@10:00 - Monitor Event may be a system status event (Loop Initialization, SLC Mapping, etc.) or an addressable input module programmed to produce such an event type.
@10:00 ground fault is from the 120v ground, the entire system is normally grounded by many ways, conduit to building steel that is where the grounds come from.
Hi! please i need help I have a problem with my EST quicktart every time i will retrieve the database using my laptop the error will come like this ( At least 1 SLIC card has not completed initialization. Allow all SLIC cards to complete initialization then retrieve Signature Data from the SLIC Configuration Form. Please thank you
Wait? Did I hear you correctly on how to wire the batteries. It sounded like you just connected batteries together in a total loop and not have any connection to the FACP. From FACP black wire to black connection on battery. From FACP red wire to battery red connection the a jumper between both batteries......
Mapping is one of the best features on EST panels. What it does is give you a picture of how the system is electrically wired. When you have Mapping enabled and you have a bad device you can swap it with a like device and the system will auto clear. With that said I believe the Quickstart panel is the worst addressable panel they came out with and I am glad that they have dropped it.
GOOD NIGHT, I WOULD LIKE TO TAKE YOUR DOUBTS; - HOW DO YOU CHANGE THE NAME OF THE INSTALLATION COMPANY AT CENTRAL? - CENTRAK.ESTA WITH O.BIP.DE FAKAHA DISABLED, HOW DO I REACTIVATE IT?
@10:00 - Monitor Event may be a system status event (Loop Initialization, SLC Mapping, etc.) or an addressable input module programmed to produce such an event type.
I am facing problem imcompatible database in my fire alarm panel. What is meant ? And how to solve it ?
@21:12 User Labels may be programmed from the proprietary software OR from the QS-Scan at the control unit itself (no software required).
@10:00 ground fault is from the 120v ground, the entire system is normally grounded by many ways, conduit to building steel that is where the grounds come from.
@1:00 - The transformer steps the voltage down from 120vac to 24vac (NOT 24vdc). The PS6 converts the xfmr secondary voltage to 24vfwr.
Yes that is true.
Would love to see an episode on the ms5ud or 4010. Love your content and keep it coming
I would like to see a video on how to use the quick start software.I would also like to see how to change out a defective smoke or monitor module.
Would you please explain how to replace a device in EST quick start panel. Also eleborate how to change/ add its address/ location
Hello dear, how do you write the name of a sensor from the panel???...for example, an office smoke sensor???
How do you put it in walk test
Can you make one about your Gamewell-FCI 7100?
Awesome! Would love to see one on the Simplex 4010.
What is the password to add a type change device or program
Simplex 4010 or 4100u
Hi! please i need help I have a problem with my EST quicktart every time i will retrieve the database using my laptop the error will come like this ( At least 1 SLIC card has not completed initialization. Allow all SLIC cards to complete initialization then retrieve Signature Data from the SLIC Configuration Form. Please thank you
I feel like with these panels that the less devices you use and the less you use it in general, the longer the CPU will last
Wait? Did I hear you correctly on how to wire the batteries. It sounded like you just connected batteries together in a total loop and not have any connection to the FACP. From FACP black wire to black connection on battery. From FACP red wire to battery red connection the a jumper between both batteries......
@14:29 - NOT an Ethernet port.
How to bypass AVs for a inspection ?
buenas tardes algún dato de como borrar los trouble (problema)
Do you have any zA8-2 or Zb16-4 cards you would be willing to sell
Mapping is one of the best features on EST panels. What it does is give you a picture of how the system is electrically wired. When you have Mapping enabled and you have a bad device you can swap it with a like device and the system will auto clear. With that said I believe the Quickstart panel is the worst addressable panel they came out with and I am glad that they have dropped it.
GOOD NIGHT, I WOULD LIKE TO TAKE YOUR DOUBTS; - HOW DO YOU CHANGE THE NAME OF THE INSTALLATION COMPANY AT CENTRAL? - CENTRAK.ESTA WITH O.BIP.DE FAKAHA DISABLED, HOW DO I REACTIVATE IT?
Also maybe your ifp 1000
all panels