DIY Thor Mjolnir Hammer
HTML-код
- Опубликовано: 8 сен 2024
- Thors hammer, a really cool wood project, great christmas gift, its the corner block off a pallet, and a table leg i pulled from a skip, and a broom handle, then theres the not so simple part of using a laser on it for the engraving but its not that hard, you do have to have a laser unit of course but these are getting cheaper now and theres always the option of a pyrography pen
If you havent got a pallet block then grab an offcut of 4x3 or similar dimension.
Found a hardwood pallet with a decent block that hadnt split and then managed to extract all the nails so it could be cut. The new cordless Evolution was just about on the nail for doing the mitred cuts, had to flip it though to get through them properly as theyre fairly chunky bits of wood. Its a decent saw, accurate out the box and the multi material blades cut clean for quite a while when new. You cut each side at a an angle of 22.5 degrees, be careful how you handle the wood and the cut and your hands are in a good position in case you get a grab
Evo link tinyurl.com/47...
Sand your block off, i found a company nearby who had a load of 110v makita reds for 65 bananas a pop so i grabbed one whilst i could
Used the trim router to run a 45 degree along the 4 edges running long ways, this has now framed the block into the hammer shape.
Makita Red Belt Sander amzn.to/2NmDymG
Katsu Trim Router amzn.to/2YsqahK
I used the evil treadle lathe over a couple of days to make a handle out of a table leg, probably about 5 hours, ridiculous, exhausting, itd probably take about 15 minutes on the electric lathe but that would mean ive got to clean all the wood off it. Im sure many of you can relate here
I chopped a bit off a hardwood broom handle to make another handle. I used the powerfile here as well to turn the round into more of a square, the powerfile tool is a very versatile tool. Evo tinyurl.com/47...
Onto the lasering, a whole new ballgame, theyre really simple now, if you can use MSpaint you can use LaserGRBL and get a laser rocking and rolling very quickly. The Aufero1 is a very compact and accurate unit capable of good work. Ive got a video coming on that soon, ive had one about a year now so can review it at last properly. This took hours to laser and align properly because of its odd shape. Consequently some of the engravings arent straight and if youre going in hard and deep youve got limited opportunities for sanding it off and trying again. Thats a me fault on the alignment, the aufero laser engraver is highly recommended as is the support by the company. It is currently at an unbelivable cheap price if you buy direct
ORTUR Aufero1 tinyurl.com/s9...
Find the center on the bottom of your block and drill a hole that coresponds with the size of your shafts (oooerrr) diameter, a pillar drill is a great tool for this but it is possible using a hand drill and being careful
I kept it simple and just glued the handles in using 2 part epoxy resin, fairly tight they should be solid enough. You could use them as actual mallets and these are solid but theyre a bit too nice to use, or not, a tools a tool, your choice
The tung oil is a nice finish, just glug it on and leave it for 20 minutes, wipe it back, do it tomorrow and the next day. Youre supposed to do the first coat with a mix of white spirit to thin it and allow more to penetrate the wood but I alwasy forget or have run out of the stuff. Do that on the first coat if you remember too
And youre done? Unless you want to keep on going, maybe drill a hole in the handle and put in a strap, or wrap the handle, or attach a bottle opener to it, go nuts, tag me up in what youve made or something, i like seeing other peoples creations and work. Thanks for watching, crack on and make something
No Butters was harmed in the making of this video, hes currently sleeping in a box of eggs using them as pillows
THUMBS UP " -- I MISS YOU SWEARING AT THE CATS LOL -- YOU AND WRAGGLES USED TO MAKE MY DAY .
Good to see you again, friend 👍
finally a video, well done we waiting for many more
Ah dude talk about pile on the pressure 😄 ok, was thinking today but im probably doing a bike ride with one of my kids, my bike is the tits! thats going to be a good video worth watching
@@thepoultrypeople Imagine you hook a few extra chains and belts onto that bicycle, you could manage to do all your lathe work and routing as you peddle along those rural roadsides - wear the helmet, 'cause your eyes won't always be on the road and "look, ma, no hands" and mind that Mr. Butters is riding along up on your shoulders.
Nicely done 😁
I see Mr. Butters hasn't changed a bit.
Great to see you are still alive and kicking was starting to wonder/worry a few months back....keep them coming :)
Yeah i went a bit quiet, ah man, life you know, but thanks, will do!
