idea what I may have done wrong.
That happened to me as well, my glitter peeled right off and my cup looked brand new, I feel defeated with these cups :(
Did you sand? How many coats of BT before the vinyl? What kind of vinyl? What kind of transfer tape?
@@AlisonCrafts I used about 4 coats of BT and I used Cricut vinyl. I did sand but not as good as I thought I did
Can you do this process to hot cups?
yes, i've never done it but i don't see why not. just make sure you prep!