Hope you've bought one great pistol chronos at above 350 FPS with silencer attached and 295 without for the price you can't go wrong recommend nuprol 2.0 gas for this not red gas of any kind as it's a non blowback for internal health of the pistol .
I know this is a old video but if you clean the inner barrel of the suppressor and do a little filling of the feed lips it sorts all the issues plus it’s a 16mm cw. I got a short tm Socom suppressor and it makes it even quiter
After seeing this, I honestly kind of wish I hadn't bout the SSX-23, and just gotten one of these and upgraded it. Nonetheless, great review, and I'm a big fan of yours!
@ja nee I haven't had any problem with mine, other than a couple times where the trigger locked up, and all I had to do was release the mag and trigger, then pull the trigger pack untill the hammer was cocked, then put the mag back in and it worked fine. My friend's just was constantly double feeding, but not much else was a problem
@@PheasAirsoft I'm actually very happy with mine, although I do feel that it's too expensive, but then again, he's trying to make a profit. I've had virtually no problems, but it sounds like I just got lucky
I have one with hadron tdc and maple leaf 60deg bucking and found with the inner barrel suppressor it was putting out less fps then without so I cut the suppressor in half down the central line filed it back filled it with scotch pad and glued on the original end cap blended the join and repainted it,mine sits at 320fps and with the modified silencer is 10 decibels quieter, also found the more aggressively you pulled the trigger the more fps you got
@@PheasAirsoft it goes great with my aps uar (which is in no way a uar anymore) Madbull 455mm 6.01mm barrell(rhopped) Asg cnc ultimate u3500 motor Shs swiss cheese piston Aols piston head Asg cylinder head Shs tappet plate Aols 13:1 gears Asg m105 spring Merfit 3.2 mosfet Aoe corrected Shimmed 1.5-4 scope flash killed 4.5 inch silencer(barrel cover) 8mm ceramic bearings Gearbox radius All contact areas polished inside gearbox Trigger shimmed Replica fab afg foregrip The only original parts are the air nozzle hop up and case, bought it cheap as a boneyard item
Hi, thanks for the question. When we tested it, on a moderate day (around 16 degreesC) we got two sets of bbs (56 in total) and i think maybe one or two more after that. Can't remember exactly, but it was certainly 2 full sets of 28 bbs. Hope that helps. Pheas
Just got this have to say I’m impressed but the trigger pull makes a bit of noise when it gets to about half a pull which is annoying but still a quiet gun
They can be a little clunky on the trigger pull, but like you said even with that they are still quiet. I'd change the surpressor for a normal foam filled one and I bet it's even better. Phess
It did seem to become a little less accurate, but shot alot lot further (as the surpressor has an inner barrel, watch out for the drastic fps increase from it) pheas
@@PheasAirsoft hm, mine shoots perfectly without the supressor and i cant seem to hit a target at 10m with it. I also see 2 "dots" inside the barrel extension, meaning its not totally smooth inside.
Hiya, thanks for the question. I got this from Taiwangun.com here is a direct link... www.taiwangun.com/en/gas-4/st23-non-blowback-heavy-weight-gas-pistol-stti?from=listing&campaign-id=19 Hope that helps!
Hi! Does your gun also shoot not quite straight?Like the bbs go down .Mine has the hop-up to maximum and i use 25 g bbs and the bbs do not go straight. Do i need lighter bbs? Does ur gun do the same?
Ours shot fairly straight out of the box, sounds like its either catching on something or mis-aligned hop rubber. I would suggest stripping it down and checking the alignment or looking for and fitting one of the hadron airsoft hop adjusters for the TM mk23, makes a load of difference. Pheas
For me, they are very very similar, i would save the bit og cash and go for the stti version if its available to you, especially if you are going to be putting all new parts in it as most people seem to be doing. Pheas
@@arthurmackintosh6154 Hiya, a Glock would be a good starting point, raven I have had bad experiences with of old, so I would advice WE, TM, KJW or army armament glocks to be honest, pheas
@@adamwatkin6584 Hello again. Yes they work but may malfunction as mine did. Easy fix is to file alittle the feed lips and the rubber gas router on the mag. My lips needed alot of fileling and the rubber router needed very slight ( 2-3 motions with the file ) to work. Problem was the trigger became incredibly hard to push and infact needed so much preasure you couldnt use the double action. Looked like it was hard for the BB to come out the lips and the router rubbed on the part that pushed the bbs. Anyways now it works great.
