Electrical Apprentice Hand Tools you'll need
HTML-код
- Опубликовано: 21 авг 2024
- ELECTRICAL APPRENTICE basic hand tools.
Quick basic list involves:
VDE 1000v rated:
-pliers
-siddecutters
-screwdrivers
Non VDE Tools:
-conduit cutters
-knife
-level
-needle nose pliers
-permanent marker
-pencil
-biro
-note pad
-allan keys
-multigrips
-adjustable spanner
-plaster saw
-security bits
-data punch down tool
-tin snips
-larger cable cutters
-hammer
-inspection light
-head lamp
Tool links-
Klein Pliers: 12098EIN
AUS Amazon link: amzn.to/3sz8iUk
USA link: amzn.to/3qoTO6V
UK link: amzn.to/3Esgx79
Wera stainless screwdriver set: WER022728
AUS Amazon link: amzn.to/3HcJrdb
USA link: amzn.to/33YHanG
UK link: amzn.to/3Es8Y08
Bahco adjustable wrench: 9031
Australian Amazon link: amzn.to/3HgkBcz
United States Amazon link: amzn.to/3FxQUDe
United Kingdom's Amazon link: amzn.to/3prRtJh
Milwaukee Tin Snips: 48-22-2530
AUS Amazon Link: amzn.to/3Hd7VTK
USA link: amzn.to/3Jm6ZhQ
UK link: amzn.to/311yhbU
Mid west tin snips: MWT-6716S
AUS Amazon Link: amzn.to/313BpUI
USA link: amzn.to/3HdbPvS
Wera Allan keys metric: 5022089001
Aus Amazon Link: amzn.to/3prcnYT
USA Amazon link: amzn.to/30X9d5G
UK Amazon link: amzn.to/3FtbWTn
Wera Allan keys imperial:
Aus Amazon link: amzn.to/3eogPBn
USA link: amzn.to/3swNqgu
UK link: amzn.to/3H8G07i
Cheaper full Allan key set. Imperial + metric. Draper: 33894
AUS Amazon link: amzn.to/3JkDywz
UK link: amzn.to/3qo2eeW
Krone tool data punch down tool:
Aus Amazon link: amzn.to/3mtRr1l
UK link: amzn.to/3emnQ5R
110 punch down tool: Klein Tools VDV427-300
Aus Amazon link: amzn.to/3qnX1no
USA link: amzn.to/3qoUidf
UK link: amzn.to/32CjZP9
Unilite inspection light IL-175R and head lamps
promo code ATT25 for 25% off
Aus Link: unilite.com.au...
UK link: unilite.co.uk/...
NA link: unilitena.com/...
Parrot beak cutters: 63050 Klein tools
AUS Amazon link: amzn.to/3mzLlge
USA link: amzn.to/3FwAFWZ
UK link: amzn.to/3sz13vG
Ridgid conduit cutters: RC-2375
AUS Amazon link(cheaper in store): amzn.to/3qmwo2c
USA link: amzn.to/3szDXp0
UK link: amzn.to/3priyfx
Channellock multigrips:
AUS Amazon link: amzn.to/3pq05zR
USA link: amzn.to/3pq3nDd
UK link: amzn.to/3Jm9eSi
Knipex multigrips: 8601250
AUS Amazon link: amzn.to/3qspXua
USA link: amzn.to/3Jinr2A
UK link: amzn.to/3JtdZtg
Milwaukee fastback knife: 48221501
AUS Amazon link: amzn.to/3mxHgJl
USA link: amzn.to/32ySrKP
UK link: amzn.to/3erbvNw
Milwaukee hawkbill knife: 48221525
AUS Amazon link: amzn.to/3sz0ger
USA link: amzn.to/3Fs8Lvq
Security bits:
AUS amazon link: amzn.to/3sD2XeO
USA link: amzn.to/3svQNnV
UK link: amzn.to/3Jte93Q
Knipex vde Long nose pliers: 2618200SBA
AUS Amazon link: amzn.to/3er8Inw
USA link: amzn.to/32nIUpW
UK link: amzn.to/3HsbTrR
Cheap 300mm long nose pliers:
AUS Amazon link: amzn.to/3st6EDU
USA link: amzn.to/3HgpRNl
UK link: amzn.to/3emsXTx
Cheap 150mm long nose pliers:
AUS Amazon link: amzn.to/32AZ0MB
USA link: amzn.to/3JlpDGg
UK link: amzn.to/32D0Qgh
Cheap Irwin level: 1794159
AUS Amazon link: amzn.to/3Hs8JnZ
USA link: amzn.to/3EnBrnL
Milwaukee level: 4932459097
AUS Amazon link: amzn.to/3JhwkJs
USA link: amzn.to/3z1Vbwb
UK link: amzn.to/3FyyjH9
