Motorized Snow Vehicle - Build
HTML-код
- Опубликовано: 1 фев 2023
- Winter in Poland, and especially in our regions (Bieszczady Mountains) can be burdensome, so we decided to make a vehicle that will be able to move on snow.
Please bear with us, because we don't have much experience in building vehicles and we couldn't predict everything.
We used the basic elements from the ATV 125.
The engine is with an automatic gearbox and unfortunately it is a bit weak as you can see in the video. Top speed is no more than 50 km/h, 30 mph.
The skis are made of stainless steel, so they should last a long time.
If you have any questions, ask them in the comments, we will try to answer them.
Check out our other constructions
• Homemade Snow Plow fro... - Homemade Snow Plow from Scrap
• Making steel sheet Rol... - Making steel sheet Roller Bender machine
• How to Make Firewood C... - How to Make Firewood Cutting Machine DIY
• Branches will Never be... - Branches will Never be a Problem again - Wood Chipper build
• No More Trailer Woes: ... - This Amazing Vehicle will make Your life so much Easier...
Nice Snow Scooter . Now add a front wheel for year round Fun.
Having a heat wave in Australia at the moment. This is just what I needed!
Skidoo and snow plough all rolled into one 👍👏👏👏
Pretty cool. I think I would change a couple of things and add a set of skis on the front much wider than the unit. Then I would remove the side skis and put in a set of foot rests much higher open or enclosed. A set of brakes on the rear tires and you are golden. Also homemade ski need to have the ribbed thing going down the middle that helps skis track in the snow.
"Sure thing boss, lemmie just whip up this custom chasis right quick 🫡. Wont take but a hour therebouts" nice work my man 🤙
Привет! Классный аппарат! Ты Очень достойный Человек этой планеты! Молодец! Мир с тобой становится интересным
Колхозник....
Good job,but it needs a carbide runner going down the center of the front ski to keep it tracking and steering straight, it will stop the front from drifting
Your skills are very impressive! Most Americans your age are ignorant with manual labor and hand tools. God bless
Ha !!! That lil thing is awesome !!!!! Nice job 👍👍👍
Меня восхищают ваши идеи. Спасибо большое за ваше творчество! С большим удовольствием смотрю ваши видео.
Buen trabajo, curioso vehículo has fabricado, para echar unas risas y además puede ser útil !!
Gracias por compartir tu trabajo.
Un saludo.
Лайк в поддержку канала
Удачи тебе ✌️
Рулевая лыжа плохо слушается потому-что нужно сделать уголки по бокам лыжы,для лучшей рулежки, техника получилась отличная!-, дай бог тебе здоровья и благополучия, новых творческих успехов и хорошего настроения 👍👍👍🤓🇲🇨🤝🇷🇺🛠️⚙️🔩🔗🦾🤗🤫🤭!!!
With a added snow deflector.
Buy a set transfer punches. It sure beats the blue marker.
This is fun winter ride.
That is so freaking cool. Need to make a market on that.
Sie sind ein Meister!!! Es macht große Freude Ihnen zuzusehen!!!👍👍👍👏👏👏
I love it but think the front ski needs a stronger mount. Also if you put a piece of round steel rod on the bottom of the ski it may steer better.
I'm thinking regular sking skis cut down, or old water skis. Cheap from second hand stores and easy to replace when they wear out.
Arctic cat can eat their heart out, better quality, and at a better price as well.
Can't always make useful things, you need something fun now and then. Love the dog sled brake, sort of Fred Flintstone brakes. Also, it's not done till it'll do burnouts. 👍🏻
Just love how you bang out projects! Like others have said-a pair of dual skis set wide up front, plus better stability, and a change of foot position or simple 'spray cover'; and a rack.
Great build, thanks for sharing.
I really enjoy the style of video you make. No annoying music, no weird special effects. Just the metalworking, the machines, the material and your skill. Keep up the great work
👍
And thanks for changing back the clickbait title
*Well done* as always. Enjoy your new winter time toy! God bless.
Мав Пан час, мав Пан натхнення. Хороша забавка.
Your talent is unreal
hahah sneaky medeaky scooter action. Love it.
This is a really nice ski vehicle. Might be useful in winter.
Excellent work 👍👍👍 . Thank you for sharing. Take care of yourselves 🇨🇦
Great job, easily adapted to use front we wheel in summer...from so cal 👍👍
I am just over 100 Kilograms, which, you look about my size, I wondered how well it would work, but it really moves! Super build! Love the attention to detail, especially the brake!
Good job mister well done
Needs carbides on the ski, so u can steer. Cool project!
Молодец! Хороший снегокат получился.👍
Looks like something "Make it Extreme" would build as well. Wonderful work!
You may also need to find a color you like and paint all the stuff you made with it.
Your angle grinder skills are impressive!
Hehe, Ty się widzę nudzisz. Fajny skuter wyszedł. Brawo.
Great build Stasio!
Outstanding project! I am never amazed by how you can use readily available off the shelf items to create such very and useful vehicles. Keep up the great work!!!
Very cool machine! 😀👍
Wonderful job, as always. Congratulations!
My congratulations!
Снегоходы делают на гусеничном ходу, чтобы увеличить пятно контакта привода с поверхностью. Таратайка этого пшеха будет буксовать на каждом пригорке. Кроме этого, звенья цепи расположены слишком близко и будут тереться друг об друга, пока цепь не порвется совсем. За трудолюбие 5, за конструкцию 3- .
