This was so easy to follow and I think I can actually do this on my own. Thank you so much for such a great how to. I'm gonna watch your next video now on how to replace stereo. Thanks again. Great job
Alex thanks very much for the great video. I just replaced the 4 original Infinity door speakers in my '03 Jeep Liberty Renegade with Infinity Reference 6532EX shallow mount speakers. Your method worked wonderfully. I used the same speaker mounting brackets as you suggested as ones that came with the speakers did not fit as well. I also replaced the dash tweeters with a pair of Infinity Reference 375TX component tweeters along with the included crossovers. The sound is amazing...now I wish I would have purchased the underseat subwoofer option when I originally purchased the Liberty new off the lot. Once again thanks much for the video!
Great video! I watched a few others that left me with more questions than answers. This one was clear, made sense, had decent and usable footage (as opposed to some others out there). Thanks!
i know this video is super old, but you did an excellent thorough job explaining everything man. only thing i would suggest is instead of tape on the speaker wires, use heat shrink wire loom (very cheap and can be found in Walmart/ almost any auto store/ or online. (i was honestly looking for videos on the window motor repair and came across this and decided to watch because while i'm in there im replacing the speakers as well) good video my guy.
Thank you! Was super helpful! My dad's jeep speakers weren't working but this helped me take off the door panel and find out that the speakers weren't plugged in because the amps weren't mounted. Can you show how to install the tweeter speakers on the dash?
Good video but the liberty has a pair of twitters installed on your dashboard. So it could be more correct to install in the door a middle dynamic without witter and to install the new separated twitter on the dashboard.
the speakers have a massive gap, because of the nuts on the amplifier preventing the speaker from sealing to door. Can be seen @4:23. This will sound bad and reduce bass. Could be fixed with some dynamat or other sound deadening to seal the speaker. It would be better to mount those amplifiers further down so the speaker can seal.
Great video but U actually do not have to slice the connectors from amp just add connectors to other end that came with speaker save the amp and keep tight connections . Just like adding a extension cord .
Mine did not come with a factory amp, just the oem jeep speakers. I've been rewiring it for the last 2 weeks after a shop messed it up. Is there an easy way to hook new speakers up by feeding wires into the door, or is it just a pain?
Sorry for the late reply I’m not too sure what size they are I used what I had in the garage but if your try homedepo they might have a size that will fit,
I believe the original Jeep speakers are 2 ohms (at least mine are) and the speakers you replaces yours with are 4, have you run into any problems surrounding the difference in ohms?
Do you know if it would make any difference if you bypass/removed the factory amps rather than use them to power the speakers? Wasn't sure if it's worth the hassle of figuring out how to do the bypass. Also, is there any reason why you went with those model of speakers and did you only replace the front speakers? I'm planning on replacing my speakers and stereo in my 06 but I wasn't sure on how to go about doing it. Thanks!
I replaced both front and rear, I went with these speakers because they were mid ranger speakers for the price, you could bypass the amp it would be a lot more work it might make a slight bit of difference if you bypass the amp instead of keeping it but I’m not too sure
Where did you get the mounting plate for the speaker. Bc i just changed one of my sisters speakers. And i had to use flashing bc the speaker was to small. Would be so much easier when i change the other one if I had one.
esta muy bien la adaptacion pero CUIDADO el stereo no debe estar amplificado. el original de jeep no esta amplificado pues tiene los aplificadores en las puertas delanteras el 90 %de los nuevos stereos estan amplificados .y si los colocamos con los amplificadores de las puertas .reduciremos la vida util del equipo y el sonido no es bueno.
Hey Alex did you have to buy the mounting brackets for the speakers separately if so where did you find them? All the speakers I find bolt directly to the door but I think it looks a lot cleaner with the mounting bracket.
What's the power output of each of the speaker amps? Might have sounded better using the headunits internal amp. Factory amps aren't known for their sound quality. Plus, while you were in there, should have added some sound deadening/dampening material. That probably would have made the biggest difference in sound quality. Thanks for the video though. Will come in handy soon.
Albert Prislac yes you can, it might be a little more work but it is possible, just make sure you have a water tight seal around the butt connections Thank you for the comment and watching my video
@@alexautomotive28 Another question. I'm about to change my speakers in my Liberty so I've been studying your video haha, why didn't you just connect the amp to the speaker directly? Thanks!
I haven't done this mod yet but plan to. Anyways, Alex I fucking love you for making this!!! I know my job is going to be much easier. Also, how much louder / better sounding are the speakers you used for this install? The speakers I have are 2 ohm 92db w/m sensitivity as opposed to your 4 ohm 92db w/m ones. Only asking because the stock system doesn't get nearly as loud as I want so I'm assuming it's sensitivity is much lower. My thinking is if the speakers you installed get plenty loud, then my 2ohm ones should be even louder
what is SORDER ! solder is pronounced as its spelt ! sold er and put it all together its solder ! simples, you dont delete the L and put a R in its place...