Milwaukee Plaster saw: 48220304
AUS Amazon link: amzn.to/3przDGh
USA link: amzn.to/3myxExY
UK link: amzn.to/3sxDYtm
Milwaukee foldable plaster saw: 48220305
AUS Amazon link: amzn.to/3HdaDZq
USA link: amzn.to/3suN61X
UK link: amzn.to/3JfQdRl
Wiha electricians hammer: SB846300E
AUS Amazon link: amzn.to/3yWvRHU
USA link: amzn.to/3yZQVgX
UK link: amzn.to/3HflFx1
Estwing 20oz hammer: E3-20S
AUS Amazon link: amzn.to/3sD28me
USA link: amzn.to/3em58eq
UKAmazon link: amzn.to/313LEs8
Knipex Side cutters: 74 06 200
AUS Amazon link: amzn.to/3sygfZX
USA link: amzn.to/3FveLn9
UK link: amzn.to/3ppMDw3
Knipex flush cuts:
AUS Amazon link: amzn.to/3pqgrIO
USA link: amzn.to/3yW4X37
UK link: amzn.to/3mTBDpd
Other tool related videos:
Milwaukee tote tool setup: • Electricians tool bag....
Pouch tool setup tp3b: • What’s in my VETO PRO ...
Mediam tool bag and small pouch setup, veto mc mp1: • Veto pro pac Mc and mp...
Veto tech xl tool setup: • VETO PRO PAC TECH XL l...
www.addictedtotools.com
Contact details:
sales@addictedtotools.com
milwaukee tools apprentice tools apprentice hand tools electrical
Advice i got as an apprentice was that, "you don't make enough money to buy cheap tools ". Me personally i have always opted for quality tools that i can keep for a lifetime, rather than replacing yearly.
as for conduit cutters, check out the L-42A model. Multiple brands use the same model and just re brand them, i have found them to last a long time.
I love my bahco shifters, get the wide mouth ones though, great for glands.
I swear by the Stanley plaster saws, stiff blade and cut through most things
A 150mm ruler in your pocket is super handy.
I’m a 3rd year about to go into my 4th year and I’m about to get my first work Ute/van I have all my hand tools and. A couple power tools but would love a video like this talking about what I need to get like socket sets, spanner sets, power tools etc
ive got the Bahco 229 piece socket set which includes a 11 piece spanner set
I bought a 18v fuel 10 pce milwaukee set as a 1st year sparkie,
I then bought the 12v fuel impact driver to cut down on the weight. I wish i started with the 12v platform, the little 12v impact driver packs an absolute punch. It keeps up with my 18v impact and is literally half the weight of the 18v 6ah battery
Cool. We also call the channelock style pliers tongue and groove pliers in the US.
Knipex are the best at just about every pair of pliers out there.. buy once cry once. What I found out you're not using any Knipex for last 30 years. And now just starting to use them jobs that used to be so difficult are almost easy now 😃 I do just about everything a lot of electrical or real lot of plumbing a ridiculous amount of carpentry tile drywall flooring bathroom kitchen remodels..
In the US we use emt for commercial work rigid pipe for industrial
I’ve used rigid when running a circuit in a trench
Dutch spark here, we work with round cables so its a lot easier for us to strip cables, to strip small portions i use smth like a cable shear from knipex, break the outer layer and pull it off. Longer lengths i use a cable stripper with a small knife in it that splices the outer layer.