Hiya, they make excellent side arms. They are largely compatible with the TM MK23 SOCOM parts (and there are loads of them) to mess about with all the performance aspects, but even out of the box they are quiet and well performing. For £50 you can't go wrong! Also, don't forget to check out my giveaway of one of these, if you haven't already! Pheas
@@itsvxip3574 thanks for the question. In all honesty I don't know. I've never run one myself. I gear double tap designs do a holster of sorts but no idea what it's like. Likey you will need a very large generic adjustable holster as it's quite a beast. Hope they helps. Pheas
Hello! Its probably onpar with it. Both will need some mods to be the most effective they can be, both are slightly off spec from the TM one in the feed lips of the mags. Pheas
Hiya. I got this one from here: www.taiwangun.com/pistol-green-gas/st23-non-blowback-heavy-weight-gas-pistol-stti?from=listing&campaign-id=14&q=St23 And here is a link to the mags for it : www.taiwangun.com/green-gas-co2-magazine/28rd-st23-green-gas-magazine-stti?from=listing&campaign-id=14&q=St23 Hope that helps! Pheas
Hiya, out of the box expect over 30 meters of range and accuracy after that it will depend on the ammo, the barrel (if it was well made, some are hit and miss) but a couple of cheap easy upgrades and it could be an absoltue beast! Pheas
@@samnewport8369 they are in Poland so coming into the UK there were no customs, I have them put my ukara number on the front of the parcel (I put it in the order comments) and they deliver using ups, so if I order on the weekend its usually dispatched Monday or Tuesday and with me by Thursday or Friday. Really good service. Hope that helps.
ha ha ha. You are not the first to say this! A lot of them are just the recommendations of subscribers so I try to get what they would want to see! This is a great piece and dirt cheap too!. Pheas
@@PheasAirsoft you are the best airsoft RUclipsr for me.you dont say 10minutes of bullshit,you go strait to the topic.your reviews are cool,good,informative.you explain things very well.and you always reply
@@mustachk0bg998 Glad you like what I am doing! Always nice to get positive feedback. As for the links, if you dont leave a space after a full stop it thinks you are making a hyperlink! Pheas
Perfect, I've been thinking of grabbing one of these from Humber, now even more tempted!
They are very good value and offer a good platform to build on
Hope you've bought one great pistol chronos at above 350 FPS with silencer attached and 295 without for the price you can't go wrong recommend nuprol 2.0 gas for this not red gas of any kind as it's a non blowback for internal health of the pistol .
This is an awesome gun, thumbs up to you sir.
Keep making good vids for the fans
Nice unboxing! Have an amazing day friend.
I know this is a old video but if you clean the inner barrel of the suppressor and do a little filling of the feed lips it sorts all the issues plus it’s a 16mm cw. I got a short tm Socom suppressor and it makes it even quiter
After seeing this, I honestly kind of wish I hadn't bout the SSX-23, and just gotten one of these and upgraded it. Nonetheless, great review, and I'm a big fan of yours!
@ja nee yeah, my friend got his a day before me, and he's been having lots of feeding issues as well.
@ja nee I haven't had any problem with mine, other than a couple times where the trigger locked up, and all I had to do was release the mag and trigger, then pull the trigger pack untill the hammer was cocked, then put the mag back in and it worked fine. My friend's just was constantly double feeding, but not much else was a problem
Glad you liked it, are you not happy with the SSX-23?
