Try another way - Launch BIOS Utility and go to Exit Menu and then select Load Setup Defaults and save (F10) and exit BIOS and follow onscreen instructions, if any
I did everything in the video, and the ‘Boot Device Not Found’ screen came up again, so I tried this suggestion of Load Setup Defaults in BIOS Menu, but it’s just going back to the initial ‘Boot Device Not Found’ screen. Is there anything more I can try??
Wow ,thank a million for saving my documents I did apply knowledge and my computer is back with all my files you are indeed a scholar from Liberia west Africa
Check out the steps below: 1. Launch BIOS Utility 2. Select Boot Option > Secure Boot, if Enabled > Disable it, and save settings. 3. If you find the secure boot as Disabled > Enable it and save settings and reboot.
This could then be due to a loose or disconnected connection on the hard drive. You may need to check your hardware connections to ensure all hard drive connections are secure. For more information, follow official website: support.hp.com/in-en/document/ish_3053911-2842957-16
@@pcguide4u yeah i tried that. just didnt work. i also tried hitting f8 at startup to bring up the windows menu to just attempt the reinstall windows. my system wont even do that. good news. the f2 option where i run all of the diagnostic test. every single one passed. it doesnt look like i need a new harddrive. maybe just a new way to install windows i dont know.
After putting the code and enter , I see Internet rapid storage technology and I am asked to press control + I. The display shows reset disks to non raid.
It looks RAID mode is ON for your machine. I suspect you have a DELL laptop. This involves BIOS and other settings. I would suggest visiting a nearby tech store.
Most probably, then, this is due to a loose or disconnected connection on the hard drive. You may need to check your hardware connections to ensure all hard drive connections are secure. For more information, follow official website: support.hp.com/in-en/document/ish_3053911-2842957-16
Try with this - Launch BIOS Utility and go to Exit Menu and then select Load Setup Defaults and save (F10) and exit BIOS and follow onscreen instructions, if any
The F10 key in BIOS is basically to save the current values (in case the user makes any changes). In this case, it does nothing, probably no settings were changed. Alternatively, you may give it a try by connecting to a USB keyboard
Give it a try with the steps below: Launch BIOS Utility Select Boot Option > Secure Boot, if Enabled > Disable it and save settings. In case if you found secure boot as Disabled > Enable it and save settings and reboot
I have the same problem. The same message appears, but it requires a bios update to Windows 11. How do I do that? Can you help me?
I tried this, but for me even after doing this the problem is continuing.. can u tell some suggestions.
Try another way - Launch BIOS Utility and go to Exit Menu and then select Load Setup Defaults and save (F10) and exit BIOS and follow onscreen instructions, if any
I did everything in the video, and the ‘Boot Device Not Found’ screen came up again, so I tried this suggestion of Load Setup Defaults in BIOS Menu, but it’s just going back to the initial ‘Boot Device Not Found’ screen.
Is there anything more I can try??
@@thedoctorwho07 this is exactly my problem, ive literally been doing this for the past six hours and its still not working.
@sloreking3322 same problem with me
Same problem ded lakh rupee kharach krne ke baad ye dikkat aur ek uske touchpad se pareshaan toh m phle se hi tha
Legacy support is not showing in my system
Same here
@@vishalkulkarni3478 problem solve or not please help me
It didn't work for me. 😢
Wow ,thank a million for saving my documents I did apply knowledge and my computer is back with all my files you are indeed a scholar from Liberia west Africa
You're welcome. 🙂 Glad to hear.
After putting the code and pressing enter, it returns to the same thing
This is weird behaviour.
@@pcguide4u So what should I do
Whenever I click esc or F10 nothing happens even if I spam it or click it once do you have any suggestions
You need to check and make sure F10 key is the key to get into the BIOS utility
Thank you... was able to fix my laptop.
This is really good
You're welcome. Glad to hear!!
I don't have the legacy support ? Please do you know how to fix it
Check out the steps below:
1. Launch BIOS Utility
2. Select Boot Option > Secure Boot, if Enabled > Disable it, and save settings. 3. If you find the secure boot as Disabled > Enable it and save settings and reboot.
Not worked
What if the legacy support is already enabled? Any suggestion how to fix this? Thanks in advance!
This could then be due to a loose or disconnected connection on the hard drive. You may need to check your hardware connections to ensure all hard drive connections are secure.
For more information, follow official website: support.hp.com/in-en/document/ish_3053911-2842957-16
I didnt find legacy support, but once i exit without any changes, it fixed
Most probably, you must be using motherboard support only UEFI. But glad to hear that your issue got fixed
Thanks alot.
Most welcome! 🙂
Wonder if after you do that you get the message :ERROR: no boot disk has been detected or the disk has failed
On a black screen?
Probably, your system doesn't support Legacy mode.