I use the Wiha slimline screwdrivers which I have no complaints about. And as for conduit cutters I have Milwaukee pipe cutters which I can just get through 32mm pipe , anything bigger I get a reciprocating saw out . Thanks for the video
Get traide force conduit cutters
As an apprentice i was advised to get a pair of black panthers. Highly rate them
The crimper on combination pliers seemed like a nice addition if you did regular non-insulated crimps, otherwise, it was an unnecessary addition to make use of an unnecessary extension between the insulated grips and the pivot point of the pliers, but 20-plus years ago that was all that was available, so I wouldn't suggest that a modern apprentice use a one size fits all version of pliers when they have access to a range of pliers from 160,180 to 200mm to better suit the individual's hand size as you seem to have discovered by accident by using the NWS 205mm over the legacy 220mm pliers. You wouldn't give an apprentice XL gloves to work in if they needed Large or medium or vice-versa.
Your enthusiasm is great but being Addicted to tools doesn't mean using the same tools your tradesman used like following some type of tradition when better tools exist, it means thinking about which is the best tool for the person.
I would love to hear your opinion of the bare minimum you need for your first day starting an apprenticeship.
Corey Bruhn says Eye protection, Hammer, Jab Saw, VDE screwdrivers, VDE pliers, Level, Tape Measure, a nikko, a pen and a builders pencil, utility knife and a cheap toolbag.
the irwin conduit cutters aren't too bad for a cheap option
also another helpful tool is a gpo cutout template (sparkymate)
I’ll have to give the Irwin’s a go. Might be worth getting a few other brands to see what’s worth it. Sparky mates are definitely worth it. Good pickup👍
The gap in the plier jaws is to allow the cutters to fully close.
who calls multi-grips - channel locks, it's not like calling an insulation testing meter a Megger or single and double screw connectors BP's after the brand Blue Point.
Got Wera slimfix screwdrivers recently (from Haymans of all places) and they are as good if not better than the stainless ones 👌 Great vid keep em coming
Good to hear. I might have to look at Haymans and see how much they’re going for. Cheers
I use a nitecore headlamp that's got a built in battery with USB charging as well as AAA so im never without power on it....my flashlights, headlamp, phone, tablet, inspection cameras etc all have a dedicated USB C charger in my truck so I can charge between jobs.
the Milwaukee plasterboard saw has the inward-facing teeth which being flat on the outside don't often tear the plasterboard paper as long as the teeth of the saw aren't too deep then tearing is a problem.
Amazing work on this videos, with the links for every tool!? Cheers mate we’ll done love tools and your channel is a MUST. Thank you for all your work.
Lower your sign in the backround by 450mm.👍
5:20 as a controls spark, my Wiha Pocketmax lives in my work trousers at all times. Slim interchangable bits are mega. Use mine for everything PH2 down to SL3, bigger than SL5.5 that I tend to use non-VDE Vessel, either my 6800TD ratcheting driver, or set of striking drivers for abusing the ever living fuck out of.
I agree that Milwaukee head lamp goes through battery quick. Buy Amazon basic rechargeable battery very cheap for them. Klein just came out with a cheap rechargeable head lamp.
You were correct, we use alot of EMT in the United States, as well as Ridgid Metal Conduit
Cheers for the confirmation mate. 👍
No problem, love your content keep up the good work
Try wiss tin snips they also do scissors for tin. Razor sharp last quite a long time to
I tried Swiss awhile ago before the Milwaukee’s. They were good. I feel they didn’t last that long but it could have been what I was cutting😆
I've used the wiss for a few years now can't fault them. Think they are great
In California we use a lot of EMT OR Rigid conduit, we use pvc for underground
Here in Maryland for solar we have run rigid underground for solar circuits
Here in the states we use a hammer with a straight back to use. As a Chisel for block walls.
Its called a rip claw
Bahco slimline screw drives are the best! Normally $50 for the set at TLE or go electrical
Get traide force conduit cutters, absurdly good
Great video. Side cutter are linesmen pliers not dykes or diagonal cutters. Though that's here in Canada.