What a condescending little snot you are... Solder is a modern spelling of the Middle English sawder/soudre, which derives from the Old French "soudeur", which itself comes from the Latin "solidare". In the 15th century there was a movement to re-latinize the spelling of words, and the "l" got added back in to the spelling, although the pronunciation didn't change to include the "l" until sometime later. Regarding the dropping of the "l" from the original Latin, that was common in Old French, and is why we say, for example, the word "powder" instead of "pulder".
Very well done and informative video young man. Very helpful. Thank you.
This was so easy to follow and I think I can actually do this on my own. Thank you so much for such a great how to. I'm gonna watch your next video now on how to replace stereo. Thanks again. Great job
Thank you for liking my video, I hope that yours went great for you
I'm about to upgrade the speakers in mines...This video was better than school...very detailed... helped out A LOT. Thanks *thumbs up*
You are welcome I hope everything goes good for you, thank you for watching
Alex thanks very much for the great video. I just replaced the 4 original Infinity door speakers in my '03 Jeep Liberty Renegade with Infinity Reference 6532EX shallow mount speakers. Your method worked wonderfully. I used the same speaker mounting brackets as you suggested as ones that came with the speakers did not fit as well. I also replaced the dash tweeters with a pair of Infinity Reference 375TX component tweeters along with the included crossovers. The sound is amazing...now I wish I would have purchased the underseat subwoofer option when I originally purchased the Liberty new off the lot. Once again thanks much for the video!
You are so welcome, thank you for watching my video and I’m glad everything worked out for you!!
Great video! I watched a few others that left me with more questions than answers. This one was clear, made sense, had decent and usable footage (as opposed to some others out there). Thanks!
Excellent job, gives me the confidence to do this on my own!
This kid's good
i know this video is super old, but you did an excellent thorough job explaining everything man. only thing i would suggest is instead of tape on the speaker wires, use heat shrink wire loom (very cheap and can be found in Walmart/ almost any auto store/ or online. (i was honestly looking for videos on the window motor repair and came across this and decided to watch because while i'm in there im replacing the speakers as well) good video my guy.
Thank you for watching, next time i do this ill will be using heat shrink
Thank you! Was super helpful! My dad's jeep speakers weren't working but this helped me take off the door panel and find out that the speakers weren't plugged in because the amps weren't mounted. Can you show how to install the tweeter speakers on the dash?
Thank you for the link for the mounting plate
Nice video and very well explained, thanks.. Blessings From Sonora, Mexico.
Fantastic job man keep it up! I own an '02 and it needs new speakers bad...I'll use this technique!
Thank you for watching
Love the videos jeep liberty 04 I own now
Very helpful can do it in 20 minutes flat now thanks
Good video but the liberty has a pair of twitters installed on your dashboard. So it could be more correct to install in the door a middle dynamic without witter and to install the new separated twitter on the dashboard.
the speakers have a massive gap, because of the nuts on the amplifier preventing the speaker from sealing to door. Can be seen @4:23. This will sound bad and reduce bass. Could be fixed with some dynamat or other sound deadening to seal the speaker. It would be better to mount those amplifiers further down so the speaker can seal.
great video!
you think 16.5cm (6.49inch) speakers fit without that mounting bracket for mounting them?
Great video but U actually do not have to slice the connectors from amp just add connectors to other end that came with speaker save the amp and keep tight connections . Just like adding a extension cord .
I want to do the same but where do I buy the two small cables that connect the speaker?
Спасибо из далекой России.
Great, vid.
My speakers are not working!
How can I test the amplifiers alone ... !?
Thank you.
Thx Alex, your The BOMB!
Super helpful! Thanks a bunch!!
What happens if you don't install the old amplifier?
You'll get power from your radio but you won't get any sound
Great video Alex!
What type of bolt did you use for the amp
Great replacement video!
Hey how you doing my question is what about the rear does the rear speakers have amps on them?
Great Video - Thanks
Nice video, going to try it soon
Hope everything works out for you
Hi, I noticed you are using coaxial speakers, did you have to disconnect the tweeter speakers in the dash?
well done, good diy video
thank you for this
Como consigo las baces para las bocinas ?? Donde
How did the 4ohm speakers sound? The factory are 2ohm,right?
Do they all have those amplifiers or it was an optional?
What size screws did you use to mount the infinity amps to the door ?
Mine did not come with a factory amp, just the oem jeep speakers. I've been rewiring it for the last 2 weeks after a shop messed it up. Is there an easy way to hook new speakers up by feeding wires into the door, or is it just a pain?
What kind of screw did you use to mount the amp
Did you ever figure that part out?
