I get so frustated trying to get faster at f2l because I can solve oll and pll together in 5 seconds and cross in 5 seconds but f2l takes me at least 30 seconds
I usually used to solve in about 1 minute and and above, but when I learnt cfop and started watching your vedios I can now solve it in 45 seconds! Which has a lot of improvement. Compared to other vedios your tutorials are much easy to understand and follow 👍👍👍👍 👍.
@@kytdk756 I don't doubt that ParadoxCubing is a good youtuber, all cubing channels should be repsected, but maybe he didn't know that he got the M and M's confused, and if he does more tutorials in the future involving algorithms, this can only improve the quality of his videos. You being in denial doesn't help ParadoxCubing at all.
buggy b i read some forums and stuff about that problems people say that everyone has that problem and theres no way to stop unlles just more practice, people say after a lot, lot of practice yoyur mind only sees the f2l pieces and just dosnt see tyhe other pieces
OMG THANJS SO MUCH FOR THIS VIDEO! i used to do the exact same thing as you, thanks so much for the algorithm, you just took about 15 seconds off my time. subscribed.
In the first example you give I use F l' F' l. It's really fast if you grip right with your left hand(you hold the cube with the thumb under the cube with the left hand before executing first F, that way after l' you use your left hand index finger to do the F' and then go back). Much better then F R' F' R. Mine It's basically the same but you don't use two F moves. 10x for the tutorials. Leaned a lot from them and I continue to watch them :)
Just few things to say here. First of all, you are a great teacher, great speedcuber and definetely deserve more subs, views, likes etc.. Second, CFOP method is actually not that hard once you get the hang of F2L, as it took me 1h straight to just figure out how to solve F2L, and now I can do it constantly (only problem is that I need to use more finger tricks and no cube rotation), and third, heck yeah, 2-look OLL and 2-look PLL are both easy to learn but take more time, so instead what I did, was set up each of the cases by removing pieces from the cube and rearranging them to corresponding case, and for each day I repeated each algorithm over 100 times. In less than a month, I learned full OLL and full PLL which got me under sub 10 time (nope im not participating in contests yet) and my PB is 7.26 secs (7.261 more clearly), so im developing my method of solving cube, which would do F2L and OLL in the same time (yes sounds impossible, but I've researched), so after I finish, I would personally like to PM you and give you instructions on ACFOP (Advanced CFOP) and I want you to test it out. If learned all algorithms properly (I've developed 72 of them so far, with 30 exceptions that need to be put to the test, and over 20 more added) the cube could be solved in less than 3 seconds. If I manage to do cross + F2L OLL PLL (orienting and permutating last layer included with F2L) that would give cubers an average time of 2.5 secs (if as fast as Lucas Etter). Thanks for reading, and GL!
Mats Valkyrie uses a series of algorithms to do OLL before inserting the last F2L pair, it’s like 200+ algs I think, but there’s something called Winter Variation that has less algs so it’s easier to learn, but takes longer to perform.
Hey Paradox just wanted to say that loved the tutorial and the look ahead strategy for looking at the cube as a whole really opened my eyes and helped me look ahead a lot better. Thanks.
Hey I'm a beginner cuber, at 4:40, can you just solve that edge piece the beginner way? I normally do that and I think it saves time and is much easier
On th F2L pair at 4:40, instead of bringing the corner up using, breaking up the pair, then inserting it, why didn't you just do UL'U'LU'B'UB? It would have inserted the edge faster than doing the F2L case for that?
0:54 Just trying to visualize here, but wouldn’t U’ F’ U F work here as well? Or am I not visualizing this correctly? lol. Is there any particular reason you can see why doing it with the algorithm you’ve shown would be advantageous? (Not being argumentative lol, just relatively new to the cube and trying to understand and get other perspectives.)
my average is around 35 secs and my pb is 24.7 i know 2 look pll and oll. How can i improve my time? do u recommend me to watch your f2l algorithm video? Also i just ordered a stickerless zhanchi, Is it a cool cube?