@@PheasAirsoft I'm actually very happy with mine, although I do feel that it's too expensive, but then again, he's trying to make a profit. I've had virtually no problems, but it sounds like I just got lucky
I have one with hadron tdc and maple leaf 60deg bucking and found with the inner barrel suppressor it was putting out less fps then without so I cut the suppressor in half down the central line filed it back filled it with scotch pad and glued on the original end cap blended the join and repainted it,mine sits at 320fps and with the modified silencer is 10 decibels quieter, also found the more aggressively you pulled the trigger the more fps you got
WOW! Sounds awesome! I'll be taking a note of that set up and getting to work on mine! Pheas
@@PheasAirsoft it goes great with my aps uar (which is in no way a uar anymore)
Madbull 455mm 6.01mm barrell(rhopped)
Asg cnc ultimate u3500 motor
Shs swiss cheese piston
Aols piston head
Asg cylinder head
Shs tappet plate
Aols 13:1 gears
Asg m105 spring
Merfit 3.2 mosfet
Aoe corrected
Shimmed
1.5-4 scope flash killed
4.5 inch silencer(barrel cover)
8mm ceramic bearings
Gearbox radius
All contact areas polished inside gearbox
Trigger shimmed
Replica fab afg foregrip
The only original parts are the air nozzle hop up and case, bought it cheap as a boneyard item
How much decibel does yours have with modified silencer? Very interested in that.
My dad has had this for so long and we knew it was a knock off, but now we know what brand it was, it is completely unmarked and unbranded
glad the video could help you find out the brand! Pheas
With one gas refill how many bbs i can shoot until its empty?
Hi, thanks for the question. When we tested it, on a moderate day (around 16 degreesC) we got two sets of bbs (56 in total) and i think maybe one or two more after that. Can't remember exactly, but it was certainly 2 full sets of 28 bbs. Hope that helps. Pheas
Just got this have to say I’m impressed but the trigger pull makes a bit of noise when it gets to about half a pull which is annoying but still a quiet gun
They can be a little clunky on the trigger pull, but like you said even with that they are still quiet. I'd change the surpressor for a normal foam filled one and I bet it's even better. Phess
I must say i bought 14mm supressor for this and it doesnt fit… Im guessing the size is 16on that
Got mine today. Is it just mine, or does the accuracy drop significantly when using the supressor?
It did seem to become a little less accurate, but shot alot lot further (as the surpressor has an inner barrel, watch out for the drastic fps increase from it) pheas
@@PheasAirsoft hm, mine shoots perfectly without the supressor and i cant seem to hit a target at 10m with it. I also see 2 "dots" inside the barrel extension, meaning its not totally smooth inside.
IT Has hop up? Od yes how can i regulate IT?
Just like old times
Nice review. Can you say where you got it from?
Hiya, thanks for the question. I got this from Taiwangun.com here is a direct link... www.taiwangun.com/en/gas-4/st23-non-blowback-heavy-weight-gas-pistol-stti?from=listing&campaign-id=19
Hope that helps!
Hi! Does your gun also shoot not quite straight?Like the bbs go down .Mine has the hop-up to maximum and i use 25 g bbs and the bbs do not go straight. Do i need lighter bbs?
Does ur gun do the same?
Ours shot fairly straight out of the box, sounds like its either catching on something or mis-aligned hop rubber. I would suggest stripping it down and checking the alignment or looking for and fitting one of the hadron airsoft hop adjusters for the TM mk23, makes a load of difference. Pheas
Excuse me where did you buy this gun
Hello! Originally I got it from Taiwan Gun in Poland. Pheas
how does this compare to the asg version
For me, they are very very similar, i would save the bit og cash and go for the stti version if its available to you, especially if you are going to be putting all new parts in it as most people seem to be doing. Pheas
@@PheasAirsoft ok thanks but do you think a gob would be a better first pistol because I have been looking at the raven line
@@arthurmackintosh6154 Hiya, a Glock would be a good starting point, raven I have had bad experiences with of old, so I would advice WE, TM, KJW or army armament glocks to be honest, pheas
I wanna Buy this Gun :) its very good
It is a cracking piece of kit and the price is a bargain!
do you know of any websites where you could get a two-tone version for UK?
Patrol base,defcon1 and surplus storeuk it's also sold hfc branded and asg branded
Thanks
Will SSX 23 mags work on this ?
