Lidl - Mistral Paddleboard - Unboxing - Overview - and ULTIMATE setup guide! LIDL SUP
HTML-код
- Опубликовано: 15 июн 2024
- What started out as an overview of the board has now become the ultimate setup guide!
The Lidl / Mistral 10' 6" paddleboard guide and overview.
If you would like to support my channel then head on over to:
ko-fi.com/dreadysays
To make a small donation to help me upgrade my kit and acquire more gear to review. Спорт
Thanks for this Video. Very useful. I didn’t know about a couple things. I just bought it yesterday and I’m so happy with that.
Glad it could help, enjoy the board bud.
Thanks, great review of the board and how to set up. A video reference is always soooo useful. Saves so much time and much clearer compared with trying to get everything from the instructions.
Hey bud, glad it helped. Great board for the money, you'll get your a few years out of it if you look after it.
One thing I discovered accidentally, that once the outer chamber was fully inflated, all you need to do is to press the button for the 2nd chamber down and the vacuum action created will get quite a bit of air in there. Saves a few pushes on the manual pump.
That's interesting; I didn't notice that either. Doesn't that take the pressure from the other chamber though? I've since given that board away so I don't have one to test it on anymore.
Thanks a lot for the video!
Really interesting review of latest lidl minstral board as I haven't had time to unpack ours yet. Looking forward to the on the water review but I appreciate you have to work on editing it as well.
Hey there, it's now live and was so much fun to film :) Check it out.
Thanks great information: I have lost 2 paddies previously, is there a leash to attach that you can recommend?
I wouldn't personally recommend using a leash on a paddle as they do float, however you can buy them on Amazon I believe.
You said at 9.30 that you only have to put 7 and a half in each (chamber). Surely you inflate both chambers to 15psi?
So I did, that was an error thanks for bringing that up, I may see if I can edit that bit out or pull the video and put out a new one.
Was a busy week of reviews that week :) I think it was a presumption until I actually inflated it as it's written on the valve the correct pressure.
@@Dreadysays thanks for confirming that. I inflated mine yesterday and, having seen your vid (excellent BTW!) I was worried I was overinflating! 😁
@@MsDeepblue2 No worries at all, a really bad error that one, I think at that point I was presuming it was 7.5 in each then didn't correct myself. Going to see what I can do about it now without having to pull the video.
Again, thanks for pointing that out, appreciate it.
@msdeepblue2 I've now cut that little bit out, thanks again for that, greatly appreciated. Luckily I just cut that bit out and will update in a few hours.
dreadysays@gmail.com if you have any other questions by the way, you'll get my full attention.
@@Dreadysays thanks so much!