Build a Stun Gun at Home!? | DIY with a Charger Adapter!
HTML-код
- Опубликовано: 18 май 2024
- Build a Stun Gun at Home!? | DIY with a Charger Adapter!
In this video, we teach how to make a stun gun that is made using a mobile charger adapter. In the construction of this shocker, a high pressure converter module has been used, and we have also used a 14500 lithium ion battery to power it. We have used a cream pump plastic container for the body of this stun gun. Using this tutorial, you can easily make an electric stun gun at home. I hope you enjoyed making it .
_______________________________________________________________
About this video:
Charger Adapter
electric shock
High Voltage
Voltage Transformer
_______________________________________________________________
Main Parts:
Charger Adapter :www.aliexpress.us/item/325680...
100ml Cream Pump Plastic Container :www.aliexpress.us/item/100500...
400KV-1000KV High Voltage Generator Module :www.aliexpress.us/item/100500...
Rectangle Rocker Switch SPDT 6A :nl.aliexpress.com/item/100500...
tact switch :www.alibaba.com/product-detai...
lithium battery charger module :nl.aliexpress.com/item/324675...
Sony / Murata US14500VR2B 680mAh - 2A :eu.nkon.nl/sony-us14500vr2.html
410 rubber wheels robot tires :nl.aliexpress.com/item/100500...
_______________________________________________________________
Song: Alex Skrindo - Jumbo [NCS Release]Music provided by NoCopyrightSoundsFree Download/Stream: ncs.io/jumboWatch: • Alex Skrindo - Jumbo |...
_______________________________________________________________
00:00 Introduction
00:31 Preparing the charger adapter
01:25 Preparing the cream pump plastic container
03:18 Introduction and installation of high voltage generator module
04:22 Drilling and sanding the adapter and pump frame
06:04 Introduction and installation of switches
07:35 Installing the charging module
08:28 Lithium battery installation
08:58 Connecting high voltage generator module to adapter
10:21 Final gluing and finishing the work
12:49 Inserting the shock gun bottom frame
13:32 Performance test
14:20 Charge test
_______________________________________________________________
#stungun #highvoltage #plasma #tinyprojects #diy #homemade - Хобби
Very talented i actually looked at my charging adapter and thought of this then tapped this video
thanks
Hello
برای نصب و لحیم سیمها به درون کاور شارژر، سیم رو به سیخ چوبی کباب بچسبون.
The problem is that you have to get so close to an attacker that they can ether stab you with a knife or knock it out of your hand and if they touch you while you go to stun them you will stun yourself as well😂
😀🙏
@@tinyprojectsbetter than nothing😂
U sound like u never fought😂
you're just jealous you dont have talent like him😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂😂
11@@tinyprojects
very good
I hope you respond to this…
How did you learn to create this?
What steps did you take to reach this level of understanding?
Thank you
Learning in the field you are interested in and then being creative and starting to build from small things to achieve greater success.
Dude.. all he did was use a high voltage generator, the key component, it works with just the damn battery, actually… a battery and a high v generator with some wires is a complete taser and super common knowledge.
So all he did is make it chargeable and fit it in some plastic containers that looked ugly.
I made the same components and a 18500 battery fit inside a cigarette pack, was pretty sturdy actually. That is a much more powerful version of this one.
i like your talent
thanks🙏
Una pregunta tienes él diagrama que no se entiende bien. Y de donde sacas los circuitos? Donde los compras y que modelos son?
The circuit used is very simple and it is started only by feeding the high voltage module and you can find similar items with a simple search. To buy high voltage module and battery charger module, you can buy from reliable sites like Amazon.
Brother what if I use Power Bank Module T6845-C (5V Step-Up Power Module ) instead of Tp 4056?🤔
The t6845 module outputs about 1 ampere, but the current consumption of the high voltage module is more than 1 ampere and it may not be able to supply this current.
billahi akil 9at3 lka7la rafi3et ljohd mnin jibtha 3andi barcha lawej 3liha
What are the tools you use to make the holes and open the magazine called?
You can use any type of grinder or cutter for this
I heard that the one used by the police reaches 200,000 kv. When I saw you doing this, I wanted to play EMP again.
thanks for your coment
@@tinyprojects Teacher, have you ever used a jammer that blocks 2.4g, 5.8g and GPS signals?
No, but with a simple search on RUclips, you can find useful results in this field
Yaa correct
I only searched this up because I wanna make a real-life Shocker costume
its great , thanks
Super 😊
Thank you! Cheers!
