The 19-inch monitor looks dope on the KI cabinet! Visuals look so crystal clear on the monitor that I thought it was the actual KI full size arcade cabinet! Thank you for sharing this with all of us as well as the company who is providing the 19-inch monitor for the 3/4 scale arcade cabinets!
@@OverThinkGaming go to the live button and highlight back, hold right on the stick while holding a button to uninstall the patch. Let me know how it goes.
Dope!!! Thank you once again for paving the way. I was on the fence about doing the bigger monitor mod on this gen cabinet, not knowing what issues I'ma encounter but now I'm definitely doing it. Btw are your online leaderboards updating at all?
Thank you for the comment man. I really appreciate you. They should be fixing that issue I have talked to code mystics about it. Again thank you and i appreciate you.
It has a clearer look and it could be brighter if you wanted it to through the settings on the monitor. I tried to show it in the video. Thanks for checking out the video and I appreciate you.
Do you have any kind of flickering issue? I got a 2007fp monitor after some searching and replaced it, so it looks great. But I have some really bad flicker on Battletoads, and random flicker on KI2. KI1 seems to be ok during gameplay, but it flickers on the Scoreboards (in game, not in the OS). Its weird. Ive got a V2.0 board. Its definitely working but that flicker is annoying, especially if I decide to sell it down the line, I know some tirekicker is gonna complain lol
I am looking at how you have the Geekworm board connected at the 2:11 mark. Normally, the red cables indicate power and would be plugged into Pin 1 on the Geekworm board. On your configuration, looks like you have the cable reversed. So my question is in order to get this to work on KI, you have to plug in the LVDS cable the opposite way and plug into port 2 on the Geekworm board?
@@MadDadsGaming Ok...the reason I brought up because on the geekworm board, if you hold it and view with the HDMI port down, pin 1 for the LVDS would be on the right. This is where the power from the LVDS cable would normally be plugged in, which would be the red cables. However, from looking at the video, you have the LVDS power on the left side. So was just curious if in order to get KI to work with the geekworm board, you had to plug in so the power for the LVDS cable was on the left side and not the right side, which would be how it would be plugged in normally. If it works, it works...was just curious. Thanks again.
@@therealsmilebit who's to say that it's power? Anyway, I see what you mean. the LVDS ribbon from the other A1U cabs are normally on the right when using the adapter. It's possible that his is different?
@@RoTeNdO Because Pin 1 indicates where the power goes. I am not talking about the A1UP PCB. Different A1UP PCB's have the Pin 1 on the left...some on the right. I am specifically talking about the Geekworm board. If the HDMI is pointing down and you are looking directly at it, Pin 1 on each port is on the right. If you look at the cable that came with the Geekworm board, or any LVDS cable for that matter, on the black 30 pin Dupont connector that plugs into the port, there is a dot, which is usually white or red. This indicates Pin 1 and it is the power. Usually if you do not plug in correctly, can damage the board. Does not seem to be the case here and that is why I was asking about it. If it works, it works.
@@therealsmilebit Yes. That is interesting indeed. I have both the first version and 1.5v of the Geekworm LVDS to HDMI and both have the white arrow. I'm waiting for the 2.0 to get delivered so I can do some testing. I'm intrigued enough to test that out, but I don't want to damage any of my A1U pcbs.
Can you PLEASE tell me the exact model monitor you are using. 19" Brand and model. I tried everything shown on two dell 20" 2007fpb and it does not work. It does not keep a stable image. Please let me know the exact model details on the monitor. Thank you.
It should work if you have everything as shown. The only reason I say that is because people have sent me pictures of their's working do to the video. If you need anything just email me if you like? Will give the model number when i get home. It is also on my street fighter big blue mods if you don't want to wait.
So we are crystal clear on this….because this is something I’ve wanted to do with KI and T2…..after this install the machine turns on/off and runs just like it would with stock 17 inch? I’m not interested otherwise!
The Dell monitor is plugged in with the cord and the marquee is plugged into the PCB. I use the Geek Worm adapter for the rest. Thanks for checking out the video.
