Eliminator Mini Par Bar Reviewed

Поделиться
HTML-код
  • Опубликовано: 8 ноя 2024

Комментарии • 13

  • @matthewslodowy9025
    @matthewslodowy9025 Месяц назад

    Excellent review. Great video. I just picked up a set. So far, they look fantastic.

    • @LearnstageLightingGear
      @LearnstageLightingGear  Месяц назад

      Thanks, next time you need something, be sure to get it from us at aboveavl.com/

  • @croissantproductions
    @croissantproductions 11 месяцев назад

    Check out the new Mega Hex L Par, a super affordable par with lime LEDs!

  • @johnmcquay82
    @johnmcquay82 11 месяцев назад

    I have a very similar fixture under the UK brand of Prolight. Very good value fixtures. The kit as a whole is a little different in that the lights are COBs rather than discrete LEDs and the bags mine came in suuuuuuck... The zippers broke in next to no time; only other gripe in my case is the stands; very light-duty and far too short. I'm not particularly tall (around 5' 10") and they're barely shoulder height.

  • @TheLivingFossils
    @TheLivingFossils 3 месяца назад

    How do you feel about this unit vs the ADJ Starbar Wash RGBW Par LED you reviewed in another video? Looking for starter lights for my band to bring to small/medium shows. I'm also looking at the Chauvet DJ bars.

    • @LearnstageLightingGear
      @LearnstageLightingGear  3 месяца назад +1

      They're both really good. I like the ADJ/Elim models a little better than the Chauvet ones. The Starbar appears to be headed towards being discontinued, and I have to say, I am surprised at how well the Eliminator Mini Par bar works. I had put them side-by-side at one point, and the Mini Par bar was brighter by a little.

  • @alexedwards9566
    @alexedwards9566 8 месяцев назад

    Would you place these in front of the band or behind? Or maybe on each side with some pointing forward?

  • @randydunn7164
    @randydunn7164 3 месяца назад

    are there any instructions on how to setup/control these with a controller the Manual is vague on this

    • @LearnstageLightingGear
      @LearnstageLightingGear  3 месяца назад

      It's going to somewhat depend on the controller more than anything else. Once you set the DMX address according to where your controller patches it, then the rest of the control is all on the controller side.

  • @isaiah3g.
    @isaiah3g. 6 месяцев назад

    Are each of the pods individually addressable?

  • @Vanhalen1
    @Vanhalen1 2 месяца назад

    Is there a non blinking mode?