Podziwiam za pomysły.. oraz za wykonanie wszystkich wszelakich sprzętów 👍
Avesome project 👍🏻👍🏻👍🏻
Damn. This thing has more steel on it than a car
Love the idea! Respect from Oklahoma, USA
Add a keel to the bottom of the skis, you'll have better control.
Otherwise, looks like fun.
Nice build.
This guy makes some really cool stuff. I really like this channel.
Great video well done
Really cool and lots of fun.
"Fach w rynku"
"noo, to ja robiłem"
pozdro👍
MM77 Approved 👍🏼👍🏼………………….WAY COOL!!!
That's fantastic!
Fantastic job!
Good design and manufacturing! Well done! Be Safe!
I do love your DIY you never end 😊
Jesteś bardzo pozytywnym człowiekiem;) super robota
Neat little machine, very cool
Luks pojazd Darek, pożyteczny i do zabawy świetny. Pozdrawiam
Darek buduje tak solidnie, że żadna z tych rzeczy nie nadaje się do masowej produkcji, po prostu była by za droga.
Fantastic work, dude! That was just amazing! 😃
Really well done! It seems like a heck of a fun! 😂
Stay safe there with your family! 🖖😊
Cool build Godbless
Lindo trabalho.. uma bela obra de arte eu achei o projeto sensacional parabéns.. guerreiro
Wyższe płozy musisz zrobić a tak to luxus robota !
OK Awesome build going to try and make this with wheel in front cause so hard to get around the farm this wood help alot to get around so ya got my vote thks for sharing your project with us keep making projects like this makes us Old guys still get around lm 65 and like to be outside alot even though my legs and feet don't got bad heart too so ya make it look easy so keep ya posted just looking for motor and will be able to start building this it's little chilly here minus 35 in Canada SK 🇨🇦 brrr stay warm
Jak zwykle pomysł na miarę potrzeby chwili 😁👍
Good work
Наверное, скоро личный самолет , сделанный в домашних условиях, увидим.
Great build
Very creative.
Awesome build
Awesome design, dude. It's a super solid model. It's a great idea. But if you used a pillow block bearing and
Staring rod handling flange
Type bearing is used in these bearings. The house is not completely metal light duty. next time, the metal body will be used. I hope my suggestions are useful, sir. Thank you so much, sir, for sharing the wonderful video, sir.
Cool project. How about one with a snowmobile track.
Inspiracja do budowy pewnie był Wazzup ze swoim gokartem z rusztowania ;)
Niestety nie mam na tyle rusztowania 😁 widziałem tylko urywki, ale konstrukcje delikatnie podobne 🙂
Классно получилось ))
So funny, but so awesome. 👍
Well just A++++ on this one.
Another great video your work is amazing well done
Very neat! I think the snow is too wet from the looks of it. Colder, powder snow, I bet this would do great!
Take my money!
Genial, muito bem criativo!!!🤌👏😃
You should make the back of the skis curl up to for when you are backing off
Outstanding Bro!!!
But I have to say that You must wear a motorcycle helmet for your safety
Fantastyczna robota.
Nice 👍!
Haha looks fun, great build bro!
Mad but fun, like all good ideas.
How always. I press like.
Awesome!
Nice idea and execution .I hope you may improve your sleds a bit and enjoy it even more.
Great job!
But the front ski will not steer good.
The front "steering ski" is either flat and wide for deep snow, or long and thing for speed. And the blade needs to be
You need to add a V-shape so that it digs into the snow and "bites" betteré
A Good way is to take a small peice of angle iron and weld it onto the base of the ski
It's also worth adding a handle to the front ski when you get stuck and need to pull it out of the snow.
The 2 side skis are a good idea since you're using wheels but the snow that gets accumulated under means too much weight is up front or near the center of the bike.
Move the skis back towards the wheels and add foot rest instead, like a motorcycle.
Try pattering the curve of your skis after real skis with more of a gentle curve at the front.
Also think about adding a down facing ridge on the sides of steering ski. this will help to lift up the front and help with steering.
Ficou top 👍👍
Haha nice work.
You need a plow on the front like 1/2" above the ground level, just to smooth it out for everyone behind you, and to keep your feet from getting snowy. Plus, it'd just look cool. You could even just make it out of plastic.
Am your fan bro... from India, tamilnadu, Chennai....i like yours video and ideas 👍👍👍👍💐💐💐
Pomysł spoczko, chociaż ja troszkę bym bardziej rozstawił koła wtedy dupa nie tańcowałaby tak mocno. Noski płóz pod nogami uformował tak, żeby odrzucały śnieg na zewnątrz, a przednią zrobił nieco dłuższą i zawiesił na zwrotnicy tak by trzymała płaszczyznę gruntu przy skręcie... ale to ja jako "konstruktor". Jako widz powiedziałbym "złaź i daj się przejechać" :D fajny czasoumilacz z tego wehikułu XD
Very nice vehicle and build! I just suggest bigger skates and mainly an engine with more power. Have you think about a 2-stroke engine for this application? With more power and less weight should work better!
Cool idea 😅👏
that's awesome
Przejazd testowy w okolicach ZST 👍