Yep, it's the rubber vacuum tube on the driver's side manifold down under the brake lines that will come off. It controls the blend doors to change from defrost to the other settings. I had that problem before and today. Check that first before you take anything else apart. It's fairly easy to get to on my 2002 4.0L engine. Take a dab of Flex Seal and put it on the manifold tube to hold the rubber vacuum tube on. Do not get any inside the tube. When the Flex Seal dries it should hold so the rubber vacuum line doesn't come off again.
On a 5.2 V8, I found the vacuum line that goes through the firewall to be under the top heater core line (big line). I use a new fuel line hose (3/32" which is a snug fit) to reconnect both ends of the vacuum lines. Heat gun each end of the fuel line so that it can easily stretch and go over the vacuum lines.
HAHA! Mine has the exact same cut tube! I thought it was the problem. These Cherokees are great vehicles, but I guess nothing lasts forever, always gonna have weird little problems pop up. Thanks for the help!!
helps a lot actually, I had mine default to defrost. not that bad considering its winter, but my value line is rotted half way through at that T connector. also that line goes into the fire wall at the same spot that those ac lines go in.
YES! This shit actually does work atleast it did in my 98 jgc 5.2 motor thanks for getting straight to the point and showing where the shit was and not making no gay ass irrelevant long speach !
Just had to do this for my 1998 Grand Cherokee ZJ. I found the vacuum hose and it's seems good, but not sure why the air won't blow through the vents. At least this temp fix will get air into the cabin. Next have to get the ac recharged for cold air. Sheesh
Lost - N - Found LOL SOUNDS LIKE U FROM THE HOOD CUZ I HAD 2 INDIVIDUALS HAVE ME DO THAT ON THEIR'S SINCE THEY WEREN'T TRYING TO SPEND $ ON REPLACEMENT PARTS.
CAN SOME ONE PLEASE HELP... I had this exact problem in my 1997 grand Cherokee I did what he did in the video and it worked perfect in a pinch. But now I have fixed the vacuum line and I need to get the actuator rod back on the arm. I have tried glueing it back ziptying everything and it just won’t stay together. I need to find a replacement for the plastic white arm that the rod connects to and figure out how to remove it thanks for any help. The white arm that controls the defrost/vent is what I need to find
Tie wraps will probably not hold.. without going to the junkyard and retrieving one..the only thing I can think of how to fix it is.. take the accuator out from under the dash so that you can work on it.. drill a small hole in the end of the rod where it sticks through the white connector... Put the actuator back in place with the rod back in the connector..then place a small washer on the end of the connecting rod..then where you drill the hole put a small piece of wire to hold the washer on, and that should hold it in place very securely.. hope this helps..
Yep, it's the rubber vacuum tube on the driver's side manifold down under the brake lines that will come off. It controls the blend doors to change from defrost to the other settings. I had that problem before and today. Check that first before you take anything else apart. It's fairly easy to get to on my 2002 4.0L engine. Take a dab of Flex Seal and put it on the manifold tube to hold the rubber vacuum tube on. Do not get any inside the tube. When the Flex Seal dries it should hold so the rubber vacuum line doesn't come off again.
Thanks for the advice., you save me lots of money and work 👍
Do video😢
@@CarlosPerez-ne6ul Yes, please do a video! 53k views must mean this is a common problem with these vehicles.
please do a video
Thanks for making this video, just saved me a few hundred bucks. Thank you kind sir!!! May you win the lottery 🙏
Thank you!!!! It’s getting to 100s here in Chicago life saver thank you again!!
Thanks but how do you put the metal rod back on
On a 5.2 V8, I found the vacuum line that goes through the firewall to be under the top heater core line (big line). I use a new fuel line hose (3/32" which is a snug fit) to reconnect both ends of the vacuum lines. Heat gun each end of the fuel line so that it can easily stretch and go over the vacuum lines.
I'm south of Phoenix so not as hot but still hot so that's a badass and serious quick fix thanks man
Glad I could help Bud
HAHA! Mine has the exact same cut tube! I thought it was the problem. These Cherokees are great vehicles, but I guess nothing lasts forever, always gonna have weird little problems pop up. Thanks for the help!!
