Really enjoyed your video. Wish you were in LA. My Chinese xpro ninja 125cc front blinkers dont blink but the rear do work after installing a new relay. After watching your very informative video, I am going to check all connections now.
Good video your good at telling it the way its is! A+ i have every thing working but no heard lights>dealer set the bike up ! i went for a ride sat down on the seat the scooter Shut off? Its a Dongfang 300 .i see the wireng problems! but no head lights can you help out om this one!??
Thks for your excellent job amazing I have a Vespa Lx 50 from 2007 all my lights working fine just when I break the indicators start flashing quickly also the bulbs from dash not caming on I change the speed meter and still the same any help please thank you very much appreciate it
I don't know when you'll see this but I figured I'd ask because the sellers of my ex-pro Maui are useless. They sent me an entire rare light console replacement including the brake light and the blinkers because the original one the running lights don't work. I got all the screws undone from the rare light console and took the side panels off to unscrew the sides but I can't seem to figure out how to get the top part of the light console out it appears to be underneath the bike rack. Would you happen to know if the bike rack needs to be disassembled in order to get the molding up from the top of the light console. And if not how on God's green earth do you get this dang thing out. I took it all apart today and had to put it all back together without being able to install the new replacement that I got. Very frustrating thst one has ro gonthru several steps. Sny suggestions
Hi theee good good video. Good workmanship. I have a problem with my scooter. I turned tye ignition on and all my indercators are flashing 😮😮 do you no wot it may be its led from factory and was all ok working. But found that the indercators sre all flashing at tye same time
Todd. Great information about Chinese scooters. I'm trying to subscribe to your site but it's not working. I'll try again. Question: I'm interested in the Ice Bear 300cc trike. Any thoughts on those?
Personally I would stay away from the 300. They are having problems with the rear ends . Icebear is currently working on the problems but are not selling any at the moment until it is fixed.
I am in the process of converting a 2019 Xmotos 250cc dirt bike to street legal I have purchased all parts to do this my question is can I use the stock wiring harness that came with the bike? I will check to see how many wires come out of stator and my bike did come with a battery
Mr. Wildwood . I actually have a 2020 XMOTO 250. I will have to look. It shouldn’t be a big deal since it already has a battery and regulator for charging. Front brakes already have a brake switch attached to bottom.
Help! I have no blinkers? I changed the relay indicator but still not working. I noticed the connector to the cable is rusted thinking if that is the problem?
i have a 200cc doang fang super scooter. the lights work except for the head light and the lights seem a bit dim on the dash and such, what is the issue and how to fix it???????????
How do I figure out the wiring to hook up the blinkers when the colors are the same? Do I test them and how? I don’t have the money to pay someone so I have to do it myself.
Front right blinker is pink Front left is brown. Rear right pink Rear left is brown The problem with vinos are the rear blinkers housings will both have brown wires coming out of the blinkers . So be aware of that. Taillight is purple/violet same as main headlight power Brake light is blue-white Black is ground
@@hakeemfb3 most Chinese scooter have similar coding . Blinkers are usually light blue and orange with green(ground ). Headlight white , blue and green ground . ( white and blue are your hi and low wires) Ignition switch is red(hot), black(on), green (ground). Black with white stripe is kill So when you turn it on it connects the red and black. Off is green and black with white stripe connected. Start button yellow with red stripe .
Yes. The headlights only work when the scooter is running . Head light and tail light run off the rectifier (voltage regulator). Blinkers and brake light run off the battery
I bought my Yamaha vino 50cc as a project and I need to figure out the blinker wires and the headlight and taillight but I can’t afford the oem stuff. What’s your suggestion on diy?
Unfortunately YAMAHA STUFF IS UNIQUE. Main thinking is to determine if it getting power . Some Vinos use a tiny battery that sucks . And is expensive to replace .
You left me hanging. Once you switched to the handle and master cylinder you didn't go back to all the wires that weren't attached and show what goes where. I'm in that spot and you almost got to that but diverted. Can you help with those unattached wires?
