Do not put the solder paste on your finger! That’s a good way to get heavy metal poisoning! Instead, use a piece of plastic like an old credit card to push it into the holes on the stencil.
I mean, I'd probably avoid touching it if I could, but if you're referring to the lead content of solder paste, transdermal lead isn't really a problem so long as you wash your skin very, very carefully. Where it *could* prove a problem is if you handle solder, don't wash your hands thoroughly, and then touch food or your mouth with your fingers.
@@freddychopin However, the exposure from paste is much higher than wire or bar solder because paste is made of microspheres which have a MUCH higher surface area; allowing for more metal diffusion into the surrounding materials (I.e, flux). And if you do manage to ingest the paste, that same effect will also amplify the amount of lead that you absorb. And the nasty thing about lead poisoning is that the effects aren’t immediately obvious… 🤔
For Solder Paste --- es.aliexpress.com/item/32965239642.html?spm=a2g0o.productlist.0.0.18e559f5dCTDGR&algo_pvid=401e188c-044d-46d4-95ce-fadbce89af49&algo_exp_id=401e188c-044d-46d4-95ce-fadbce89af49-16
For Paste Flux --- es.aliexpress.com/item/33027116263.html?spm=a2g0o.productlist.0.0.42662840XfNlI9&aem_p4p_detail=202106252007587735841513241980009520270
master sana mapansin mo.. halimbawa remove frp and password via ufi.. pwede bang hindi ma bura mga file halimbawa photos.contak naka save sa phone.? salamat and advance.
@Súráj kúmár I don't exactly know why eMMC is getting dead? But some of the reasons the phone is abuse or too much use of mobile gaming. some are hardware failure, water damage, short circuit, etc.
Boss Ang lamig sa mata ...Ang lamig pa nang kamay.... God bless always
I would add a couple of points. After removing the balled-BGA from the stencil, direct heat at it for those balls to hold their place even tighter.
i bought a stancil with various kind of eemc but i need the pcb holder to mantain my bga during reballing. Can you suggest one. Thanks
Do not put the solder paste on your finger! That’s a good way to get heavy metal poisoning! Instead, use a piece of plastic like an old credit card to push it into the holes on the stencil.
I mean, I'd probably avoid touching it if I could, but if you're referring to the lead content of solder paste, transdermal lead isn't really a problem so long as you wash your skin very, very carefully. Where it *could* prove a problem is if you handle solder, don't wash your hands thoroughly, and then touch food or your mouth with your fingers.
@@freddychopin However, the exposure from paste is much higher than wire or bar solder because paste is made of microspheres which have a MUCH higher surface area; allowing for more metal diffusion into the surrounding materials (I.e, flux). And if you do manage to ingest the paste, that same effect will also amplify the amount of lead that you absorb. And the nasty thing about lead poisoning is that the effects aren’t immediately obvious… 🤔
Good job nice video 🎉🎉🎉🎉🙏🙏
Thank you ❤️
I thank you for this video .. I've question about the PCB cleaner, from where I can buy it. thanks again.
99% isopropyl alcohol
@@M.E63 if you don't mind .. do video about isp method .. or even Jtag .. I appreciate your work
@@abugin8191 you want on it any particular board, maybe Sony android tv as I’m doing one next ?
Which hot air gun is you are using
google
Please give the name of Solder paste flux & PPD soldering paste which you have used in this video thanks.
For Solder Paste --- es.aliexpress.com/item/32965239642.html?spm=a2g0o.productlist.0.0.18e559f5dCTDGR&algo_pvid=401e188c-044d-46d4-95ce-fadbce89af49&algo_exp_id=401e188c-044d-46d4-95ce-fadbce89af49-16
For Paste Flux --- es.aliexpress.com/item/33027116263.html?spm=a2g0o.productlist.0.0.42662840XfNlI9&aem_p4p_detail=202106252007587735841513241980009520270
High quality Paste Flux --- es.aliexpress.com/item/32916666961.html?spm=a2g0o.productlist.0.0.5dfec458H5zQWG&algo_pvid=3f6877aa-5d6f-4eab-bc3f-06352abaab25&algo_exp_id=3f6877aa-5d6f-4eab-bc3f-06352abaab25-0
Nice job sir
Thank you
master sana mapansin mo..
halimbawa remove frp and password via ufi..
pwede bang hindi ma bura mga file halimbawa photos.contak naka save sa phone.?
salamat and advance.
Reballing...after...emmc...data...recoverybro
Sir G ek Questions h
Emmc Damage kese hoti h
Sorry sir. i don't speak hindi :)
@@techtomer
Emmc Dead Why??
@Súráj kúmár I don't exactly know why eMMC is getting dead? But some of the reasons the phone is abuse or too much use of mobile gaming. some are hardware failure, water damage, short circuit, etc.
I'd Repair Ho jayegi
Bubble comes out when I rebball IC
Put small amount of bga paste with tissue paper and press until the flux absorb. Sorry not mention on the video
idol nice video
Сомнительное решение наносить пасту пальцем 😀
dapat tol the master
Balang araw tol magiging the master din tayo hehe
Hi.