I recommend learning more PLL algorithms and working towards full PLL, you can also learn some easy OLLs as well. Also yeah it might be useful to learn some short quick F2L algs to make your F2L more efficient, but I would say mostly work towards full PLL. And yes, the stickerless zhanchi is a great cube, my first speedcube :)
+ParadoxCubing Me too, my average is 35 sec, but i think my f2l is slow.I looked at timer couple times,and i finish my cross and f2l in like 25 sec.I think that time is bad.
I know it's 6 year ago and it's 2020 now but I tried to solve in cfop and tried to be the best on our country so I practice alot but I like this tutorials
i started cubing 2 months ago average 1 min 6, pb: 48 sec. your vids are really helpful, so thank you very much! I just have one question at 3:00 you insert the red and blue pair. Can you tell me why you use this algorithm instead of using sledgehammer?
At 4:56, when you did the 1LOLL algorithm, you did a U2 AUF and did l' U' L U' L' U2 l. Instead, what you could do is r' U' R U' R' U2 r without doing the U2 AUF. I'm quoting you, "so it's the exact same moves except you're doing it with your left hand". Only in this case, you're doing it with your right hand. I know OLL doesn't matter in this video but still.
I'm not sure if you check this video much anymore, but I do 2 look oll, and pll. If I wanted to learn full OLL and PLL should I learn PLL first? Or OLL? Cause for OLL I have an idea to learn all OLL's. To learn how to do OLLS from the L on the cross, the line, and the single middle piece, since I already know the yellow cross's OLLS.
Something weird for me is that the cube rotation thing, I never used those. When i first learned f2l all algorithms I saw didn't have any cube rotations, except for 1. This video helped me. Also I guess being both handed is good (I forgot how to spell the neutral handed word).
i was at the same stage as you a couple of months ago just practice recognize your f2l cases faster all these things will help but mostly practice im now sub 30 because of paradox :))))
for the algorithms you give us, sometimes they come out on the left side. Am i supposed to just do the opposite of the algorithm? if so then if it is asking for the front face to be turned F' would i do B? also for the algorithm F R' F' R on the left side would i do B' R B R'. i tried both ways neither worked, i may have done them wrong.
2:37 what oll was that? thats not a possible oll! You probably had a corner twist or something, cuz the all the white coners were solved, and one yellow corner wasn't oriented properly.
where did you get your stickers? They look nice. I want to test out what florescent red would look like. 'Cause my preferred color scheme is, Red/Orange or the new YJ/Moyu tangerine/coral type orange. Yellow/White/Black. Green/Florescent green/Lightblue or birght blue
This was Izo Stickers Super bright set. Unfortunately puzzleaddicitions got shut down, if it ever re-opens again then make sure to check it out. It's the same as thecubicle full bright stickers, but the blue is called sky blue.
ParadoxCubing yeah I knew of Izo... I hope he post his video soon. He started Cubing YT channel the same time I did. I use to get a lot of praise because I was the only female cuber at the time on YT and I was fast. But now 5-6 years later, more female cubers and everyone is faster than me lol. But I heard that he is only going to be selling stickers when his site is up and running again.
Bro i need your honest opinion. yea im really a beginner in F2l but i memorize or rather master all PLL and OLL. How long do i have to take to master all of your f2l tricks?
yay! great job on this tutorial, too bad I already know all this stuff :(. I wonder what I should do next to improve my times, I average around 30 and my pb is 19 and I do advanced almost intuitive F2L but with pretty bad look ahead, 2 look PLL and sloppy sometimes 4 look OLL. any advice on what to work on next?
Yeah I'm working on my PLL these days so that's good, and about the OLL how many cases do you think I should learn? I consider myself a fast learner, I mean I can learn even 3 algs a day of PLL for example but I won't be able to take the case and figure out the algorithm for it fast it would take me time to recognize the case easily. Oh and about the cross, I do fairly it well (advanced) right now so I think working on my PLL and OLL would be better for now. Anyways, thanks for the help.