Dear sir, i'm going nuts... My 50cc GY6 scooter's back park lights not turning on... Front park light, ok. Brake Light, Ok. Blinkers, Ok. Bulb is also okay. I'm checking connection with a light pen connected to ground, there is light on the pen. But some how not enough voltage is coming for park light. Can you please point where to investigate? :(
@@toddrapp7904 In here they call parking light that the one allways runs. One on the headlights and one on the tail. The one on the tail has one bulb but two functions, one low light allways runs and it gets brighter when brake applied. The one should allways runs doesn't work properly.. (No light comes, looks like lower voltage than it requires to lit, because when low voltage light tester touches the socket it lits)
When we first started fiddling with the scooter (it had been sitting for 2 years) my friend put the jumper cables on backwards (pos on neg). We saw smoke coming from between the front turn signal area (the cover was on). Can someone suggest a video to help me troubleshoot what happened? I can't find any burnt-out wire or anything looking suspicious. I have a multimeter but have no clue on how to use it for this application.
I have a tao tao 150 that's been sitting for awhile I had to replace the ignition switch because the people that gave it to us lost the keys I put a new battery on it and I can't get the lights to come on or the starter to cranks unless I jump the solenoid
There is an online fuse connected to positive terminal . Make sure that is good. Also make sure the ignition switch wires match . Red/red Green to green, black to black, black/white to black/white. Sometimes they are not in the same position in the plug.
Mines the opposite everything but the rear tail light works when I press the brakes the brake light turns on but without the brakes engaged the rear light stays dark any help?
They work off of two different wires and power supplies . Brake light works off battery and brake switch . Tail light runs off of voltage regulator same as headlight . Motor has to be running to power tail lights . If not check wires at rear plug and socket
@@toddrapp7904 the front light works everything but the taillight will work when bikes runing stays dark i dont want to have to rip apart my front cluster again haha
I have a 2013 tao tao my blinker wont blink just stay solid when turned on then turn off when u out the switch back to center i replaced the relay n that didn’t help
There is a flasher that I would replace first . Second , if the bulb is bad on the other blinker on the same side it may not blink . For instance , if the front blinker comes on but doesn’t flash, check rear build to make sure it is good
The head light and tail light are usually ran off the same circuit . The brake light is a totally different circuit . The rear bulb has two filaments . So one could be bad.
I need help with an ice bear three wheel moped the horn don't work and someone messed with the wiring and I don't have any knowledge on this type of moped
Biggest thing is to determine if your horn is bad or wiring /button. Hook up a charged battery directly to the horn . If it Honks then your horn is good and you can direct attention to the switch . Or if you have a bolt Meter . Unplug horn and hook Leads to the horn wires. Push button . If you have 12 volts then button is good and you have a bad horn
@@toddrapp7904Someone already been messing with it and cut the wires to short and tried jumping stuff and now the turn signal don't work and it keeps blowing fuses
Hi.. I got a trouble with my headlights on my scouter.. The problem is that my lights are not strong enough... I have changed the light machine and the Regler and the battery problem not solved any suggestions?
giwwrgos-svetlana there are two different bulbs made a 25 watt and a 35 watt. Make sure you try the 35/35 watt bulbs. Also the Xenon bulbs (blue) help as well
Also make sure the socket is grounded good.. run a wire from the socket to the frame . See if the brightness goes up. The regulator should be putting out around 13.8-14.3 bolts at headlight..
Hey buddy, found your clip by searching for "LED headlight upgrade flashers not working" I don't think this covers that, though, so please allow me to pick your brain, if you have knowledge please let me know, if not no offense taken. So I switched to the plug and play LED headlight from old lamp. The spread of the LED is great, but my flashers stopped working, simply staying "on/lit" solid. My flashers are still stock bulbs. Do you have any tips on what would cause this issue? If not, I didn't mean to waste anyone's time. Thanks for reading. Notes:horn and brake light still works. Unit reference from eBay: WinPower 6000K BA20D H6 COB LED Motorcycle Moped ATV Headlight Bulb Hi/Lo Lamp White USA
The LED DO NOT DRAW ENOUGH POWER for flasher to work . You can use LED on front only or back only. . Or install a resistor then all will work. There are also special LED FLASHERS
@@toddrapp7904 so, in order to complete this modification, one should also upgrade the flashers system or install a resistor, yes? Did you do the flashers or resistor? I used LED only on front headlight bulb. Only. Nowhere else.
@@AgeofReason , either one. The headlight has no effect on flashers . Nothing needs to be done to it . The blinkers work on a flasher system and there needs to be resistance for it to work .. Either way will work . The LED FLASHER IS EASIEST . Just a plug and play . Just make sure the plugs are the same . There a a few different plugs .