Great to see you back look forward to more videos
Wow Bongo, you’ve really gone techno compared to the old days. It’s good to see the progress. I’ve regressed, devolved into old school processes and that feels good as well. Glad to see you making things again. We’ll head back to Wales for another hike when this Covid shite is a little safer and after and the airports are emptied of all the revenge travelers. Peace and love from Pennsylvania mate.
Glad to see you back. Great video .
big, BIG 🥰🥰🥰 Happy Dance from 🇨🇦. Best "Notification" I've gotten in YEARS!!! 👍👍🥰🥰🥰🥰✌️🤘🤘
Wow, thank you, that brings a smile to my face, savage, im gonna start crying into my cat in a minute 😂😂
YES! Welcome back you legend!
Thank you, appreciated, good to be sharing some work again
Mr butters is still as mad as ever I see.
Wouldnt have it any other way, he sleeps a lot now
Good to see you again!
All good, thanks, nice to be sharing some stuff again
Finally
Haven’t seen your channel in a while. Glad to see you are still kicking. Awesome project. 🎉
Hey, thanks! I'm sorry, hopefully have some more content this year!
awsome
you came back with a bang😊😊,
i hope your well,
and i will look forward to seeing more of your videos.
all my best simon uk
Ive got a few good videos on the way, well, i think they are good 😂 scrap plywood and scrap bicycles have been making an appearance
video overdose 😂😂😂😂😂😂😂😂😂💯💯💯💯💯👍👍
Love Em, that lathe is a serious work out
My lathe awaits you with open arms, come and have a play if youre ever passing 😂
@@thepoultrypeople Those legs and knees must now all be transformed to titanium.
Very cool
That's something I may have to try. Very cool!
Its a good traditional workshop tool that you can pass down, ive still got my fathers here somewhere, i
Awesome, great to see you back, I've watched all your videos, you inspired me years back to make a routered / blowtorched sign, it turned out great and the recipient loved it.
Woah all the videos, now that is dedication, its been a while since the blowtorch has been out, ive got a chap at mensheds making a skyrim shield atm so need to find it. Are you keeping busy?
@@thepoultrypeople Yep first found you through the gas bottle burner videos many years back. Mensheds is a great idea. It's been a quiet year hobbies wise, I've been in and out of hospital and had 2 surgeries, slowly getting back to work, hopefully get back to hobbies soon, certainly miss it! Getting some good ideas from your videos, laser looks great, especially when can't manage heavier stuff in the garage, look forward to the review.
Welcome back!😀
Thanks, appreciated 👊
Was only talking yesterday about haven't seen you in a while. Hope all is well and great video
I was wondering why my ears were burning... getting back on it and thanks 👍
Hope more is coming????! We do appreciate what is posted tho, fer sure..... 👍👍🤘👃✌️🥰🇨🇦
Yes, soon, I promise 👍👍👍
@@thepoultrypeople 👍👍🥰🇨🇦
Incredible work, as usual, dude!!!
You never fail to amaze.. 🤜🤛
It is, the level of detail is about 0.07mm, incredible what those lasers will do and what they bring to your work, thanks
So creative shut off for it to props departments. Maybe Ant & Dec next time you’re in Wales
Trabalho sempre incrível. Parabéns
Great to see you back, missed seeing what you were going to make out of pallets. Keep up the great work 👍
Thank you!! 😊 Ive found some plywood recently and made a good project out of that
Look who's back!! Hope youre well bro!!
Sorry mate, my brain took another crash to the stroke unit, I'm back home now and hoping to get back on it soon as possible!
@@thepoultrypeople Woah!! Just missed you is all. Pray you have long lasting good health
Daí amigo bem legal seu trabalho
Obrigado, espero que esteja bem!
I was thinking about you the other week. Wondering why I hadn't seen you for ages. Hope your in good health. 👍🏻 How's the cat?
I wont lie, physically ok, mentally, meh, the last year or two has been hard, as its been hard on many many people, lost some people. Cats great, hes looking at me like he wants to kill me, i opened a jam jar and the noise pissed him off or something
Do you have a video of you making the skull chairs that you made
👍🏻🙂💚🙏🔥
hi
so what suprises have you in the works?,
me i just cant handle the cold 😊😊
Hello can i buy it somewhere ?