I know around half of the OLL algorithms (or maybe a bit more) so I would recommend learning like half at the same time as finishing learning full PLL. Go for the ones that dont have any edges and just corners oriented, since those are 3 look. Hope this helps and good luck!
I'm currently learning Full OLL and I know Full PLL and some F2L cases, I'm really slow at F2L and I usually get pauses to look for pairs, am I not using my Inspection time wisely or do I need more practice?
So does M follow L or R? I thought ParadoxCubing was a decent cuber? How can he get it wrong? I don't know full cube notation for this reason exactly! Different websites say different things! What's the true notation?
+Paradox Cubing i have a question... It takes me around 30-50 seconds to solve the rubik's cube by using the beginner's method.Will it make me faster to solve it if i learned this CFOP method and by how much time?
I wanna know how people can do beginners method that fast! when i first learnt it, I didnt practice the method, just went straight to cfop, cfop pb is 28.18 and I've just done beginners method, took me over 2mins! haha you should definately switch if you havent already, you'll be sub 10 in no-time!
I think I made somehow my cube sticky a little and it makes me nervous, any ideas how to clean it without damaging my stickers? :)) Btw I have Moyu Aolong V2 Also, as much as I remember you said that for beginners you reccomend a cube with not really good corner cutting to make your turns more accurate, I have that problem so what cube do you recomend me to buy for faster TPS?
Hey, I have learned all the algos for f2l and I wonder if it´s bad to use lower case d moves to basically rotate the cube? Using the algos on the back is so difficult since you have to insert the algo in your brain first..
I've just started with the advanced method and I'm currently learning the F2L. I just managed to solve the F2L without turning the cube once. The downside was that I had to use F and B moves a lot. Especially when inserting a pair on the backside, where you cant see. Is there a way to minimize the changes in hand position? Is it possible to insert a pair on the back side without using B moves?
Idk if it counts as a cube rotation, but usually I drag the layer or two layers with me so it does both in 1 move. It seems fine to me but I'm not a pro by any means
hi my friend . I know two mather 1 is nomel 2 the f2l but when I put the timer the nomel mather take time 01.00 minutes and with f2l it take 02.00 minutes what I should so ? I have seen your all videos on f2l .
The algs u re using not only for f2l but for oll and pll also are from a single site (if yes which one?) or from various sites and vids? I m just asking because the site I m using (cubewhizz) has only one type of alg for f2l for fr...not all 3 u just used :P and so I have to search for rare vids like this one to find the rest of them. In any case thx for the vid it was really helpful!
I don't agree with the first one, doing a sledgehammer is slower than a cube rotation and inserting in my opinion because it requires a regrip. Maybe it's just my execution
Please reply me. I am beginner cuber and i just use a random or a regular cube like its not a speedcube and my average is 2mins and i am buying Qiyi Big sail 60mm so is it a good cube for me. I am beginner. Please tell me and give me some suggestions.
Hey, I figured that youtube is a pretty informative source so can anyone help me? I use beginners oll and beginners pll. I'm trying to learn f2l and it's pretty hard because it takes forever for me to do. My best time is 1:04 without using f2l. Does anyone know a way for me to solve faster? Do I learn advanced oll or pll or try to learn f2l better? Sorry for all the questions.
![F2L Example Solves [Beginners]](http://i.ytimg.com/vi/NLflaa3LZP8/mqdefault.jpg)
![F2L Example Solves [Beginners]](/img/tr.png)
![F2L - All 42 Cases [Intuitive Explanation]](/img/1.gif)
I get so frustated trying to get faster at f2l because I can solve oll and pll together in 5 seconds and cross in 5 seconds but f2l takes me at least 30 seconds
Venny, same happens with me
Same dude
And i am solving the cross in 3 seconds f2l in 7 seconds and oll and pll in 10 seconds😕
Keep practicing, or try roux
Oll pll 5 secs cross 5 secs but f2l 15 secs
2nd layer sucks
As soon as you said F R' F' R, I was like: It's called sledgehammering it in
+hoObzeen well im not soo much into cubing that I know EVERYTHING
That a reverse sledge hammer
me: oh just do the algorithm: U R D U M B
@@IdkAnymoreXD00 that's a hedge
These are by far my favorite cfop tutorials, all of your tutorials are amazing. Thank you so much for making these.