Great video! Good selection
Thanks mate. It all gets the job done👍
Felo screwdrivers is what I use, they’re awesome
I have used those briefly. Really nice. Similar to the fluke range👌
@@AddictedtoTools the fluke range are just the rebranded Felo’s
Just gotta know how to use the cross cuts, best pliers out hands down
Great video mate. Really appreciate the insight and now have a shopping list 👍
Thanks mate. I appreciate the feedback. Have a great new year🍻👍
aye 😄 the ad on this video was from you.
Another quality helpful video Matty!
Thanks mate. Always a pleasure. Hope you’ve had a good Christmas 👍🍻
I like the wiha slim drivers1000v ones
unless the insulation of the cutters is damaged, you are not in danger of a shock from a 240 volt circuit.
Awesome video. Thanks
Cheers mate. Are you in the trade?
@@AddictedtoTools I'm a self-taught, residential electrician. Your videos are very helpful. Keep up the good work!
Don't need a tape measure? haha, good vid man
Yeah someone else brought that up. I Totally missed that one some how😂. Cheers mate 👍
Calls bahco an okay shifter haha
Bahco invented the adjustable spanner mate! :p
I believe Irega makes them for them nowadays, channellock shifters are also made by Irega.
Thanks for the info mate. I’m not sure what them inventing the spanner has to do with how good the spanner is though. I definitely do like their gear 👍cheers
@@AddictedtoTools bahco is the industry standard in Europe. They’re amazing, especially the old made in Sweden ones.
The crosscuts we call lineman's. Interesting
Great Video
Thanks Ben.
It makes complete sense that Australia is behind on any new technology, even if the technology is over 50 years old.
What technology are you referring too Dan?
@@AddictedtoTools Cable strippers, Auto cable strippers, electric cable strippers. Or just sharpen your teeth if its a desperate need to prove your manhood and some bubblegum for a bit of voltage resistance.
All sarcasm aside I have worked as a contractor in Australia a number of times doing industrial installation of automation equipment. The union electricians on site were better at giving the cables a hair cut and needing bandaids then just getting the job done. I had a pair of auto strippers and they all looked at me like I had a third arm. They also got pretty mad when I had to redo a lot of their work because of the butcherd cables and exposed copper. I wasn't going to let them waste my copper anymore.
You might be the rare, possibly endangered species of Aussie that activity wants to do a quality job and pround of owning quality tools. Wish you would of been on site, I had days of rework and issues with stewards unable to get the call filled.
Were my experiences just a series of odd moments, possibly just bad luck? Or are there a lot of sparkies in Australia and the company possibly pissed off the union and the steward purposely sent window cleaners to the wrong jobsite? (ETU in Queensland area if I remember correctly)
What about a tape measure most important tool
I have no idea how I missed that one. Good pick up
Did you not see that giant orange klein? Because that's all you need as an electrician
check out greenlee pvc pipe cutters, quite slick the set we got
Will do mate. It’s hard to get green Lee gear over here, but I’ll try👌
Ferramentas top parabéns 👏
Wiha slimline nice
Good video mate, haven't been a sparky for years but looking to get my UK qualifications recognised here in Aus. Suprised not to see a junior hacksaw in there somewhere. Maybe don't use much SWA in Aus?
Hey mate you’ll have to redo the apprenticeship in Aus
@@Ifyourreadingthisurbeautiful Yes it's starting to look that way, really suprised how difficult it is even to get good information. Everyone I ring or email just has me going round in circles.
bahco is a off shoot of snapon tools
Good video mate, just wanna know what brand volt sticks you recommend as I know some can be dodgy
Most can play up but fluke have been more reliable.
Thanks for the great video!
I have a cheap pair of multi grips - but some of the guys have the Knipex and they’re so much better! So expensive though. I’m hoping to get some in the future.
That inspection light looks great, Would have been super handy for what I was doing today actually!
I have a Pica marker and it’s been great for getting into deep spots that the regular Milwaukee wasn’t thin and long enough to reach.
Can I ask where did you get the el cheapo ‘workzone’ range of screwdrivers?
Hey Kelsie. The knipex are definitely expensive but well worth it. They’ll last along time and work better usually.
The inspection light is one of my favourites. So handy!
Those workzone screwdrivers are from aldi. They sell them usually once a year. I did a whole post on them awhile ago. Good gear for the price.