Hi Todd rapp, I have an issue with my 125cc scooter and it's the headlights turning on and off while I'm riding at random times. Do you have any suggestions as to why this may be happening and any fixes that can help me? Many thanks dude, and great vid by the way
SKITSAFONIC cold also be metal prongs on bottom of socket are barely touching the bulb. Simply remove bulb and push up prongs with your finger the reinstall bulb
I am a dealer and have been dealing with the Chinese market for 13 years. They have gotten better but still have to check everything before they hit the showroom .
Learning Alot about these scooters.I am buying a Tao Tao 150 next month.Helps to know some things.Thank You.
I’m a Tao dealer .
Really enjoyed your video. Wish you were in LA. My Chinese xpro ninja 125cc front blinkers dont blink but the rear do work after installing a new relay. After watching your very informative video, I am going to check all connections now.
Little bit of investigating from your advice helped me a bunch. Koodos to you bro. Thanks, again. Enjoy your day and God bless 🙏 ❤
Good video your good at telling it the way its is! A+ i have every thing working but no heard lights>dealer set the bike up ! i went for a ride sat down on the seat the scooter Shut off? Its a Dongfang 300 .i see the wireng problems! but no head lights can you help out om this one!??
Thks for your excellent job amazing I have a Vespa Lx 50 from 2007 all my lights working fine just when I break the indicators start flashing quickly also the bulbs from dash not caming on I change the speed meter and still the same any help please thank you very much appreciate it
Great video ! Helped a lot
Thank you, I learned something today
you should put part 1 and 2 in the description. they're hard to find in RUclips algorithm
Both my headlights stopped working at the same time it's a tao tao blade 50cc not sure what I'm looking for but I found your video haha
@@michaelharris8346 if both went
Out , chances are the ground plug backed out of the plug
Thank you for the DYI video
I don't know when you'll see this but I figured I'd ask because the sellers of my ex-pro Maui are useless. They sent me an entire rare light console replacement including the brake light and the blinkers because the original one the running lights don't work. I got all the screws undone from the rare light console and took the side panels off to unscrew the sides but I can't seem to figure out how to get the top part of the light console out it appears to be underneath the bike rack. Would you happen to know if the bike rack needs to be disassembled in order to get the molding up from the top of the light console. And if not how on God's green earth do you get this dang thing out. I took it all apart today and had to put it all back together without being able to install the new replacement that I got. Very frustrating thst one has ro gonthru several steps. Sny suggestions
Hi theee good good video. Good workmanship. I have a problem with my scooter. I turned tye ignition on and all my indercators are flashing 😮😮 do you no wot it may be its led from factory and was all ok working. But found that the indercators sre all flashing at tye same time
Some Have a red flasher button on the dash like a car . Is it depressed and on?
I work on these and I always run into problems with no crank no start and now I know how to fix it!
We're u located
@@jodyholcomb3738 Jackson Missouri
Most are brake switch issues or bad solenoid
What is the red plug with the jumper wire on these maddogs
Todd. Great information about Chinese scooters. I'm trying to subscribe to your site but it's not working. I'll try again. Question: I'm interested in the Ice Bear 300cc trike. Any thoughts on those?
Personally I would stay away from the 300. They are having problems with the rear ends . Icebear is currently working on the problems but are not selling any at the moment until it is fixed.
My scooter has a switch on the right side I thought it turns the running light on but I can't get it to do anything now idk where to start to diagnose
Good vid 👍
Halleluja! Some Times it's Essy! 👍🤠
Dose rhese lights have a light controller like a little regulator
There is a voltage regulator that converts power from stator to run headlights and charge battery . Blinkers and tail light run off battery
Have a turn signal bulb not wanting to work.. thought it burnt out and even with new bulb wouldnt light up
I am in the process of converting a 2019 Xmotos 250cc dirt bike to street legal I have purchased all parts to do this my question is can I use the stock wiring harness that came with the bike? I will check to see how many wires come out of stator and my bike did come with a battery
Mr. Wildwood . I actually have a 2020 XMOTO 250. I will have to look. It shouldn’t be a big deal since it already has a battery and regulator for charging. Front brakes already have a brake switch attached to bottom.
Help! I have no blinkers? I changed the relay indicator but still not working. I noticed the connector to the cable is rusted thinking if that is the problem?
Did you not watch this video
Please show the combination of colors because i have many problmes with this. Tku
You didn't ohm test the first brake switch to see if it was defective.
i have a 200cc doang fang super scooter. the lights work except for the head light and the lights seem a bit dim on the dash and such, what is the issue and how to fix it???????????