Hey! Thank you very much!!! You saved me hours and hours, and probably saved other people thousands of dollars.
Dickinson58601 Living In Dickinson North Dakota No prob ..glad I could help
Good stuff.
the vacuum hose goes in right along the heater/ac hoses
helps a lot actually, I had mine default to defrost. not that bad considering its winter, but my value line is rotted half way through at that T connector. also that line goes into the fire wall at the same spot that those ac lines go in.
Dude you saved my life my AC works great now👍🏽
Glad I could help
It's about to be summer. You, sir are a genius and a life saver!
Beauty thanks. Much appreciat it brother. (96 grand Cherokee loredo)
thank you so much!!!!! Phoenix heat aint no joke
YES! This shit actually does work atleast it did in my 98 jgc 5.2 motor thanks for getting straight to the point and showing where the shit was and not making no gay ass irrelevant long speach !
You are the man!!!!! You just helped me so much
I was freezing !!!
Thankyou
Just had to do this for my 1998 Grand Cherokee ZJ. I found the vacuum hose and it's seems good, but not sure why the air won't blow through the vents. At least this temp fix will get air into the cabin. Next have to get the ac recharged for cold air. Sheesh
FREAKING LIFE SAVER!!
Great Quick fix! Thanks so much!
crim son .. glad I could help
Thank you for making this video! Very helpful.
No prob.. glad it helped..
Awesome video helped me a lot saved me money. Really appreciate the video
bmxpro82 you're welcome glad I could help
My friends add a fat rubber band to switch and go to valve it holds and it will stay guaranteed I did it no problem
Seriously thank you!!! But does it affect it in the long run??
Chase Rice it's just a quick fix... But it will last as long as you feel like swapping it back and forth manually
Chase Rice my son ended up putting a piece of wire on it.where he could swap it easier
Lost - N - Found LOL SOUNDS LIKE U FROM THE HOOD CUZ I HAD 2 INDIVIDUALS HAVE ME DO THAT ON THEIR'S SINCE THEY WEREN'T TRYING TO SPEND $ ON REPLACEMENT PARTS.
Thank you so much, gonna try this immediately
Thank you for this video!!
Thank you so much! It worked!
Thanks, helps a lot!
THANK YOU SOOOOO MUCH
Thank you, sir! You're a life saver!
You rock bro appreciate it!!!!!!’
Thanks
thanks good video
Plastic broke when trying to do this. Be Very careful. Age and plastic do not mix.
Hi there mine doesn't even want to go on so what could it be
Anyone know what size that vacuum line is?
CAN SOME ONE PLEASE HELP... I had this exact problem in my 1997 grand Cherokee I did what he did in the video and it worked perfect in a pinch. But now I have fixed the vacuum line and I need to get the actuator rod back on the arm. I have tried glueing it back ziptying everything and it just won’t stay together. I need to find a replacement for the plastic white arm that the rod connects to and figure out how to remove it thanks for any help. The white arm that controls the defrost/vent is what I need to find
Tie wraps will probably not hold.. without going to the junkyard and retrieving one..the only thing I can think of how to fix it is.. take the accuator out from under the dash so that you can work on it.. drill a small hole in the end of the rod where it sticks through the white connector... Put the actuator back in place with the rod back in the connector..then place a small washer on the end of the connecting rod..then where you drill the hole put a small piece of wire to hold the washer on, and that should hold it in place very securely.. hope this helps..
Thanks man I just did that! I broke the on clip when I was taking the actuator off but oh well thanks man
nep5rings I did the same thing and fixed the vacuum line gave you found a new clip I’ve looked everywhere??
*I WILL HUNT YOU DOWN AND BUY YOU A DRINK!*
This is awesome. My 314k mile Jeep is cold again!
How do you pop it off? I’m having problems with the first step
Probably just use a screwdriver or something
@@lost-n-found222 awesome it worked! Thank you so much
@@therealbeachboi9205 you're welcome I'm glad I could help 😊
Thanks