I usually used to solve in about 1 minute and and above, but when I learnt cfop and started watching your vedios I can now solve it in 45 seconds! Which has a lot of improvement. Compared to other vedios your tutorials are much easy to understand and follow 👍👍👍👍 👍.
You have your Ms and M's mixed up, bro.
Shut up
@@kytdk756 Why are you rude? Nissevex is right
@@hellfireofdooom8876 ParadoxCubing is a very good youtuber and he doesn't need crap from uneducated stump heads like yourself
@@kytdk756 Haha funny
@@kytdk756 I don't doubt that ParadoxCubing is a good youtuber, all cubing channels should be repsected, but maybe he didn't know that he got the M and M's confused, and if he does more tutorials in the future involving algorithms, this can only improve the quality of his videos. You being in denial doesn't help ParadoxCubing at all.
Thank yu ParadoxCubing, my personnal best is 51 secs now, but I know I can still improve it.
Emmanuel Corral yes you can I know you can I was you now I am sub 40
Emmanuel Corral my pb used to be 60 seconds. Now my pb is 17 (without a skip) :D
Magical Potato nice. Still working hard to improve my pb which is 47 secs in the mean time.
Emmanuel Corral yep i was sub 1:10 now 35
A Baller Cubing cool
your videos are just awesome.........cool videos...........clear voice............concept gets clear .......everything is just up to mark..
thank you! I did my 3 x3 from 1 minuet to 33 second, Best tutorial for F2l ever
im always taking a looot of time finding the pairs how do i find them faster?
Same dude, but still I can do CFOP F2L in like 10-20 seconds and my PB with CFOP is 40 seconds
buggy b i read some forums and stuff about that problems people say that everyone has that problem and theres no way to stop unlles just more practice, people say after a lot, lot of practice yoyur mind only sees the f2l pieces and just dosnt see tyhe other pieces
hmm ok I guess ill just practice :P
buggy b same for me :)
Wait, where did you learn your advanced f2l?
OMG THANJS SO MUCH FOR THIS VIDEO! i used to do the exact same thing as you, thanks so much for the algorithm, you just took about 15 seconds off my time. subscribed.
thanks you are the only one that i know shows the algorithms thank y9u so much
M and M' are switched in some of the cases.
Z-Perm uses M'.
This improved my time massively! Thank you
Your welcome :)
love your intro and your CFOP series!!
1:53 - "I know when did f2l, all i used was my uncle-----i mean, my right hand"
LMAO
In the first example you give I use F l' F' l. It's really fast if you grip right with your left hand(you hold the cube with the thumb under the cube with the left hand before executing first F, that way after l' you use your left hand index finger to do the F' and then go back).
Much better then F R' F' R. Mine It's basically the same but you don't use two F moves.
10x for the tutorials. Leaned a lot from them and I continue to watch them :)
tq paradox my old record is 43 sec and now i was watched your videos and i got my new record it is 18 sec !!! thanks paradox
This is all stuff I need to work on after I finish learning the oll and pll. Right now F2l and the cross are what is slowing me down the most.
Yeah that's what you should do.
well thanks for the video it will definitely help.
