RapidFire Pro-L Kiln
HTML-код
- Опубликовано: 20 авг 2019
- Buy it here: tinyurl.com/y5zsy8r2
The RapidFire Pro-L Kiln offers the ultimate combination of portability, function, and performance demanded by professional artists, at a fraction of the cost of comparative products.
This furnace is the ideal solution for jewelry making, precious metal clay firing, ceramics, glaze testing, enameling, glass fusing, and more!
It comes complete with a digital control panel, an embedded heating element, a 6" tall x 5" deep x 6" firing chamber, 1500 watts of power, plus a wide opening door.
At just 12 lbs, it's light enough to take with you on the go. And, with RapidHeat technology, this kiln quickly heats up 2200°F in as little as 8 to 10 minutes.
This furnace will help you manage both time and costs; therefore ensuring that you can focus more on your projects.
*Please note that due to the nature of raw steel under extreme temperatures, the steel surface will experience tempering and coloration changes over time.
Also includes a manual, technical support, and a limited 90-day manufacturer's warranty. RapidFire kilns are also available with programmable ramping controllers. Made in the U.S.A.
WARNING: Not intended for use with wax burnout procedures. Please see part #'s: FUR-0155 or FUR-0156 for more information.
Additional Features & Specifications:
• Outside Dimensions: 8" x 7" x 13" (width x diameter x height).
• Firing Chamber Dimensions: 6" x 5" x 6" (width x diameter x height).
• Product Weight: 12 Lbs.
• Maximum Heating Temperature: 2200°F (1205°C).
• Power: 1500 watts with a standard 15 Amp circuit.
• Coiled Type Resistance Wire.
• Controller Type: Digital.
#PMCSupplies #RapidFirePro #TabletopFurnace
©PMC Supplies, LLC 
Хобби
What would be a standard bisque fire schedule for beads on the Rapidfire Pro kiln?
I really would like to purchase one and am thinking about it! Will this furnace ignite into flames? Very iffy on buying kilns (very new to ceramics) and am not sure....
I need this
Buy it here: tinyurl.com/y5zsy8r2
Are there any odors of fumes during firing of any of the metal clays?
Mines blink the light on the left of the numbers witch states out....how do i set the board to tu4n on with the right AL light ready???
When programing my burnout kiln, I put a zero in the rate of rise for one of the steps. It looks like '0' is used by the programming as a hold. Can you confirm that?
I just bought this Kiln, why can’t it be used for wax & resin burn out ?
Does it have metric settings?
Hello, May I ask if I can use a graphite crucible and melt metal in this? Thank you
You may but please cover your crucible during this process to avoid harming the heating elements.
Does anyone know if this comes with a shelving kit? And if so, what size? just bought one and im trying to find out ._.
P.S. please answer thanks!
What is the name of this oven?
Hi there, I love this product and am very interested in buying one.
The lady in the video said "RapidFire Kilns are not suitable for wax or resin burnouts, but we do offer upgraded versions of these kilns for that purpose".
Can you please direct me to which models/versions she is referring to?
Thank you.
Hello! We do offer furnaces that are Hi-Temp Burnout Oven Kilns that are designed with a pre-drilled vent hole for wax burnouts, etc. They can be found on our website here:
pmcsupplies.com/catalogsearch/result?cat=0&q=Hi-Temp
Best,
PMC Supplies Staff
Dear Abdulrahman, Please see - pmcsupplies.com/programmable-tabletop-hi-temp-2200-f-electric-burnout-oven-kiln-for-3d-pla-resin-and-carvable-wax.html
I bought the wrong one smh.
@@merakikoijewelry9977 I think the only difference is a hole drilled on top for fumes?
TAHTS WHAT it looks like really when I look at it @@travers114
Would this be good for firing plain old clay pottery projects? I am an absolute beginner with pottery and I wanted to make an informed purchase. Sorry if this is a silly question. Thank you in advance!
Hello, Benny! I will check with our furnace technician about your inquiry and let you know if this is suitable for that. Thanks!
@@Pmcsupplies okay thank you!
@@benhtml They will work well for most small pottery applications! Please let us know if you have any additional questions.
@@benhtml you're welcome!
I have the manual one with the whole in the top. It’s been a year and I can’t find any help on how to use it with lost wax casting. I have no clue of when to change the temp and how to use the buttons since it isn’t programmable. The only successful thing I completed was the Initial burnout from the paper instructions that came with it.
Any guidance would be great… or where I can find instructions to print out.
same here!
Is the fan just always running ? I don't see a switch for it
Dear Jessica, Yes the fan is always on. This keeps the electrical components cool during operation.
had their equipment before
can you set temp and set a time for it to heat? i need it to heat for 3 hours then shut off.
Hi Steve, This version is not set up with a programmable controller however, we do have a version that allows you to set a temp and time which will automatically shut off. Please see - pmcsupplies.com/tabletop-rapidfire-pro-lp-programmable-furnace-stainless-steel.html
Thank you!
Hi. I live in Europe and I want to order this on Amazon. Does it come with the power cable for European ?ty
Hello, You can use a power convertor to run this in Europe. Thanks!
If I can heat treat knife you got my money
I am trying toknowwhat temperature put to fire glazed ceramic jewelry but nobody says it .I have this kiln
Hi! Did you get it to work? How do you like it?
Every clay has a different temperature. The package of clay should say what cone or temperature to fire.
Mine reads “EEEE” what does that mean?
Hello Lucky, Your thermocouple or temperature probe is not reading back to the controller. You can check if your wires are well connected. If you need further assistance please feel free to contact us. 855-298-7627
Hello you cannot burnout wax with this?
Hello Tince, This model is not suitable for burning out wax however, Tabletop Furnace Company made two versions that allow you to burnout wax. Please see the attached link for the models that are attended for this application - pmcsupplies.com/catalogsearch/result?cat=0&q=hi+temp+oven
In the description in the link it says it’s useable for carvable wax
@@tincewilson9451 FOR 3D PLA/RESIN, AND CARVABLE WAX
uesless video. it doesn't show how to "set" the temp. every time i go to use it and try to set temp, it just keeps heating up well past the setting I put in.
I am having the same problem - did you ever find a solution?
Is there a bigger version of this shit ?