![FT5 @sf2hf: EG6K1N6 (US) vs Returns (BR) [Street Fighter II Hyper Fighting Fightcade] Feb 10](http://i.ytimg.com/vi/mj0X6eKzv4g/mqdefault.jpg)
Nice upgrade to the cab! Awesome work 🎉
Thanks I appreciate you checking out the video.
Another excellent mod! Great video man.
Thanks man, I appreciate you.
The 19-inch monitor looks dope on the KI cabinet! Visuals look so crystal clear on the monitor that I thought it was the actual KI full size arcade cabinet! Thank you for sharing this with all of us as well as the company who is providing the 19-inch monitor for the 3/4 scale arcade cabinets!
I appreciate you for checking out the video and the comment. Yeah it looks great man i was shocked myself lol. I appreciate you.
Damn man, screen upgrade looks awesome!! And nice gameplay too 😉
Thanks man i appreciate you for checking out the video and the comment.
Came out so clean.
Thanks man for the support I appreciate you. How is yours going?
@@MadDadsGaming I can’t update. May be something wrong with the replacement pcb. I can play the old July version. That’s about it. Lol
@@OverThinkGaming go to the live button and highlight back, hold right on the stick while holding a button to uninstall the patch. Let me know how it goes.
@@MadDadsGaming thanks dude. I was hoping that would work, it didn’t. Lol
@@MadDadsGaming didn’t work. Appreciate you though. I was crossing my finders. Lol
Wow 🤩 good job 👏 I love it 😻
Thanks man I appreciate you.
Real nice man 🤘🏼
Thanks man i appreciate you for checking out the video.
Looks good
Thanks man i appreciate you for checking it out.
That's clean cool mod. I just got Golden Tee XL and want to do a 22in monitor hopefully Tulsa Arcade do a mod for one or another company! 🤔
They should be able to man. Not sure about a 22 inch though a 20 would be good so you can keep that aspect ratio good.
dope nice pro mod
Thanks man. I appreciate you.
I think I may do this to the yoga flame I am turning into a KI thanks
Cool I appreciate you for checking out the video.
Dope!!! Thank you once again for paving the way. I was on the fence about doing the bigger monitor mod on this gen cabinet, not knowing what issues I'ma encounter but now I'm definitely doing it. Btw are your online leaderboards updating at all?
Thank you for the comment man. I really appreciate you. They should be fixing that issue I have talked to code mystics about it. Again thank you and i appreciate you.
How much was everything to upgrade? Also did you upgrade the buttons?
Its about 150 bucks or so to upgrade. I haven't upgraded my sticks at all yet. I appreciate you for checking out the video.
Man is the new monitor brighter and have a cleaner look?
It has a clearer look and it could be brighter if you wanted it to through the settings on the monitor. I tried to show it in the video. Thanks for checking out the video and I appreciate you.
Do you have any kind of flickering issue? I got a 2007fp monitor after some searching and replaced it, so it looks great. But I have some really bad flicker on Battletoads, and random flicker on KI2. KI1 seems to be ok during gameplay, but it flickers on the Scoreboards (in game, not in the OS). Its weird. Ive got a V2.0 board. Its definitely working but that flicker is annoying, especially if I decide to sell it down the line, I know some tirekicker is gonna complain lol
dude... looks great, ya down for a match of ki2?
Yeah when i get back from lunch. You will see me on.
@@MadDadsGaming you gonna put happs in there?? its pretty damn easy. I need to put weights into mine, i get very pully with these machines.
I am looking at how you have the Geekworm board connected at the 2:11 mark. Normally, the red cables indicate power and would be plugged into Pin 1 on the Geekworm board. On your configuration, looks like you have the cable reversed. So my question is in order to get this to work on KI, you have to plug in the LVDS cable the opposite way and plug into port 2 on the Geekworm board?
I didn't plug it in a different way i only plugged the cable into the geekworm adapter the way you see it. I hope this helps.
