I would have put some locking compound on the caliper bolts. It you were to buy replacement bolts from the dealer they will have it on the bolts ready to go. I don't know the torque value is for this particular model.
Salve a tutti,ma per smontare le pastiglie anteriore bisogna agire sul computer di bordo e andare a sbloccare le pinze come succede al posteriore? Grazie
@@Critycal1 you are correct however merc dealership always says put it into brake changing mode for either front or rear but hear where your coming from for the parking brake ect
@@Critycal1 I have same problem. warped rotors and brakes are good. = ( I am looking at buying Euro-Stop performance brake pads rotors kit. Has anyone heard good things about them?
If you are asking about the wrench or tool that is blue with black, that is a caliper compression tool, it compresses the caliper pistons back in, for when installing the new rotor and brakes all fit back in as the new part will have a bigger thickness
@@Critycal1 when you use it to push back the pistons, you can put the old brake in the caliper between the tool and the pistons, it just same your time
Great job!!!!
Thanks, I follow you, amazing videos @TheFlexxGarage
This was great saw a few times and i ready to tackle it! Thanks bro for this vid
Great video sir 👍🏻👌🏼
Thanks
Good job!👍
Great video.
Because of warped rotors
Did you have to reset or relearn the new sensors after removing and replacing with a new one?
No, the sensor just works, no special requirements
I would have put some locking compound on the caliper bolts. It you were to buy replacement bolts from the dealer they will have it on the bolts ready to go. I don't know the torque value is for this particular model.
Thanks for your suggestion
Thank you for video , great tutorial.
Glad you liked it
Can you use the caliper compression tool on both the front and rear ?
No, for the rear just use the regular caliper compression tool for single piston
Did you have to enter the brake service mode or is that only for the rear brakes? Thank you
That brake fitment mode is for the rear only, front is done as normal
Thank you @@Critycal1
@@kostask4437 you are welcome
Brake assist is only for the rear brakes only correct?
Yes, it's brake fitment position and it's only for the rear brakes because of electric parking brake
Do you have to bleed front brakes?
No, because we are not touching the bleeder screw, the fluid is being pushed back to master cylinder
@@Critycal1 Thank you
Well done! Thank you!
Glad it was helpful!
Salve a tutti,ma per smontare le pastiglie anteriore bisogna agire sul computer di bordo e andare a sbloccare le pinze come succede al posteriore? Grazie
No, just remove brake fluid reservoir cap, for when pushing or closing calipers pistons fluid can return to reservoir with out pressure
good vid should add the bit where u have to tell the car to go into brake change mode
That is for the rear brakes
@@Critycal1 you are correct however merc dealership always says put it into brake changing mode for either front or rear but hear where your coming from for the parking brake ect
Awesome dude. Where did you get your parts?
Parts at the dealer, but there is cheaper for the same quality parts, some tools I ordered from amazon, most I already own
What torque is the caliper bolts?
I don't know, sorry
Your old brakes did not look bad at all especially the rotors.
The rotors somehow got warped
@@Critycal1 I have same problem. warped rotors and brakes are good. = ( I am looking at buying Euro-Stop performance brake pads rotors kit. Has anyone heard good things about them?
It would help if you had compressed the piston when you removed the brake pads or even with the pads on.
What does the caliber adjusters do
If you are asking about the wrench or tool that is blue with black, that is a caliper compression tool, it compresses the caliper pistons back in, for when installing the new rotor and brakes all fit back in as the new part will have a bigger thickness
@@Critycal1 when you use it to push back the pistons, you can put the old brake in the caliper between the tool and the pistons, it just same your time
please get a high torque impact driver which will make your life easier.
I have one, but did not use it
how much torque
The car is stock, and torque is about 275
qual é o tamanho dos discos
Disk are stock, amg line, jot sure of the size
👍👍🙏🙏👏👏