Wangan Midnight Maximum Tune 3 (TeknoParrot UI 1.0.0.794)
HTML-код
- Опубликовано: 7 сен 2024
- Partida de test a este juego de TeknoParrot que se encuentra a fecha de este video jugable si eres Patreon, no pude introducir correctamente mi nombre en la tarjeta, se descontrolo al momento de introducir el nombre, será cosa de mi control pad? si alguien tiene el mismo problema que me lo haga saber en comentarios si es tan amable :)
How do you slow the game down because when I launched it it was sped up and I couldn’t play it properly
I myself have been playing wmmt for more than 10 years (since 2010, wmmt3dx+ era) but have not tried it at all through the Teknoparrot emulator. It's not bad, can make card data through the emulator 😅😁. I've tried downloading Teknoparrot but have never tried installing the game because I'm just curious about the emulator
Greetings from Indonesia 🇮🇩
great, in my country we didn't know the wangan Midnight saga and thanks to Teknoparrot now I can enjoy them, wmmt 3 and 5dx+ are my favorites, hoping that one day 3dx+ will be emulated...
@@curru623 By the way, you play with Keyboard Button ?
@@AlexanderAgungWirabumi game with xbox one controller pad
@@curru623 Ok 👍
Where do you come from ?
@@AlexanderAgungWirabumi I am from Spain
How to setup YACardEmu? Setting it up is very complicated.
rename the config.ini.sample
to config.ini then go to config.ini
using notepad, then delete all the words from there
then copy and paste this on the config.ini file:
[config]
apiport = 8080
; basepath MUST end in a trailing slash!
basepath = ./
serialpath = \\.\pipe\YACardEmu
targetdevice = S31R
;
; Optional
;
autoselectedcard = card.bin
after you paste that, open yacardemu application
note:you must open the yacardemu application first before launching the game
thank you bro,it worked
@@OfficialNoob94
example:
[config]
apiport = 8080
; basepath MUST end in a trailing slash!
basepath = E:\WMM3SAVE.\
serialpath = COM3
serialpath = \\.\pipe\YACardEmu
;
; Optional
;
autoselectedcard = card.bin
targetdevice = S31R
hey, can you make a video how to set up yacard emu??
@@Withrz64 It is not complicated to configure, on the Teknoparrot website you have the example of how to do it...look for the game.
just copy and paste the setup op shared in the other answers
It's quite frustrating when I got the error E51. I've tried and I didn't do the steps properly after following the instructions... I can't disable the card reader option as the game didn't let me enter the test menu.
Hi How Do You Make It Full-screen Or Make It 4:3 It Is Only Windowed Mode??
How to solve the problem of incorrect card position when inserted?
you will have yacardemu configured incorrectly, check your configuration.
i already set up and why i cant play it
and only show bandai namco logo and other logo
@@BigBoss88-zl1kk For Intel video cards you need a patch, I don't know if you have Intel...
@@curru623 also why the steering wheel not working tho
update: nevermind i fixed it all
@@BigBoss88-zl1kk Are you using the yacardemu card emulator? You have to start yacardemu first and then the game... that may be the problem.
how do you play wmmt3 using the card did you download the file or use another device?
Hello, visit the Teknoparrot website....
teknogods.github.io/compatibility/WMMT3.htm
OK, thank you, but can this file use Wangan cards?@@curru623
What is the next step after changing the contents of the config.ini file? Should I put the Yacardemu file in the wmmt3 or teknoparrot folder?
You can place the yacardemu card emulator wherever you want on your computer... I have it on my c:/yacardemu drive, but you can place it wherever you want, before running the game with Teknoparrot, run yacardemu to have the emulation of the card...
@@curru623 Thank you for the tips, but how do I install yarcademu.exe, because I don't have that file
What should I do after changing the contents of the notes in this example, do I have to open the browser to enter the card or is there another way?
@@butrex2 You can enter the card with the button assigned to your control pad, the one you have chosen in the control options in Teknoparrot... using the browser to enter the card is optional... you can enter from the control pad or browser, as you see fit. like...
Thank you for the video.
Can I get your advice how to set up the config.ini file for YACardEmu before I launch the game, specifically the base path and serial path part?
Thank you.
Hello, on the Teknoparrot page you have the information on what you have to do.
teknogods.github.io/compatibility/WMMT3.htm
@@curru623 Thank you very much
Hello I set up my controller on teknoparrot but in the game the controller doesn't work, any solutions? Thanks :)
@@kilianmilou Hello, look here, in questions, you have to edit that file....
teknoparrot.com/wiki/compatibility/WMMT3.htm
How do I get the game
Sorry friend you will have to ask the friend google, knows everything, but you can consult a website called emuline, you will find information about this.
@@curru623 I can’t find it, can you provide a link please
@@curru623 Yea the website is dead and no longer exist so it kills a major part of game dumps sadly
@@xasumiji try teknoparrot.link.free
@@curru623there's a typo or we need to used vpn?
Can I transfer save data from a wmmt3 card to wmmt3dx+?
