I had today a similar problem, but the latch with the springs was ok. It was the hook in the bottom of the trunk. I took it out and saw that the holes for the screws are not completely round, but oval. Either somebody modified them or they come like that and it can be moved. Now I can close the trunk again.
Ok so my corolla 2006 trunk locks...but it doesnt want to Open I hace to use the emergency latch pully ... it wont Openthe lock with the key or neither from the inside? What could it be? That same spring???? Will appreciate any comments yo help me out
What is the size of the spring you add? Is it supposed to have a very little screw nowhere in the mechanism? I have a problem with my latch. It can not unlock. The emergency handle move only one part of "pliers". I found one very little screw squeeze in mechanism. I removed it but it does not help. I think the problem is this spring.
mine was the brass looking lever was so use. that over time it pushed itself away. used a flathead and mallet to push the brass one closer to the black lever. I also bought small springs for later. and dealer said the part was 160....cost me nothing to fix just my brain
Care to help me a little in my case? Its a bit similar. Mine doesnt close and i have to push the top mechanism down for it to actually attach to the bottom latch? Im not sure what moved out of place?
I just went to home depot and looked at the assortment and grabbed about a 2 inch then cut it to size and bent it to work. It's been about 2 or 3 years, so with my age the memory isn't what it used to be.
I used pliers, and hooked one side of spring then pulled the other side with the pliers and locked it in to place. I used a spring that was a little too big, but cut it in half, and bent one side in to a u shape.
Broooo. thanks a Million. my Firts Comment Ever !!!
You get a standing Ovation! And thanks for posting!
Thanks Mary I couldn't reply earlier because i wasn't using google chrome. Anyway I forgot to mention that the spring cost me only about 2 dollars.
Great video! My spring was missing. Now I have fixed it, and it works!
Glad it worked for you.
I had today a similar problem, but the latch with the springs was ok. It was the hook in the bottom of the trunk. I took it out and saw that the holes for the screws are not completely round, but oval. Either somebody modified them or they come like that and it can be moved. Now I can close the trunk again.
Ok so my corolla 2006 trunk locks...but it doesnt want to Open I hace to use the emergency latch pully ... it wont Openthe lock with the key or neither from the inside? What could it be? That same spring???? Will appreciate any comments yo help me out
What is the size of the spring you add? Is it supposed to have a very little screw nowhere in the mechanism? I have a problem with my latch. It can not unlock. The emergency handle move only one part of "pliers". I found one very little screw squeeze in mechanism. I removed it but it does not help. I think the problem is this spring.
Good job, Sukh, doesn't that mean success?
mine was the brass looking lever was so use. that over time it pushed itself away. used a flathead and mallet to push the brass one closer to the black lever. I also bought small springs for later. and dealer said the part was 160....cost me nothing to fix just my brain
Care to help me a little in my case? Its a bit similar. Mine doesnt close and i have to push the top mechanism down for it to actually attach to the bottom latch? Im not sure what moved out of place?
Junkyards are the place for this kind of shit
im confused... so was it the rubber that was actually stopping it from closing or was it the lock???
reeseghee yes the problem was the spring.
What kind of spring is it? What size because the assortment I bought none of them worked at all
I just went to home depot and looked at the assortment and grabbed about a 2 inch then cut it to size and bent it to work. It's been about 2 or 3 years, so with my age the memory isn't what it used to be.
When you was repairing it
My car have problems this home to fix
Hello how did you get the spring in
I used pliers, and hooked one side of spring then pulled the other side with the pliers and locked it in to place. I used a spring that was a little too big, but cut it in half, and bent one side in to a u shape.
I have a 2007 is it the same? Cause I see only 1 spring
Yea….I actually have 2 springs also but still not working right