Encyclopedia of mechanical knowledge your father is Keep listening and watching you'll learn so much,you've already learned a lot ,watching your videos years now Keep it up
Very interesting video again, father Phil is a really knowledgeable man round the workings of a massy, so looking forward to seeing the tractor up and running, good luck guys 👌
Father Phil is one of the smartest fellas. Phil I like how you guys work together the farm is taking shape. Hard for one man to do everything. Can't wait to see the tractor fire up .
Were a little bit late will have to watch tomorrow night . Looks very interesting 😜 . Will be just what we need after a stressful and busy . Good luck.🎄🎄🎄🤶🤶🏵️🤶🤶🤶🏵️🏵️🏵️🏵️🏵️
Great video Phil I could sit and watch father Phil all day around tractors no doubt he will have it running for Sunday and bro will have good tractor to look after next year happy Christmas and new year to you all hope uncle Ian is doing well
You had your list for Santa Phil that poor tractor was lucky there was anything left on it Father Phil is some well of knowledge he would tackle anything Happy Christmas to you all in Longford and special regards to Uncle Ian I hope he recovers to full health for 2022
Phil you should consider putting a pit right inside the door in that shed for servicing tractors etc. You can board it over then when not in use. No workshop should be without one.
How wonderful! To be in a position to be able to give Bro a tractor. I hope that he was there as you put it back together. Phil is learning but was Bro? I hope you’re putting in new seals around as you’re putting it back. What a wonderful place to shop for parts. Here’s wishing you all the best in the New Year. 👏 new seals
It will be a bloody good tractor and it has good tyres too it always seems like you are always in need of another tractor so this will be a good return to the fleet
Nice to see the tractor getting fixed never have enough nice to have one you can jump into and keep going when your short of time. Father Phil loves to get you going . See you in the next one . Snowing here in the USA and 14 F out side !!
Farmer Phil and Father Phil Brilliant video If I can be so rude as to make a couple of suggestions I don’t know much about modern Masseys , but I know a bit about the Hydraulic pump such as you are replaced which is a Piston type Variable Displacement swashplate pump with likely an electrical control valve My suggestion is that I would have Murphy’s open your old pump and check out if there’s mechanical damage also your charge or scavenge pump as you call it would need to be checked also But I would at least check for mechanical damage to your old pump in case any metal filing went through the system as the filter will only pick up materials upside of the pump The greatest enemy of hydraulics is introduced dirt from dirty trailer rams etc Best of luck with job No Rush If you look charge pump on google there lots of information, but I guess you have checked that out It’s good to have a Hydraulic schematic in order to see where the oils coming from and going to
Christmas came early this year for Father Phil .Walking around the Murphy Massey Warehouse was obviously a "RED" Letter Day!!! It's marvelous how quickly 5 or 6 years can go by, when you are busy..... Great vlog, Phil, and I hope all goes well with the resurrection, I would love to see Bro, whooping and 👍😂 ar hollering, driving it out of the workshop!
Nice one Phil & Father Phil, so i know we all learned to change oil & fix an air lock & some other stuff, but where does Father Phil's knowledge of engines come from
Nice to see the 6290 get some attention, it's deserved 😁 Quite exiting to see Whats going into the workshop next 😁 To bad the pallet of time got missed 🙃
Hopefully get to see a few videos of toys fixing it putting it back together do love seeing them type of videos especially the way you’re father describes everything it’s really interesting and fun to watch Merry Christmas to all the Stewart family 🎄🎅
Ah your dad is some Welsh of information and he is a gas man, he sure can rise you phil . It just great to see the relationship you have, cherish it they are memories that will last a life time . How is uncle eion doing, I hope he is doing OK
can you please do a video on the bird scarer in your yard. would be very interesting to here your views. we have a hell of a problem with crows and starlings.
great to see the 6290 getting sorted father Phil looks like he's in his element looking forward to seeing her beating down the road best of luck with her Happy Christmas to you all and best wishes to uncle Ian
There is only one father Phil. !!! You will need to explain the comment, slipped in there, about you and the problems with barrels ? The knowledge father Phil has, is 2nd to none. If you look back at the video. In the section that is speeded up. That’s how father Phil’s brain works. Always about 10 steps ahead, in thinking, what next and what if. Bro better mind this baby !!!
Great video again Phil , you and farther Phil put up some interesting videos farther Phil knows his stuff about mending tractors and machinery hope uncle Ian is doing okay
My neighbour (now retired) always had 3 fiat 110-90’s, 3 fiat 680’s and 3 fiat crawlers (i forget what model), purely to run them until they broke, and then once one went it kept the other two going, i remember there always being a 680 in his hedge with just the body and wheels left on it, all the cab glass and engine parts where stripped. But without a fiat dealer local (he had inherited most of the tractors from an uncle on the other side of the country), that was how he kept the fleet going.
Congratulations this is the moment everyone has been waiting for 😂😂
Your father is so smart on all those parts, learn what you can from him.
Father Phil is a legend!
The right job when father Phil says if he damages it he has to fix he will learn alot from it
Great video, great back story to the 6290. Good to see what’s in Murphy’s shed. Keep up the good work.