@@NicDewbm yes, you can do it
@@curru623 thanks
@@curru623 But can I pay 5$ patreon to play wmmt3dx+?
@CURRU
CURRU Hi I have WMMT3 and run it with no problem , but when I reset PC , my card id report E58 error , need to start from over, how to fix that, I wanna use a card I started In the beginning .
Hello, the error may be that the save file, the card.bin, is not created correctly... I am not an expert in solutions, check your save folder, try deleting the card.bin that you have and creating a new card. ..make backup copies of your files just in case.
Test when you get the error screen, go back to the test menu and go back in... sometimes the problems are solved like this:)
thanks I figure out with Yepemule and rename the card ini file name ,change through the web browser , and it is ok now, plus I can have Muti cars with this method @@curru623
Is there a public discord link?
which discord do you want to go to? to that of Teknoparrot?
@@curru623 Wmmt 3 sir I want to play it
@@ahirutachibana5201 You will find the game on archive.org and to play it you have to be a Teknoparrot patreon, visit the teknoparrot page and look at the compatibility list, there it tells you what you have to do.
@@curru623 Is there really no discord service for tutorials or installing games?
@@ahirutachibana5201 Visit this page, here you will find information...
www.emuline.org/topic/798-arcade-pc-wangan-midnight-maximum-tune-3-all-versions-namco-n2/#comment-12538
Can i get a free teknoparrot patreon key? cuz i have the game file and the teknoparrot emulator but i dont have a teknoparrot patreon key
If you want to play it and pay for your Patreon key, there is no other way.
Does the car save on its own or do you need a terminal app thing
@@DonutLord220 you need yacardemu to save your progress
I have a question, what if I use my winlator, which is a PC emulator for Android, and use it to emulate teknoparrot, so I can play this game? Just a speculation though
Well, I don't know, for that you would have to take the test, and to play it with Teknoparrot you first need to pay a subscription to be able to play this game.
Damn, no thanks I'm not gonna pay a teknoparrot subscrition
@@IamcountachYT You can play for free without Teknoparrot in 3dx+ but you need to have Linux, thanks to the brogamer launcher.
@@curru623 yeah no thanks, I'm bad at programming
@@curru623This aged well. WMMT3 is now available for non patreon users.
Wow!! Does it work if I have a Ryzen CPU and a Radeon card???
@@tebin According to the Teknoparrot compatibility website, it works on AMD and Nvidia...
How to fix invalid target device error in Yacardemu
I assume you are using the wrong save destination, check your configuration file.
hi,how to setup yacard emu for wmmt3?????
@@mameeirwan3631 YACardEmu
-------------
github.com/GXTX/YACardEmu
YaCardEmu configuration
---------------------------
Extract archive somewhere and copy "config.ini.sample" to "config.ini"
Open "config.ini" to make following edits
Edit "basepath =" and set to wherever you want to save your card data. basepath MUST end in a trailing slash!
Edit "serialpath =" to "serialpath = \\.\pipe\YACardEmu"
Card can be inserted through any web browser, just access via the IP of whatever machine is running the emulator. (ie. 192.168.1.2:8080) or by pressing whatever key you have bound to swipe card in TPUI.
Sample config.ini file:
[config]
apiport = 8080
; basepath MUST end in a trailing slash!
basepath = ./
serialpath = \\.\pipe\YACardEmu
targetdevice = S31R
;
; Optional
;
autoselectedcard = card.bin
@@curru623 How to fix unable to open config ini???
@@mameeirwan3631 Can't you open the file with notepad++ and edit it?
Is it possible to run 3dx?
hello, at the moment it is not possible, we are waiting for several months now, there is no news that they will add it to Teknoparrot soon, I am also waiting for 3dx and 3dx+
@@curru623 i just want to drive Evo X, but the regular version of wmmt3 doesn’t have it
This aged well. WMMT3DX+ is now on Teknoparrot, however it's patreon only.
@@OfficialNoob94 Yes, it's available now, I'm already playing it.
Do keyboard controls work?
worked.
Where did you get the game?
@@millosukasusumilo6979 look at people's comments...
@@curru623 too lazy but you say so
haha, of course it's easier to get there and have it given to you right away.... try searching archive.org for maxi3 roms.
@@curru623 where can i get the teknoparrot apk?
@@curru623 i dont have the right teknoparrot version for wmmt3dx+
Where to download please??
@@TheCodr9 search archive.org for maxi3 roms.
@@curru623 thank you
Как игру запустить?
привет, вы должны быть на патреоне, чтобы иметь возможность играть в нее, посетите страницу Teknoparrot, там вы найдете информацию, у вас есть ссылка в комментариях ...
Why Could We Agree This...
hey, did u know why i cant find the game exe? may u can help me....
It does not have .exe, the executable is called "main", you can only run with Teknoparrot being patreon.
@@curru623 UPDATE!!
WMMT3 is now available for non patreon users.
@@OfficialNoob94 where we can download it?
@@curru623 where? there is only a .dec file
@@Zeg-eh5ik open with 7zip for example to extract....