Hello! I believe they do / will. I am led to believe that they are made by STTi for Nov, so should be identical! Pheas
@@adamwatkin6584 Hello again. Yes they work but may malfunction as mine did. Easy fix is to file alittle the feed lips and the rubber gas router on the mag. My lips needed alot of fileling and the rubber router needed very slight ( 2-3 motions with the file ) to work. Problem was the trigger became incredibly hard to push and infact needed so much preasure you couldnt use the double action. Looked like it was hard for the BB to come out the lips and the router rubbed on the part that pushed the bbs. Anyways now it works great.
Is it worth it? I want to start airsoft but i dont know what guns to get for cheap does anyone have any reccomendations?
Would u recommend me getting this I've seen it on a site called patrol base for 50 and wondering if it's worth it
Hiya, they make excellent side arms. They are largely compatible with the TM MK23 SOCOM parts (and there are loads of them) to mess about with all the performance aspects, but even out of the box they are quiet and well performing. For £50 you can't go wrong!
Also, don't forget to check out my giveaway of one of these, if you haven't already!
Pheas
@@PheasAirsoft quick question with this pistol wat holster would i get
@@itsvxip3574 thanks for the question. In all honesty I don't know. I've never run one myself. I gear double tap designs do a holster of sorts but no idea what it's like. Likey you will need a very large generic adjustable holster as it's quite a beast. Hope they helps. Pheas
@@PheasAirsoft ok thanks I might just get a universal holster or not get one and leave my SMG in spawn and only run the pistol until I'm out of ammo
Btw is the dessert eagal bigger than this pistol?
is it better than ASG mk23?
Hello! Its probably onpar with it. Both will need some mods to be the most effective they can be, both are slightly off spec from the TM one in the feed lips of the mags. Pheas
@@PheasAirsoft Thanks for fast response!Loving your vids,continue with great reviews!
where can you buy this one mate ?
Hiya. I got this one from here:
www.taiwangun.com/pistol-green-gas/st23-non-blowback-heavy-weight-gas-pistol-stti?from=listing&campaign-id=14&q=St23
And here is a link to the mags for it :
www.taiwangun.com/green-gas-co2-magazine/28rd-st23-green-gas-magazine-stti?from=listing&campaign-id=14&q=St23
Hope that helps! Pheas
Yo how far does this shoot and stay accurate for
Hiya, out of the box expect over 30 meters of range and accuracy after that it will depend on the ammo, the barrel (if it was well made, some are hit and miss) but a couple of cheap easy upgrades and it could be an absoltue beast! Pheas
What gas do you put in it
Thanks for the question. I always use nuprol green gas. This one... www.patrolbase.co.uk/nuprol-2-0-mini-green-85g-gas
Hope that helps.
What shop did you buy this from?
Hi, thanks for the question. I got mine from Taiwangun.com
Pheas Airsoft hi, we’re there any problems regarding customs or delivery? Etc
@@samnewport8369 they are in Poland so coming into the UK there were no customs, I have them put my ukara number on the front of the parcel (I put it in the order comments) and they deliver using ups, so if I order on the weekend its usually dispatched Monday or Tuesday and with me by Thursday or Friday. Really good service. Hope that helps.
Pheas Airsoft yeah it does thanks
How do you always have reviews on what i want🙃🙃🙃
ha ha ha. You are not the first to say this! A lot of them are just the recommendations of subscribers so I try to get what they would want to see! This is a great piece and dirt cheap too!. Pheas
@@PheasAirsoft i never suggested you anything but you always do what i want howww
@@PheasAirsoft you are the best airsoft RUclipsr for me.you dont say 10minutes of bullshit,you go strait to the topic.your reviews are cool,good,informative.you explain things very well.and you always reply
@@PheasAirsoft how did i make links
@@mustachk0bg998 Glad you like what I am doing! Always nice to get positive feedback. As for the links, if you dont leave a space after a full stop it thinks you are making a hyperlink! Pheas
Is it metal?
Its all plastic externals, thats one of the main reasons its soooon cheap! Pheas
I orderd the gun and it was 420 fps
Hiya, thanks for the comment. Wow that's high. If that with the surpressor on it?
This is an awesome gun, thumbs up to you sir.