The voltage regulator is week or bad . Check headlight bulb. The headlight gets its power from Regulator . All other lights are from battery .
How do I figure out the wiring to hook up the blinkers when the colors are the same? Do I test them and how? I don’t have the money to pay someone so I have to do it myself.
Front right blinker is pink
Front left is brown.
Rear right pink
Rear left is brown
The problem with vinos are the rear blinkers housings will both have brown wires coming out of the blinkers . So be aware of that.
Taillight is purple/violet same as main headlight power
Brake light is blue-white
Black is ground
@@toddrapp7904 is this wiring color coded the same for all scooters or it varies between makes models?
@@hakeemfb3 most Chinese scooter have similar coding . Blinkers are usually light blue and orange with green(ground ).
Headlight white , blue and green ground .
( white and blue are your hi and low wires)
Ignition switch is red(hot), black(on), green (ground). Black with white stripe is kill
So when you turn it on it connects the red and black. Off is green and black with white stripe connected.
Start button yellow with red stripe .
My 2019 wolf lucky sCooter 49cc just changed the turn signal relay it did burnt the wires.....
My right turn right signal doesnt work when engine is on. When is off it does work
I figured out the taillight and signal lights but the headlight doesn’t come on so does the scooter need to be running for the headlight to work?
Yes. The headlights only work when the scooter is running . Head light and tail light run off the rectifier (voltage regulator).
Blinkers and brake light run off the battery
I bought my Yamaha vino 50cc as a project and I need to figure out the blinker wires and the headlight and taillight but I can’t afford the oem stuff. What’s your suggestion on diy?
Unfortunately YAMAHA STUFF IS UNIQUE. Main thinking is to determine if it getting power . Some Vinos use a tiny battery that sucks . And is expensive to replace .
You left me hanging. Once you switched to the handle and master cylinder you didn't go back to all the wires that weren't attached and show what goes where. I'm in that spot and you almost got to that but diverted. Can you help with those unattached wires?
@@shaunaromine3709 check the back of the plugs . They always back out of the back of plug .
Dear sir, i'm going nuts... My 50cc GY6 scooter's back park lights not turning on... Front park light, ok. Brake Light, Ok. Blinkers, Ok. Bulb is also okay. I'm checking connection with a light pen connected to ground, there is light on the pen. But some how not enough voltage is coming for park light. Can you please point where to investigate? :(
I don’t know if I have seen a scooter with parking lights . Most just have tail light , brake light , blinkers and some have running lights .
@@toddrapp7904 In here they call parking light that the one allways runs. One on the headlights and one on the tail. The one on the tail has one bulb but two functions, one low light allways runs and it gets brighter when brake applied. The one should allways runs doesn't work properly.. (No light comes, looks like lower voltage than it requires to lit, because when low voltage light tester touches the socket it lits)
When we first started fiddling with the scooter (it had been sitting for 2 years) my friend put the jumper cables on backwards (pos on neg). We saw smoke coming from between the front turn signal area (the cover was on). Can someone suggest a video to help me troubleshoot what happened? I can't find any burnt-out wire or anything looking suspicious.
I have a multimeter but have no clue on how to use it for this application.
Probably melted the group wire
Check ground wire on ignition switch . Make sure it is not melted
I have a tao tao 150 that's been sitting for awhile I had to replace the ignition switch because the people that gave it to us lost the keys I put a new battery on it and I can't get the lights to come on or the starter to cranks unless I jump the solenoid
There is an online fuse connected to positive terminal . Make sure that is good. Also make sure the ignition switch wires match . Red/red
Green to green, black to black, black/white to black/white. Sometimes they are not in the same position in the plug.
my front lights com on but i dont have no night lights in the back can someone tell me what might be wronmg
Mines the opposite everything but the rear tail light works when I press the brakes the brake light turns on but without the brakes engaged the rear light stays dark any help?
They work off of two different wires and power supplies . Brake light works off battery and brake switch . Tail light runs off of voltage regulator same as headlight . Motor has to be running to power tail lights . If not check wires at rear plug and socket
@@toddrapp7904 the front light works everything but the taillight will work when bikes runing stays dark i dont want to have to rip apart my front cluster again haha
Need help with the throttle wires there is no we're to pull it in
I have a 2013 tao tao my blinker wont blink just stay solid when turned on then turn off when u out the switch back to center i replaced the relay n that didn’t help
There is a flasher that I would replace first . Second , if the bulb is bad on the other blinker on the same side it may not blink . For instance , if the front blinker comes on but doesn’t flash, check rear build to make sure it is good
Nice 👍
We're does the wires go form the brake my horn nothing comes on the wires are not all connected and can't find it no were
The head light and tail light are usually ran off the same circuit . The brake light is a totally different circuit . The rear bulb has two filaments . So one could be bad.