@@MadDadsGaming Ok...the reason I brought up because on the geekworm board, if you hold it and view with the HDMI port down, pin 1 for the LVDS would be on the right. This is where the power from the LVDS cable would normally be plugged in, which would be the red cables.
However, from looking at the video, you have the LVDS power on the left side. So was just curious if in order to get KI to work with the geekworm board, you had to plug in so the power for the LVDS cable was on the left side and not the right side, which would be how it would be plugged in normally. If it works, it works...was just curious. Thanks again.
@@therealsmilebit who's to say that it's power? Anyway, I see what you mean. the LVDS ribbon from the other A1U cabs are normally on the right when using the adapter. It's possible that his is different?
@@RoTeNdO Because Pin 1 indicates where the power goes. I am not talking about the A1UP PCB. Different A1UP PCB's have the Pin 1 on the left...some on the right.
I am specifically talking about the Geekworm board. If the HDMI is pointing down and you are looking directly at it, Pin 1 on each port is on the right.
If you look at the cable that came with the Geekworm board, or any LVDS cable for that matter, on the black 30 pin Dupont connector that plugs into the port, there is a dot, which is usually white or red. This indicates Pin 1 and it is the power.
Usually if you do not plug in correctly, can damage the board. Does not seem to be the case here and that is why I was asking about it. If it works, it works.
@@therealsmilebit Yes. That is interesting indeed. I have both the first version and 1.5v of the Geekworm LVDS to HDMI and both have the white arrow. I'm waiting for the 2.0 to get delivered so I can do some testing. I'm intrigued enough to test that out, but I don't want to damage any of my A1U pcbs.
Couldn't get mine to work on ki but did work on mk
Glad you got it to work with mk. It should work with KI as well though.
@MadDadsGaming i don't get why I would rather have KI bigger. At first I thought geekworm was doa
Can you PLEASE tell me the exact model monitor you are using. 19" Brand and model. I tried everything shown on two dell 20" 2007fpb and it does not work. It does not keep a stable image. Please let me know the exact model details on the monitor. Thank you.
It should work if you have everything as shown. The only reason I say that is because people have sent me pictures of their's working do to the video. If you need anything just email me if you like? Will give the model number when i get home. It is also on my street fighter big blue mods if you don't want to wait.
@@MadDadsGaming sent you an e-mail my friend. Thank you for your help
@@statuecollector5723 no problem man
Hey, are you still finding that the online gameplay is smooth? I was afraid after the initial rush of players that the distances would cause lag.
Its still good to me. I appreciate you for checking out the video. It does depend on how far they are from you though.
Thanks for the helpful reply. Going to pick this up since it’s on sale.
@@XAbbeldydooX cool can't wait to play you lol.
Which mount do you prefer, Tulsa or Anh Minh’s?
Both are good to me to tell you the truth. It really depends on how much work you want to do. I appreciate you for checking out the video.
So we are crystal clear on this….because this is something I’ve wanted to do with KI and T2…..after this install the machine turns on/off and runs just like it would with stock 17 inch? I’m not interested otherwise!
Yes just runs like if you had the original. I appreciate you for checking out the video.
@@MadDadsGaming AWESOME!!!! Thanks for making this video!❤️
@@danielwickman75 no problem 😊
how do you power the dell monitor and marquee?
The Dell monitor is plugged in with the cord and the marquee is plugged into the PCB. I use the Geek Worm adapter for the rest. Thanks for checking out the video.
@@MadDadsGaming can I use the stock pcb if I was to upgrade just the monitor like you did? I just want a bigger screen.
@@FiLiPHRESH yes that is what i did but you need the geekworm adapter though as well.
Have you or someone you know modded the X-men 4 player cab, simpson’s, or T2 to the Dell 2007fpb?
No but if I had it I would do it. Basically you need a geekworm adapter to do it if your keeping it stock.
I’ve tried using both versions of the geekworm (1.5 and 2.0). And it won’t work for me so I was seeing if you had any luck.
@@chumpboy13 yeah i probably would if I had the system you know me. Sorry its not working for you.
Looks good
Thank you and I appreciate you.