Love this video Phil. Father Phil’s knowledge on Massey Ferguson is unreal, especially as it’s all self taught. Some man👏🏻
I think father phil could nearly be the Irish version of fred dibnah 😊😊 great video lads
Thats a fact right there . 100% !
Eric is lucky to be getting such a nice tractor, its looking well
Said it before and I will say it again father Phil is a genius
There is no words to describe how much of a genius father phil is. He needs his own podcast 😂👍🏻
What Keith Murphy and his dad don't know about Massey, isn't worth knowing. They are extremely knowledgeable and even more helpful. Top men.
Good to see her getting put back together....... them red yokes do give bother 🤐😂
Everyone’s been waiting for this I think this tractor needs to be called trigger when it’s fixed 😂
One of my favourite tractors the MF 6290 cannot wait to see her run.
Encyclopedia of mechanical knowledge your father is
Keep listening and watching you'll learn so much,you've already learned a lot ,watching your videos years now
Keep it up
Very interesting video again, father Phil is a really knowledgeable man round the workings of a massy, so looking forward to seeing the tractor up and running, good luck guys 👌
Father Phil is one of the smartest fellas. Phil I like how you guys work together the farm is taking shape. Hard for one man to do everything. Can't wait to see the tractor fire up .
Dad is A PURE GENIUS. I doubt if Massey Ferguson have a man with his knowledge anywhere in the world 🌎🤔😳. Great video again Phil.
Excellent video Phil, great to see your getting another 62 series up and running again
Were a little bit late will have to watch tomorrow night . Looks very interesting 😜 . Will be just what we need after a stressful and busy . Good luck.🎄🎄🎄🤶🤶🏵️🤶🤶🤶🏵️🏵️🏵️🏵️🏵️
Fair play lads for doing such a great job on the 6290 great stuff
Ah brilliant stuff lads , iv been waiting on this for a couple of years, it'll be like a new tractor when you're finished 😀 👍
Great video Phil I could sit and watch father Phil all day around tractors no doubt he will have it running for Sunday and bro will have good tractor to look after next year happy Christmas and new year to you all hope uncle Ian is doing well
Great video Phil, love to see you and father Phil working on a Massey project together
You had your list for Santa Phil that poor tractor was lucky there was anything left on it Father Phil is some well of knowledge he would tackle anything Happy Christmas to you all in Longford and special regards to Uncle Ian I hope he recovers to full health for 2022
Great video Phil will be great to get her back running just love father Phil’s stories
Looking forward to seeing the tractor finally running 👍
Phil you should consider putting a pit right inside the door in that shed for servicing tractors etc. You can board it over then when not in use. No workshop should be without one.
Looking forward to see going bro will mind it like a child . Fader Phil will get it going no fear
Father Phil and the Ginger warrior the best farming dads on RUclips and Phil your have to get the 3690 over for olly's tractor run next year
How wonderful! To be in a position to be able to give Bro a tractor. I hope that he was there as you put it back together. Phil is learning but was Bro? I hope you’re putting in new seals around as you’re putting it back. What a wonderful place to shop for parts. Here’s wishing you all the best in the New Year. 👏 new seals
The tin work looks really good on the 6290. Should be a good job
Father phils is a absolute legend i could listen to him non stop TOPMAN great video
Great video Phil always loved the machinery god bless you all stay safe 🙏 🇮🇪
Great video phil, good to see your and father phil back in the workshop , merry Christmas to you all.
He is some man for one man knows his stuff
Father Phil he is some man for one man great video phil 👍
Father Phil is the man for the job
Can’t wait for the update on this one. Garage looks great. Finally a space to work in comfort on all the repairs. Love the videos.
It will be a bloody good tractor and it has good tyres too it always seems like you are always in need of another tractor so this will be a good return to the fleet
Great video guys, would love to see more of father Phil explain about the workings of the hydraulics. Keep up the good work and happy Christmas.
father phil knows his stuff
Great video phil.
Your dad is a legend of a man
Nice to see the tractor getting fixed never have enough nice to have one you can jump into and keep going when your short of time. Father Phil loves to get you going . See you in the next one . Snowing here in the USA and 14 F out side !!
Great video and can’t wait for the follow up Phil
Farmer Phil and Father Phil Brilliant video If I can be so rude as to make a couple of suggestions I don’t know much about modern Masseys , but I know a bit about the Hydraulic pump such as you are replaced which is a Piston type Variable Displacement swashplate pump with likely an electrical control valve My suggestion is that I would have Murphy’s open your old pump and check out if there’s mechanical damage also your charge or scavenge pump as you call it would need to be checked also But I would at least check for mechanical damage to your old pump in case any metal filing went through the system as the filter will only pick up materials upside of the pump The greatest enemy of hydraulics is introduced dirt from dirty trailer rams etc Best of luck with job No Rush
If you look charge pump on google there lots of information, but I guess you have checked that out It’s good to have a Hydraulic schematic in order to see where the oils coming from and going to
re bonjour encore une belle vidéo , impatient de le voir tourne 6290 bon courage a vous pour la suite 😍👍👍👍
It will be great to see that back working and I bet you bro will keep it spotless
all the best to your uncle Ian, hope he's keeping well. Loved Father Phil's reference to the pallet of time toward the end
Hello you are very good farmers and mechanics with your father, good job! Cheers from Slovenia.