Thank you
if I turn on headlight, brakes works electric scooter hero Optima
Fix the turn signals, why? It's not like they are going to get used anyway, at least not here in the Philippines...
What if my light gets broken everytime I put a new one on it
Replace your voltage regulator . If it is bad it will blow the bulb once you rev it up .
Thanks
I need help with an ice bear three wheel moped the horn don't work and someone messed with the wiring and I don't have any knowledge on this type of moped
Biggest thing is to determine if your horn is bad or wiring /button. Hook up a charged battery directly to the horn . If it
Honks then your horn is good and you can direct attention to the switch .
Or if you have a bolt
Meter . Unplug horn and hook Leads to the horn wires. Push button . If you have 12 volts then button is good and you have a bad horn
@@toddrapp7904Someone already been messing with it and cut the wires to short and tried jumping stuff and now the turn signal don't work and it keeps blowing fuses
@@toddrapp7904 does it matter what wire goes where on the horn
@@nicolewebb558 not really
@@toddrapp7904 is the horn in sequence with the turn signal
Hi.. I got a trouble with my headlights on my scouter.. The problem is that my lights are not strong enough... I have changed the light machine and the Regler and the battery problem not solved any suggestions?
giwwrgos-svetlana there are two different bulbs made a 25 watt and a 35 watt.
Make sure you try the 35/35 watt bulbs. Also the Xenon bulbs (blue) help as well
Also make sure the socket is grounded good.. run a wire from the socket to the frame . See if the brightness goes up. The regulator should be putting out around 13.8-14.3 bolts at headlight..
Why would break lights work and turn signals don't
Flasher
I got stock front signals an after brake an signals on bike of gen v maddog
Where is part 2?
Hey buddy, found your clip by searching for "LED headlight upgrade flashers not working"
I don't think this covers that, though, so please allow me to pick your brain, if you have knowledge please let me know, if not no offense taken.
So I switched to the plug and play LED headlight from old lamp.
The spread of the LED is great, but my flashers stopped working, simply staying "on/lit" solid.
My flashers are still stock bulbs.
Do you have any tips on what would cause this issue? If not, I didn't mean to waste anyone's time.
Thanks for reading.
Notes:horn and brake light still works.
Unit reference from eBay:
WinPower
6000K BA20D H6 COB LED Motorcycle Moped ATV Headlight Bulb Hi/Lo Lamp White USA
The LED DO NOT DRAW ENOUGH POWER for flasher to work . You can use LED on front only or back only. .
Or install a resistor then all will work.
There are also special LED FLASHERS
@@toddrapp7904 so, in order to complete this modification, one should also upgrade the flashers system or install a resistor, yes?
Did you do the flashers or resistor?
I used LED only on front headlight bulb. Only. Nowhere else.
@@AgeofReason , either one.
The headlight has no effect on flashers . Nothing needs to be done to it .
The blinkers work on a flasher system and there needs to be resistance for it to work ..
Either way will work . The LED FLASHER IS EASIEST . Just a plug and play . Just make sure the plugs are the same . There a a few different plugs .
@@toddrapp7904 thank you. when I installed the light my flashers worked at first so I suspect a different short popped the flashers relay.
@@AgeofReason unless you installed a new headlight with the blinkers in it , the headlight itself is usually on a different circuit .
my scooter was in the rain and now no lights work
That's why the prices on line are so low.
Nice
Hi Todd rapp, I have an issue with my 125cc scooter and it's the headlights turning on and off while I'm riding at random times. Do you have any suggestions as to why this may be happening and any fixes that can help me? Many thanks dude, and great vid by the way
Check the ground wire on the socket .
SKITSAFONIC cold also be metal prongs on bottom of socket are barely touching the bulb. Simply remove bulb and push up prongs with your finger the reinstall bulb
You are not right I got mine from a dealer they have the same issue.
I am a dealer and have been dealing with the Chinese market for 13 years. They have gotten better but still have to check everything before they hit the showroom .
Code is fire
im dizzy now.. thx
It's a fuse
What do you do for one if horn works an lights working but won't start. I've got one bin try to fig it out four 2 years now can any one help me
I fix it
Some got fuses to might be a fuse