Sorry for the late reply I’m not too sure what size they are I used what I had in the garage but if your try homedepo they might have a size that will fit,
Marcos I just followed Alex's video and I used 10-24 x 1 1/2" long bolts and they worked perfectly.
I believe the original Jeep speakers are 2 ohms (at least mine are) and the speakers you replaces yours with are 4, have you run into any problems surrounding the difference in ohms?
I haven’t ran into any problems with the speakers, they sounds good and they still work.
Thank you for watching
Do you know if it would make any difference if you bypass/removed the factory amps rather than use them to power the speakers? Wasn't sure if it's worth the hassle of figuring out how to do the bypass.
Also, is there any reason why you went with those model of speakers and did you only replace the front speakers?
I'm planning on replacing my speakers and stereo in my 06 but I wasn't sure on how to go about doing it. Thanks!
I replaced both front and rear, I went with these speakers because they were mid ranger speakers for the price, you could bypass the amp it would be a lot more work it might make a slight bit of difference if you bypass the amp instead of keeping it but I’m not too sure
What’s the width and length of the bolts you used?
Where did you get the mounting plate for the speaker. Bc i just changed one of my sisters speakers. And i had to use flashing bc the speaker was to small. Would be so much easier when i change the other one if I had one.
Ricky Erwin I got them off of amazon there is a link for them in the description
You should’ve showed us how to get the door latch off
Where do I find the adapter for the speakers
Nelson Chacon I got them from amazon, there is a link for them in the description.
how do you remove the latch??
I have an 03 Liberty, looking at the same kfc-1666s kenwoods as well. Worth upgrading from factory speakers?
I think they are a little better then the factory speakers
I got all my speakers comnect and the left side and back are in and out wit the sound but the right front plays perfect can you help me
How are the wire connections, is a wire lose or are they all good and tight?
esta muy bien la adaptacion pero CUIDADO el stereo no debe estar amplificado. el original de jeep no esta amplificado pues tiene los aplificadores en las puertas delanteras
el 90 %de los nuevos stereos estan amplificados .y si los colocamos con los amplificadores de las puertas .reduciremos la vida util del equipo y el sonido no es bueno.
Hey Alex did you have to buy the mounting brackets for the speakers separately if so where did you find them? All the speakers I find bolt directly to the door but I think it looks a lot cleaner with the mounting bracket.
I found mine on Amazon
Hi I have a Jeep Liberty and I bought 6.5 door speakers but didn’t get speaker brackets for the door I need 4 where did you get yours. From where
I bought my from Amazon, linked in the description, Thank you
What's the power output of each of the speaker amps? Might have sounded better using the headunits internal amp. Factory amps aren't known for their sound quality. Plus, while you were in there, should have added some sound deadening/dampening material. That probably would have made the biggest difference in sound quality. Thanks for the video though. Will come in handy soon.
thanks
Hope you enjoyed, Thanks for watching
Can you use Butt connectors instead of soldering
Albert Prislac yes you can, it might be a little more work but it is possible, just make sure you have a water tight seal around the butt connections
Thank you for the comment and watching my video
@@alexautomotive28 Another question. I'm about to change my speakers in my Liberty so I've been studying your video haha, why didn't you just connect the amp to the speaker directly? Thanks!
Albert Prislac I would have but the amp won’t fit on the speaker I got so I added it to the door
@@alexautomotive28 got it thanks man and thanks for the fast reply!
@@alexautomotive28 sorry to bug again. What size screw did you use to mount the amp to the door? Thanks!
I haven't done this mod yet but plan to. Anyways, Alex I fucking love you for making this!!! I know my job is going to be much easier.
Also, how much louder / better sounding are the speakers you used for this install? The speakers I have are 2 ohm 92db w/m sensitivity as opposed to your 4 ohm 92db w/m ones.
Only asking because the stock system doesn't get nearly as loud as I want so I'm assuming it's sensitivity is much lower. My thinking is if the speakers you installed get plenty loud, then my 2ohm ones should be even louder
They do get a little louder then the factor speakers Thank you for watching
what is SORDER ! solder is pronounced as its spelt ! sold er and put it all together its solder ! simples, you dont delete the L and put a R in its place...
I’m sorry you don’t like they way I say solder, but I hope you enjoyed the video, please like and subscribe!
What a condescending little snot you are...
Solder is a modern spelling of the Middle English sawder/soudre, which derives from the Old French "soudeur", which itself comes from the Latin "solidare". In the 15th century there was a movement to re-latinize the spelling of words, and the "l" got added back in to the spelling, although the pronunciation didn't change to include the "l" until sometime later. Regarding the dropping of the "l" from the original Latin, that was common in Old French, and is why we say, for example, the word "powder" instead of "pulder".
Genius! 👍
What size bolt did you use