Just few things to say here. First of all, you are a great teacher, great speedcuber and definetely deserve more subs, views, likes etc.. Second, CFOP method is actually not that hard once you get the hang of F2L, as it took me 1h straight to just figure out how to solve F2L, and now I can do it constantly (only problem is that I need to use more finger tricks and no cube rotation), and third, heck yeah, 2-look OLL and 2-look PLL are both easy to learn but take more time, so instead what I did, was set up each of the cases by removing pieces from the cube and rearranging them to corresponding case, and for each day I repeated each algorithm over 100 times. In less than a month, I learned full OLL and full PLL which got me under sub 10 time (nope im not participating in contests yet) and my PB is 7.26 secs (7.261 more clearly), so im developing my method of solving cube, which would do F2L and OLL in the same time (yes sounds impossible, but I've researched), so after I finish, I would personally like to PM you and give you instructions on ACFOP (Advanced CFOP) and I want you to test it out. If learned all algorithms properly (I've developed 72 of them so far, with 30 exceptions that need to be put to the test, and over 20 more added) the cube could be solved in less than 3 seconds. If I manage to do cross + F2L OLL PLL (orienting and permutating last layer included with F2L) that would give cubers an average time of 2.5 secs (if as fast as Lucas Etter). Thanks for reading, and GL!
Havlic GD Whoa
U smart, very smart
Agreed
Mats Valkyrie uses a series of algorithms to do OLL before inserting the last F2L pair, it’s like 200+ algs I think, but there’s something called Winter Variation that has less algs so it’s easier to learn, but takes longer to perform.
Hey Paradox just wanted to say that loved the tutorial and the look ahead strategy for looking at the cube as a whole really opened my eyes and helped me look ahead a lot better. Thanks.
Hey I'm a beginner cuber, at 4:40, can you just solve that edge piece the beginner way? I normally do that and I think it saves time and is much easier
the insertion with left were already in my style but the algs are pretty useful thanks man :D
Hey you have great tutorials, thanks so much! I was wondering, what stickers do you use? I really like the colors
0:56 just wondering whats the point of those algorithms when you can do R U` R`
this is legit the best vid
thank you so much
On th F2L pair at 4:40, instead of bringing the corner up using, breaking up the pair, then inserting it, why didn't you just do UL'U'LU'B'UB? It would have inserted the edge faster than doing the F2L case for that?
0:54
Just trying to visualize here, but wouldn’t U’ F’ U F work here as well?
Or am I not visualizing this correctly? lol.
Is there any particular reason you can see why doing it with the algorithm you’ve shown would be advantageous? (Not being argumentative lol, just relatively new to the cube and trying to understand and get other perspectives.)
you did it again paradox...thank you!!!
Thank you you helped me to figure out what a sledgehammer actually does.
lol
You have the best cfop vids thank
another tip i"ve found is doing wide turns sometimes instead of cube rotations, especially if you needed to do that turn anyway
my average is around 35 secs and my pb is 24.7 i know 2 look pll and oll. How can i improve my time? do u recommend me to watch your f2l algorithm video? Also i just ordered a stickerless zhanchi, Is it a cool cube?
I recommend learning more PLL algorithms and working towards full PLL, you can also learn some easy OLLs as well. Also yeah it might be useful to learn some short quick F2L algs to make your F2L more efficient, but I would say mostly work towards full PLL. And yes, the stickerless zhanchi is a great cube, my first speedcube :)
thx
+ParadoxCubing Thanks man, that's really useful, both the video and that nugget of info.
+ParadoxCubing Me too, my average is 35 sec, but i think my f2l is slow.I looked at timer couple times,and i finish my cross and f2l in like 25 sec.I think that time is bad.
Nemanja Vasic my avg is around 16 now how about you?
your teacheing method is superb.. 👌👌
1:27 the algorithim is actually r U R' U' M
Yes !
RubCuber it's not, the middle follows the same notation as the right side, the algorithm was right
Mr Moo no it wasn't. M' moves move like L' moves.
Cranberry Juice oh ok
I thought si
best cfop tutorial ever
Sometimes it is better to cube rotate only if u have really good look ahead and can visualize which positions would make it easiest to put in
True
I know it's 6 year ago and it's 2020 now but I tried to solve in cfop and tried to be the best on our country so I practice alot but I like this tutorials
i started cubing 2 months ago average 1 min 6, pb: 48 sec. your vids are really helpful, so thank you very much! I just have one question at 3:00 you insert the red and blue pair. Can you tell me why you use this algorithm instead of using sledgehammer?
very nice video man. How would u do if orange would be in front of u at 2:30 ?