For it to work correctly, the circuit must be connected in parallel to the battery. Not at the output of the charger module. The module only gives 1A and saturates and disconnects. I speak from my own experience. Greetings.
In terms of the amount of current, your opinion is correct. When we connect the battery directly to the module, more current will be given to the module. But in this case, the battery will no longer be protected against excessive discharge.
I like your video i subcribe you emm..... Im fom indonesia aku menyukai vidio mu
thanks🙏
Hello.
بشدت ناشی گری و بد صلیقه
و برای ته بطری ماژول شوکر، کافی بود ، از وسط برش میزدی ،
تهش غار حرا نمیشد.
Where i get a lithium battery charger module?
You can buy it from Amazon or Ali Express or any other online store
My guy using the stone polishing bit for a plastic bottle
It's okay . Creativity in DIY works is good
i have a charger adapter on my desk and i wanted to see if someone had made a tazer out of it and here it is
This looks highly dangerous I’m going to try it
No, it does not pose a danger to human life, but you must follow safety precautions
U can use even mobile adapter
yes
Please where can I get the 1000kv generator
Amazon
Can it stun an attacker
No, but if the number of its modules increases, it can
😊✌️✌️🙏👏👏👏
🙏😊
Thats not a stun gun, its a 'done gun'
How to makee a jammer?
Its circuit is similar to this one, but some details are different. If you search, you can find its circuit
Done
🙏
nice about 20KV at max good little thing to use the attacker wont know what your gonna do with that they will probably laugh there ass off and be like bro what the heck are you do with that then they get electrocuted ZZZZZZZZZZZZAPPPPPPP OWCH sorry for the dumb comment lol
Yes, this can also be a scenario. Thankful
è abbastanza potente per scioccare o non si sente
yes it can
Pfff, those cheap HVG burn too easily, try doing a real one if you don't wanna get in trouble with a taser that doesn't work when you need it!
Cheap and fake types burn quickly, but there are also original and high-quality types that work well.
soldering on a LiOn battery..no thanks
It is a little hard, but it is easy to solder with soldering oil
Is it real🤨
yes, sure
No is it cake
2
I can touch😂😂😂
So you are fantastic😂
6:45 Keyboards have an "x" button on them. Just because the numeric keypad incorrectly has an asterisk key, instead of a multiplication key, doesn't mean you should use that as a symbol for multiplication.
I wonder how many people got burned or died trying to copycat this method. 🤷🏻
thanks but i dont know
@@tinyprojects Reason i asked is, i just have seen a video called : The most deadly project on the internet.
ruclips.net/video/FBeSKL9zVro/видео.html
Also a DIY video with possible deadly consequences. maby you can put something like a warning above this?
No hard feelings, just good advise.
@@tinyprojects reason i asked, i just had seen a vid here on YT called: the most deadly project on the internet. Also a DIY video but people are dying. maby you can depict something like a warning above?
No hard feelings just good ment advise.
Regards.
I checked the video you sent the link. In this video, high voltage switching transformers are used, which are really dangerous and fundamentally different from the structure of this video. I always try to use very low risk parts in projects. to be Thank you very much for your attention in this regard and I will take it into consideration.
can it kill a person?
no it only shocks
خیلی وفت بیخود وسط کاردستی با نشان دادن صحنه های اضافی و غیر لزوم گرفته میشه کمی حرفه ای تر عمل کنیم تا عملا قصد طولانی کردن عمدی کلیپ القا نشه
It will be checked
Load of crap and that magic knife and drill crap, show people you doing the job right 😅
you seriously need to clean that soldering tip
Thanks for the reminder
Great video my guy…. you just earned your self a new sub🫶
🙏
THIS DOES NOT KNOCK A PERSON UNCONSCIOUS FOR FEW MINUTES SO YOU CAN GET AWAY FROM TACKERS ITS USELESS THEN....GET A LIFE
No, it can't, but it can if it is strengthened by several modules
@@tinyprojects Please elaborate more on how to with modules
In order to bend the tips of the plug you would have simply had to heat them up a little, then bend them and hold them, they would stay that way and to solder something on a battery you would have to use more flux. It probably took a while and was very annoying, right😅😉🫨
Thank you for your attention and guidance. Yes, soldering the battery is a little more time-consuming than spot welding, but it is easier to remove and replace the battery.