Borut? Really?? Wow, thank you! :) However, I read the 0.30mm distance on the manual on your site and do exactly what mean there. (I blown a fuse some time ago with original pickup position, bike won't rev up)
Hai una SIGNORA MOTO! La mia non è preparata come la tua ma tira dai :) volevo chiederti una cosa... Ho le michelin pilot power street... Ho 1. 3cm per parte circa dietro e altrettanti davanti... Quando ancora posso scendere? Tengono secondo te? Hanno molti tagli quindi non so... A parere tuo?
Ciao, secondo me non sono gomme da farci grandi pieghe, io non riuscivo neanche a mettere giù il ginocchio con quelle, le avevo su un po' di anni fa...
Set a static curve, 15° on all points, then set 32° for "static angle". So look at the degrees on the flywheel with the lamp, you'll see 15° if the "static angle" is right. Otherwise anticipate or posticipate the static angle. If it's all good then charge up the final map BTW normally the static angle is 32°, so if you wanna set it quick set it to 32°
Is this the case with every zeeltronic CDI or just yours, im asking because mine won't rev past 12 k rpm since i installed it and everything is set right, the only thing i can think of is either incorrect static angle displaying in the program or it could be wrong pneumatic powervalve setting.
I miei complimenti, finalmente qualcuno che puo' spiegare realmente tutto sto' gran bordello in 6 passi hahahaha COMPLIMENTI!
+Davide Catalano Grazie mille! :)
Nice work...it is not necessary to move pickup closer, unless CDI does not read revs.
Borut? Really?? Wow, thank you! :)
However, I read the 0.30mm distance on the manual on your site and do exactly what mean there.
(I blown a fuse some time ago with original pickup position, bike won't rev up)
Do you have any guides as to how you fitted the steering damper? I'm going to be doing the same and would love to see how you done it, thanks
danmoorestoned For the lateral steering damper you have to make a hole in the frame
@@thomas_coast top ride that rs125 v r6 still good to watch all these years later
Hai una SIGNORA MOTO! La mia non è preparata come la tua ma tira dai :) volevo chiederti una cosa... Ho le michelin pilot power street... Ho 1. 3cm per parte circa dietro e altrettanti davanti... Quando ancora posso scendere? Tengono secondo te? Hanno molti tagli quindi non so... A parere tuo?
Ciao, secondo me non sono gomme da farci grandi pieghe, io non riuscivo neanche a mettere giù il ginocchio con quelle, le avevo su un po' di anni fa...
Azz... Ecco... Immaginavo... Comunque posso scendere ancora secondo te? 1.5cm per parte circa ho ancora
Mr. Costa What commpresion ratio are you running ? And how much octan fuel are you using ? 95/98/100/102/110 ???
what mapa are you using?
I got a programmable cdi for a racing aprilia rs 125. Which map are you using?
What size is your needle
good work
+greggasto Thank you!
So you want to have it always at 15 degrees? You need to compensate right?
Set a static curve, 15° on all points, then set 32° for "static angle". So look at the degrees on the flywheel with the lamp, you'll see 15° if the "static angle" is right. Otherwise anticipate or posticipate the static angle.
If it's all good then charge up the final map
BTW normally the static angle is 32°, so if you wanna set it quick set it to 32°
@@thomas_coast Thanks! did you import a map or did you create your own?
Is this the case with every zeeltronic CDI or just yours, im asking because mine won't rev past 12 k rpm since i installed it and everything is set right, the only thing i can think of is either incorrect static angle displaying in the program or it could be wrong pneumatic powervalve setting.
What static angle did you set? Also try some powervalve spring settings
I have set it to 36°
Set 32
Okay, i will try that
How did it work ?
Quanta potenza ti ha dato la zeeltronic in piu ? hai una prova a banco?
Ti dà un po' di cavalli se mappata bene, comunque no mai bancata ancora