Wow this blew me away. Thanks so much.
The m' in your second example is actually a m
Yeah, you know what I meant though.
ParadoxCubing thx
At 4:56, when you did the 1LOLL algorithm, you did a U2 AUF and did l' U' L U' L' U2 l. Instead, what you could do is r' U' R U' R' U2 r without doing the U2 AUF. I'm quoting you, "so it's the exact same moves except you're doing it with your left hand". Only in this case, you're doing it with your right hand. I know OLL doesn't matter in this video but still.
I'm not sure if you check this video much anymore, but I do 2 look oll, and pll. If I wanted to learn full OLL and PLL should I learn PLL first? Or OLL? Cause for OLL I have an idea to learn all OLL's. To learn how to do OLLS from the L on the cross, the line, and the single middle piece, since I already know the yellow cross's OLLS.
can you make an advanced tutorial for OLL and PLL ?
Yeah I've been meaning to make them, I just need to finish up some videos I'm currently working on.
ParadoxCubing Can you link them here?
+ParadoxCubing can i get one of your cube please i will like all of your videos
+ParadoxCubing u never made a advanced oll
+William Chua stop acting like a good for nothing beggar.buy yourself a cube, or just live with the fact that you don't have one.
Can anyone please tell me the left version of the algorithm at 9:00? Thanks.
Oh thanks for replying that fast, so i have done everything for the contest :)
What is the algorithim in 5:00 ? I really need ittt
Thank you
Something weird for me is that the cube rotation thing, I never used those. When i first learned f2l all algorithms I saw didn't have any cube rotations, except for 1. This video helped me. Also I guess being both handed is good (I forgot how to spell the neutral handed word).
When are the Advanced OLL and Advanced PLL coming out?
Ya?????????
Basically all that consists of is full OLL and PLL, and perhaps a bit of some alg sets like COLL.
nice vid! the end of your video made me want to go watch some Reckless Tortuga vids tho haha
I feel like every f2l tutorial is so bad and it's not just this guy it's all the people who make tutorials for it
Good tutorial. I used left hand and sledgehammer (F R' F' R) but the backwards insertion really helps.
The first case (start of vid)
Just dont rotate and do
U' F' U F
3:05 Do this instead (no rotations)
U' B' U B
With beginner method my best was 0:43
With this new advanced f2l I have 2:00+
I can't simply adjust. Any advice
Practice a lot slowly , then try a little bit faster each time
Dyllan Llagas Keep doing it and practiise, At first it will be slow but then you will improve.
My PB is 36 s with a very normal cube and I am trying to improve it
nice, my pb is 19 xd
Nice,my pb is 15
Aw man! My phone is 37!
Mines pb is 9.506
For some reason I'm averaging a 1:00.00. I've followed all your directions and I just can't get that fast... How can I get faster?
Try using this tutorial to get a clearer representation of F2L: CFOP: F2L for Beginners
i was at the same stage as you a couple of months ago just practice recognize your f2l cases faster all these things will help but mostly practice im now sub 30 because of paradox :))))
I already have watched this video, but I used 2-look oll and now my times have gone up to 40 seconds! Thanks!
If you use the best methods then all you need is a lot of practice.
for the algorithms you give us, sometimes they come out on the left side. Am i supposed to just do the opposite of the algorithm? if so then if it is asking for the front face to be turned F' would i do B? also for the algorithm F R' F' R on the left side would i do B' R B R'. i tried both ways neither worked, i may have done them wrong.
At 1:24, isn't that M not M'? I don't mean to be rude, I just am not sure myself since I'm fairly new to this :)
0:24, a real easy move for this one is to do a lowercase d' move, and then just insert it with L' U L
Yeah but lower case d moves are sloppy and slow down your fluidity in a solve.