Go back to BIOS settings and "Set BIOS to Default" > save settings > reboot
@@pcguide4u yeah i tried that. just didnt work. i also tried hitting f8 at startup to bring up the windows menu to just attempt the reinstall windows. my system wont even do that. good news. the f2 option where i run all of the diagnostic test. every single one passed. it doesnt look like i need a new harddrive. maybe just a new way to install windows i dont know.
How I use it on my PC windows 11
My window are started now thank you so much.
You're welcome 🙂
After putting the code and enter , I see Internet rapid storage technology and I am asked to press control + I. The display shows reset disks to non raid.
It looks RAID mode is ON for your machine. I suspect you have a DELL laptop. This involves BIOS and other settings. I would suggest visiting a nearby tech store.
Nthg happening after adding code and enter
it goes back to the same thing after i exit, what should i do?
Make sure you have saved the settings before you Exit BIOS.
What if legacy support was enable , and the problem does not go away
love you ❤ thanks
Happy to help! Thank you 😊
Life saver !!!!! Thank you
Happy to help! You're welcome 🙂
Thank you, it was a great help
You're welcome 🙂
I can't find legacy support option....(Hp mini) ..plz help
Can you provide the full model number of your HP Mini?
Thanks so much, this works like magic.
Glad it helped! You're welcome 🙂
Great Solution. Thanks for help
You are most welcome
How if the Legacy support is enabled cause i try this..its nothings change.. Please hel any?
Most probably, then, this is due to a loose or disconnected connection on the hard drive. You may need to check your hardware connections to ensure all hard drive connections are secure.
For more information, follow official website: support.hp.com/in-en/document/ish_3053911-2842957-16
Thank you so much sir🎉🎉❤❤
Most welcome 😊
thkyuui so much ill try again and again there is done my solved problem
Glad to hear that your problem got resolved.
What if legacy support was enable , and the problem does not go away
Try with this - Launch BIOS Utility and go to Exit Menu and then select Load Setup Defaults and save (F10) and exit BIOS and follow onscreen instructions, if any
Thanks uncle for this love you ❤❤
So nice of you! Welcome. 😊
How to replace the hard drive
To replace the hard drive, you need to visit a nearby store.
So what do you do if you press f10 and it does nothing?
The F10 key in BIOS is basically to save the current values (in case the user makes any changes). In this case, it does nothing, probably no settings were changed.
Alternatively, you may give it a try by connecting to a USB keyboard
I did the system check and in the storage tests it is showing no storage installed
What should I do? Is the storage device plug loose physically or some other problem?
If it is showing "no storage installed," then it is most probably due to loss of connection or hard drive connectivity issue (hardware)
What should I do if I don't have legacy boot order?
Try setting up your BIOS settings. Go to the Exit menu and select "Load Setup Default" and save it using F10 key.
how can u connect the keyboard ?
It's a wireless keyboard
Boot device not found error sir hp 15 notebook windows 11 hard disk chek all ready pass did not open seytam please solutions
I would advise you to set your BIOS settings to default once and save then reboot.
All most tray hardikis 100 presen pass not open laptop secure boot diseable all redy hardiks problem sir
After press number and enter still back to the first, boot device not found😢
How did you fix that ?
Set BIOS to Default and save settings.
Thankyouuu i can fix my lappy alr thankgod
You're welcome 🙂
I dont want the lagecy bios mod bruh-
Thanks so much ❤❤❤❤
You are so welcome
Dose not working this trick and problem not solve
Im not getting an option to enter any code
It's weird. Can you give it a try once again with the same steps.
Legacy support option notshow
Give it a try with the steps below:
Launch BIOS Utility
Select Boot Option > Secure Boot, if Enabled > Disable it and save settings. In case if you found secure boot as Disabled > Enable it and save settings and reboot
Thank you so much bro
Welcome 🙂
Omg your video the only one that worked thanks so much I appreciate you thanks again and I follow you now
I'm so glad to hear this. You're welcome and thank you for subscribing 🙂
Thank you
You're welcome 🙂
what if my laptop is a school laptop and it’s stuck on this can someone help me
If its provided by by your school, I would suggest to contact the school IT folks for this.
Thanks 😊
Welcome 😊
God bless you bro ❤
Thank you. 🙂
Love you gys ❤ my problem solved ❤
Glad to hear it! You're welcome 🙂
It works, thanks
Great! You're welcome 🙂
My problem is not fixed
Could you please explain a bit? If you followed the video, what happened after that?
What if legacy support is enable then also no opening plss tell ,🙏🏻
I'll look into this to see what other aspects can cause this issue
Why do you watch these fake videos they don't have any problems just showing the fake result that even not works a bit his accent is indian btw
I understand a bit of your frustration, since this solution might not work for you. However, the given solution is based on a real scenario.
Thanks 😂❤
You're welcome 🙂
thank bro
Welcome 🙂
Thank u 😂😂❤❤❤
Welcome 🙂
Thanks Sir❤
Most welcome