@@AddictedtoTools oh yes! I remember seeing you buying a whole heaps of tools from Audi. Unfortunately we don't have Audi down here in Tassie! :(
Wiha slimline screw drivers are grouse
Man, a razor is all you need to wreck the lovely drywall. 9:45
Wow crescent Plers and Stanley screwdrivers is a staple for a Australian apprentice why overcomplicate things
Hey mate. Could you clarify what’s over complicated? Cheers
@@AddictedtoTools Have had many many apprentices basic hand tools that you can pick up from Bunnings why even bother with a 110 tool .Even just a simple Stanley retractable knife lots of things you can do with a Stanley knife best way to learn using that knife safely .There was a basic tool kit NECA issued to apprentices before they started ,do some research was part of the award and what a apprentices tool kit had to have .What to encourage apprentices to take the trade up not over complicate it.
I’m not really understanding what’s over complicated here…
@@AddictedtoTools your video was directed towards electrical apprentices and didn’t even include a set of test lamps basic of basic ,yet included a 110 tool .
This video was for hand tools. Not test equipment or power tools. Which part is over complicated?
I'm looking for some security torx screwdrivers the ones with the hole and would prefer them to be insulted is there any in particular that I should get
You forgot about a tape measure :P
Ну, чтл касается меня, лучше отвёрток чем Кляйн Туул нет.
What brand is your inspection light and how much does it cost ??
Hey Matty. It’s a unilite il175r. I have the links to the websites in my bio. Also there is a unilite discount code if you were looking to buy. ATT gets 25% off. Let me know if you have any problems. 🍻
@@AddictedtoTools legend thanks mate
The Allen keys you said that came in a kit are kinchrome
Do you recommend going high or low quality tools to start your apprenticeship?
High quality. Buy once, cry once. If you get crap tools you'll regret it and have to buy them again. I'm a 3rd year and only buy the best. It makes work waaaay better.
What is the name of the cross cut pliers being held at 1:48? (EDIT: They are Wattmaster) They look similar to the Yellow/Orange grip Marvel's which I cannot NOT get anywhere being in the US. Anyone who can tell me another brand or type like the cross cut Marvel's or Wattmasters that may be available to me in the US?? Thanks to all in advanced and GREAT VIDEOS ATT!!!! Keep it up!
Yeah they are wattmaster exactly the same but made in Taiwan not Japan. I don’t believe anyone sells them in the USA. Most I know have ordered them elsewhere
What brand is that folding plasterboard / jab saw?
It’s a kanga flip saw. Milwaukee has one as well
wait... so im supposed to use more then my 15in1 and my kliens?
I'm concerned that when you strip the outer sheath of the 2.5 T&E with the cutters of your pliers, you might be squashing the insulation of the cores, then when stripping the cores you could be stretching the insulation which would pull and weaken the insulation further at the point of the squished single insulation creating a point of failure. ( of cause, cable strippers that are set to remove the outer and inner insulation would be the better tool to use to stop this from happening)
Got the packout radio? Would love to see a review on it
I would absolutely love the packout radio. I can’t justify the price though. I’ll see how we go this next year and maybe put it on the list.
What brand clampmeters/ multimeters would you recommend for an apprentice?
Fluke man. All day every day.
Klein meters are the way to go for the buck. If you have money to burn get a Fluke. It won’t be any better but you will have less weight in your wallet.
Where can I get the uni light i am in Australia
unilite.com.au is the main place.
They don’t have the full range yet though. So some gear has to be ordered from unilite.co.uk
Code ATT25 gets 25% off
VDE rated so that you can cut live cables ?
Incase you cut live cables👍
VDE rated because mistakes happen to the best of us
Interested to talk cuz most of ur tools seems unnessesary. I'm at 15 years in the trade from norway . I choose to avoid every kilo i can
For sure mate. What tools would you say are unnecessary? As I use most of this often. Cheers
Just btw it's pronounced "nipex" the 'K' is silent ⚡🎇🔌😉
Nah, it's German so it's pronounced kinipex
That’s just as dumb as saying the K in Klein is silent
Knipex literally released a t-shirt that said “it’s pronounced Kuh Nip Ex” lol
Forgot about tape measures