I have forty average and this video really helped me beacause i a noob in f2l
2:37 what oll was that? thats not a possible oll! You probably had a corner twist or something, cuz the all the white coners were solved, and one yellow corner wasn't oriented properly.
where did you get your stickers? They look nice. I want to test out what florescent red would look like. 'Cause my preferred color scheme is, Red/Orange or the new YJ/Moyu tangerine/coral type orange. Yellow/White/Black. Green/Florescent green/Lightblue or birght blue
This was Izo Stickers Super bright set. Unfortunately puzzleaddicitions got shut down, if it ever re-opens again then make sure to check it out. It's the same as thecubicle full bright stickers, but the blue is called sky blue.
ParadoxCubing yeah I knew of Izo... I hope he post his video soon. He started Cubing YT channel the same time I did. I use to get a lot of praise because I was the only female cuber at the time on YT and I was fast. But now 5-6 years later, more female cubers and everyone is faster than me lol. But I heard that he is only going to be selling stickers when his site is up and running again.
ArtsyCubenerd Yeah I know that already, it's going to be called Izofactory
Any tips? I use too look Ll and f2l and takes me a minute. Good thing I ordered a gans356 um
Bro i need your honest opinion. yea im really a beginner in F2l but i memorize or rather master all PLL and OLL. How long do i have to take to master all of your f2l tricks?
What cube is he using?
Fangshi
Rubik's
The person ubove me is dumb
@@alvinlucero4734 wau, verry gud cube
yay! great job on this tutorial, too bad I already know all this stuff :(. I wonder what I should do next to improve my times, I average around 30 and my pb is 19 and I do advanced almost intuitive F2L but with pretty bad look ahead, 2 look PLL and sloppy sometimes 4 look OLL. any advice on what to work on next?
I would recommend learning full PLL at this point, and some more OLL cases, then practice more on look ahead and other cross and f2l techniques.
Yeah I'm working on my PLL these days so that's good, and about the OLL how many cases do you think I should learn? I consider myself a fast learner, I mean I can learn even 3 algs a day of PLL for example but I won't be able to take the case and figure out the algorithm for it fast it would take me time to recognize the case easily. Oh and about the cross, I do fairly it well (advanced) right now so I think working on my PLL and OLL would be better for now. Anyways, thanks for the help.
I know around half of the OLL algorithms (or maybe a bit more) so I would recommend learning like half at the same time as finishing learning full PLL. Go for the ones that dont have any edges and just corners oriented, since those are 3 look. Hope this helps and good luck!
Just one question, does fast beat music help you solve the cube faster....i have heard people talking about it. If yes, can you suggest some?
I'm currently learning Full OLL and I know Full PLL and some F2L cases, I'm really slow at F2L and I usually get pauses to look for pairs, am I not using my Inspection time wisely or do I need more practice?
Cythotheking's video on lookahead is probably the best lookahead video on the internet
Please upload the videos of advanced Oll and Pll
Uhm at 1:33 that is M not M' cause it goes with the direction of L
M' is up. M is down.
***** No, it's L. Slice moves are weird like that.
Yeah it follows L. It's stupid in my opinion. It should follow R like x
XESCoolX Agreed. Plus, E follows D instead of U, but S is normal, following F.
***** S is normal? oh wow I didn't know that! I assumed it followed B
So does M follow L or R? I thought ParadoxCubing was a decent cuber? How can he get it wrong?
I don't know full cube notation for this reason exactly! Different websites say different things! What's the true notation?
+Paradox Cubing i have a question... It takes me around 30-50 seconds to solve the rubik's cube by using the beginner's method.Will it make me faster to solve it if i learned this CFOP method and by how much time?
It definitely will. you can get sub 20 without problems by just practicing
oh ok thanks!! :)
I wanna know how people can do beginners method that fast! when i first learnt it, I didnt practice the method, just went straight to cfop, cfop pb is 28.18 and I've just done beginners method, took me over 2mins! haha you should definately switch if you havent already, you'll be sub 10 in no-time!
