Thank you. I fixed it in no time. Didn't even jacket ot disengage the 4x4 . I just took off 9the the cover. Adjusted the bolt forward. It took 3 tries all done. It was a 15mm and a Cresent wrench. Thank you.
Thanks for the fix. my 2018 has been creeping for about a year. The only issue i have had since i bought it. Live too far from the nearest dealer shop to take it in to be fix. Glad i found your video. Easy fix. Thanks......New subscriber
Many thanks, Jonathan! Your instructions were spot-on. Took me about 1/2 hour to fix mine. That eccentric nut is VERY sensitive, as you showed. Took me a few tries to get it locked in place, plus the nut on the back side of mine (14mm) was loose, which may have contributed to the creeping. Thanks again from central Michigan.
good video. i've watched several of these and have adjusted my torsional dampener numerous times. this time, it came unscrewed from its connector at the back. gonna be a pita to put back on. i hate taking off the tires on my 1026R because it has studs and not lugs and lug nuts.
Thanks for the video, you need a 5/8 wrench for that bolt and it did come across as a little ruff on the video when you did the full throttle, maybe check your air cleaner.
I'm at 8500' elevation and although I had the turbo, I have to play around with the fuel screw to really tune it right. It's running much better now. Air filter was dirty as well as my fuel filter. Never enough time for all my projects!
Use some nouns. This part here? I need to replace the part you called this part here and It sure would have been a big help had you used A F'n NOUN and or a part number. Don't bother to reply becaus4e I have no doubt I have figured it out on my own.
Thank you. I fixed it in no time. Didn't even jacket ot disengage the 4x4 . I just took off 9the the cover. Adjusted the bolt forward. It took 3 tries all done. It was a 15mm and a Cresent wrench. Thank you.
Cool. Yeah, it's not a hard fix for an annoying problem.
Thanks for the fix. my 2018 has been creeping for about a year. The only issue i have had since i bought it. Live too far from the nearest dealer shop to take it in to be fix. Glad i found your video.
Easy fix.
Thanks......New subscriber
Great job!!!
I have been wondering for THE PAST 4 YRS why my 1025R rolled forward. No one I asked knew! Thanks to you I know AND can resolve!!!!!!
Glad I could help. RUclips has helped me out so much, that I try to give back when I can.
You are a Godsend!!!!
Many thanks, Jonathan! Your instructions were spot-on. Took me about 1/2 hour to fix mine. That eccentric nut is VERY sensitive, as you showed. Took me a few tries to get it locked in place, plus the nut on the back side of mine (14mm) was loose, which may have contributed to the creeping. Thanks again from central Michigan.
Thanks for letting me know. I appreciate that.
Thanx for the great video and this is exactly what mine is doing and I just replaced that cylinder that stripped out just like you mentioned
Great video! Thank you...
Thanks from Clayton, NY. You saved me hours in research, same problem
good video. i've watched several of these and have adjusted my torsional dampener numerous times. this time, it came unscrewed from its connector at the back. gonna be a pita to put back on. i hate taking off the tires on my 1026R because it has studs and not lugs and lug nuts.
Thanks for the video, you need a 5/8 wrench for that bolt and it did come across as a little ruff on the video when you did the full throttle, maybe check your air cleaner.
I'm at 8500' elevation and although I had the turbo, I have to play around with the fuel screw to really tune it right. It's running much better now. Air filter was dirty as well as my fuel filter. Never enough time for all my projects!
Good video
Thank you so much for posting
Mine doesn't creep but I know eventually it will.Gr8 video thanks for your time.
Very cool though. Mine creeps some.
That’s called the centric adjustment bolt you should lift right wheel off ground as you turn centric
Use some nouns. This part here? I need to replace the part you called this part here and It sure would have been a big help had you used A F'n NOUN and or a part number. Don't bother to reply becaus4e I have no doubt I have figured it out on my own.
lol...I basically don't know what anything on the tractor is called. They're all gizmos to me.
I fixed the creep and the uneven pedals now my transmission has problems. But I abused my tractor so it’s on me 😢
Woah! What kinda problems?
It's called a asentric bolt. Literally not centered.
Nice! Learned something new today. Thanks.
Easy fix
What the heck when he reved it up it was not smooth at all
Seemed to rev smooth to me, but I am at 8000ft elevation so that might affect it