Big job phil and father phil be worth it when finished take care
Was waiting all day for this love the workshop videos
Merry Xmas to you and your family from us all in Northallerton north Yorkshire another good video as usual
It will be good to see 6290 up and running again but i think father phil should get bro to put her back together 😂👍👍
Fantastic video Phil an easy fix enough I always thought it would have to be split to access the pumps
Christmas came early this year for
Father Phil .Walking around the Murphy Massey Warehouse was obviously
a "RED" Letter Day!!!
It's marvelous how quickly 5 or 6 years can go by, when you are busy..... Great vlog, Phil, and I hope all goes well with the resurrection, I would love to see Bro, whooping and 👍😂
ar hollering, driving it out of the workshop!
Great vid Phil great content looking forward to the next instalment and yes father Phil is a legend
Best vid yet!! Buzzing for sunday 😃😃
Well done men, another great video. Looking forward to the video on Stephen’s Day.
Merry Christmas farmer phil and have a healthy New year
Great to see her getting fixed best of look to bro with her a fine rig I'd say he will mind it well
Nice one Phil & Father Phil, so i know we all learned to change oil & fix an air lock & some other stuff, but where does Father Phil's knowledge of engines come from
Great video Phil ,that father Phil is some man
Nice to see the 6290 get some attention, it's deserved 😁 Quite exiting to see Whats going into the workshop next 😁 To bad the pallet of time got missed 🙃
Yehhhh bro is gonna love it 🤣🙈🤣 25:25 farther Phils enthusiasm !! 🤣🤣. Lets hope the radio has blue tooth or he won't be happy
Good luck with the tractor Father Phil is some fella wi the spanners
Have a great Xmas , from Ian ,Chan, Audrey and Leo , from Dunedin in New Zealand , luv your u tube channel 🤗
Hopefully get to see a few videos of toys fixing it putting it back together do love seeing them type of videos especially the way you’re father describes everything it’s really interesting and fun to watch Merry Christmas to all the Stewart family 🎄🎅
Ah nice to see her going again good video 👍
Excellent video Phil, that is a fine tractor. , when it is fully repaired , i would say there is a lot of work left in that machine
That's fantastic, well done.
Hope use have a great Christmas and a prosperous new year keep up the great work
Nice one
You and Father Phil must have been like kids in a toy shop at Murphys Massey Salvage. Great video.
Fair play to ye getting her back going
What a man.some knowledge. Thanks.
Ah your dad is some Welsh of information and he is a gas man, he sure can rise you phil . It just great to see the relationship you have, cherish it they are memories that will last a life time . How is uncle eion doing, I hope he is doing OK
can you please do a video on the bird scarer in your yard. would be very interesting to here your views. we have a hell of a problem with crows and starlings.
Bangor is the only thing that works. The bird scarer works for a while till they get used to it
Keep us up to date on the bulls.
Absolutely brilliant keep up the good work & Merry Christmas to you all .
great to see the 6290 getting sorted father Phil looks like he's in his element looking forward to seeing her beating down the road best of luck with her
Happy Christmas to you all and best wishes to uncle Ian
Well done lads. 👍got a few parts from the murphys over the years. Excellent lads to deal with.
Be great to see tractor rolling
Big deadline to make, best of luck!
Great video again phil and father 🚜🚜🌲🌲😊👌
There is only one father Phil. !!! You will need to explain the comment, slipped in there, about you and the problems with barrels ? The knowledge father Phil has, is 2nd to none. If you look back at the video. In the section that is speeded up. That’s how father Phil’s brain works. Always about 10 steps ahead, in thinking, what next and what if. Bro better mind this baby !!!
Keep er lit lads , could listen to ye all day , merry Xmas to all the family !! Looking forward to st Stevens day 💕💕
Great video again Phil , you and farther Phil put up some interesting videos farther Phil knows his stuff about mending tractors and machinery hope uncle Ian is doing okay
Fantastic, go fellas , get it done before Xmas... good luck and look forward to the video..
Great video boys can't wait to see it running : )
Good video Phil
Great video once again how is your uncle Ian?
Great video. Merry Christmas.
My neighbour (now retired) always had 3 fiat 110-90’s, 3 fiat 680’s and 3 fiat crawlers (i forget what model), purely to run them until they broke, and then once one went it kept the other two going, i remember there always being a 680 in his hedge with just the body and wheels left on it, all the cab glass and engine parts where stripped. But without a fiat dealer local (he had inherited most of the tractors from an uncle on the other side of the country), that was how he kept the fleet going.
As the old saying goes better later then never.happy Christmas to you and all the family.🚜🐂🇮🇪🌲
Best of luck, looking forward to hearing that engine purring.
Savage video can’t believe the pallet of time finally came hopefully no potholes in the road come up before st Stephans day great video 👌👍
Good stuff Phil 🙂
Great video Phil