I think I made somehow my cube sticky a little and it makes me nervous, any ideas how to clean it without damaging my stickers? :)) Btw I have Moyu Aolong V2
Also, as much as I remember you said that for beginners you reccomend a cube with not really good corner cutting to make your turns more accurate, I have that problem so what cube do you recomend me to buy for faster TPS?
Hey, I have learned all the algos for f2l and I wonder if it´s bad to use lower case d moves to basically rotate the cube? Using the algos on the back is so difficult since you have to insert the algo in your brain first..
Sorry, but. I'm a cuber, use CFOP but just want to know what is lowercase r or l
Also for middle, is counter clock wise flicking it up?
I thought the cube rotation advice was stupid but it got me to sub 30
Paradox, can you tell me how you record? I'm doing Rubik's cube tutorials as well, but I can't figure out how to set up my camera.
Tripod in front of body
I've just started with the advanced method and I'm currently learning the F2L. I just managed to solve the F2L without turning the cube once. The downside was that I had to use F and B moves a lot. Especially when inserting a pair on the backside, where you cant see. Is there a way to minimize the changes in hand position? Is it possible to insert a pair on the back side without using B moves?
i know a good amount of f2l but no pll & oll, pb 35.67, avg 45
what should i work on/start learning to improve more?
Advanced cross, good f2l,1 look oll, 2 look pll
which cube do you use? I want to buy a speed cube and my avg is 25s. I am confused.which one to buy?
Idk if it counts as a cube rotation, but usually I drag the layer or two layers with me so it does both in 1 move. It seems fine to me but I'm not a pro by any means
one of my biggest problems is finding the pieces and recognizing each case. how do you find the pairs so quick?
hi my friend . I know two mather 1 is nomel 2 the f2l
but when I put the timer the nomel mather take time 01.00 minutes
and with f2l it take 02.00 minutes
what I should so ?
I have seen your all videos on f2l .
Please, add algs on description :)
recommend to do the advanced oll pll also because i got the beginners one
What cube is it please? Especially interested in the stickers. What shade of blue?
1:27 You did M but you said M'
time for an advanced oll & advanced pll video
Any algorithms for when the edge piece is in the right spot (middle layer) but the corner is somewhere in the top?
you have M and M' swaped. M follows the L side
My f2l is slow because I’m always trying to find and make a pair and a big thing is how do I do it without messing up my previous pairs that are in?
The important part is creating pairs without rotations too
The algs u re using not only for f2l but for oll and pll also are from a single site (if yes which one?) or from various sites and vids? I m just asking because the site I m using (cubewhizz) has only one type of alg for f2l for fr...not all 3 u just used :P and so I have to search for rare vids like this one to find the rest of them. In any case thx for the vid it was really helpful!
I got those algs from an algorithm app on android. There a lot of different algorithms and various websites and videos have them too.
Try solving f2l while you solve the cross. That can increase your time.
Why would you want to increase ur time??
+Rubiksmaster301 - cubing and LEGO For fun or if you're at a competition.
+THE X-TREME TEAM maybe decrease?
do you mean DECREASED? lol?!
Kropster My bad.
I don't agree with the first one, doing a sledgehammer is slower than a cube rotation and inserting in my opinion because it requires a regrip. Maybe it's just my execution
Please reply me. I am beginner cuber and i just use a random or a regular cube like its not a speedcube and my average is 2mins and i am buying Qiyi Big sail 60mm so is it a good cube for me. I am beginner. Please tell me and give me some suggestions.
men how long did you actually master speed solving the 3x3 pls. reply cause im having troubles in solcing f2l
Hey, I figured that youtube is a pretty informative source so can anyone help me? I use beginners oll and beginners pll. I'm trying to learn f2l and it's pretty hard because it takes forever for me to do. My best time is 1:04 without using f2l. Does anyone know a way for me to solve faster? Do I learn advanced oll or pll or try to learn f2l better? Sorry for all the questions.
what do i do if i have to do an algorithm but the space in the front for it is filled or i need to do the algorithm on the side?