Awesome video. You are all very much appreciated guys. Keep up the great work. I've joined the toid forum, really excited about the affordable spinorama. Wow.
One thing about setting the gain for me is that I set it up to where I want my head unit to be at max volume. Example my head unit has a maximum of 75 but I don’t like to push buttons that much so I turn mine up to 35 then set the gain.
Just to mention to Nick about life and circumstances. We all have our ups and downs and things dont always go as expected. Everyone can agree on that. Dont put your channel performance lately all on yourself. People check your channel and alot of other channels like Justin's channel and others and at some point become saturated. They have learned and moved on. Checking back once in awhile to see something new maybe. There will be another tidal change with new DIY audio guys in waves and then the ebb tide again. Look at the online and retail vendors lately and you might see the same circumstances.
Nick really nailed it when he talked about all the inefficient subs in car audio. I had a atomic 1299 back in the day 99dB 1 watt at 1 meter hit a 136 with 50 watts of blade technologies power on the headrest in a USAC show! Where's the efficient subs for car audio guys now? Not trying to buy a HO alt. Car audio has went stupid over the years. Sure power is cheap, but what it really takes to use that power isn't.
Yes sir I used your set gains video! Rookie knowledge. 2016 Accord EXL premium HU only has preamp 1.8v at 75% volume and 3.33v at 100%. My Kicker 200.4 would not reach clip indicator with a 1000hz -5db test tone. I then used 0db tone and I was able to illuminate clip indicator about half turn on gain. -5db would speaker output 8.76v at max volume never reaching 14.14. Always felt I was leaving watts on the table. 0db test tone speaker output to 17v or higher, I didn’t turn the knob past that. Settled it in at 14.ish . It way clearer, louder and soooo much brighter. Some songs are recorded hotter than others where volume know is a no go past 25, and older songs there weren’t recorded hot can go to 35. And I still don’t know much about all this. Learning is hard.
These gentleman theyre both two sound perfectionists're after the same thing sound perfection One is a 20hz to 100hz perfectionists the other 20hz to 20k hz It's the joy of music we all agree on yeahey yeah ey
Also Justin I wasn’t a big believer of lithium either till I got it. On stock alt and lead acid I used to drop to 11.2 to 10.9 on a bad day and now with my 96 ah headway bank I don’t see below 13.6.
The various divisions of the company have been sold off, and then resold a few times over the years. As of 2024 the parent company of one of the divisions acquired the other divisions so all of cerwin Vega is owned by the same company now. They were at CES 2024 and they're trying to make a comeback. Everybody's rooting for them.
I understand providing value to the people watching the live feed by responding to questions but I feel that this got off track with so many personal responses. Other than that, the content was quite good. Most of these rule of thumbs are from the bad ol' days when we were tuning boxes using formulas and nomograms. Learning and using a decent software program like WinISD dispels or confirms so many of them.
You know, why then everytime ive texted JL AUDIO the port area to cubic foot ratio theyve given me has always been 9 square inches per cubic foot.Why is is so much less? Or does that area just work best with their subs?
I have a 12 kicker solo x and a taramp 3 k .I was really surprised there was no subsonic filter on the taramp .is there anything I can do that woks like a subsonic filter?
Here's a beginner's question: Are dual voice coils for the purpose of sending both stereo channels to one driver? After doing some reading I see that customizing impedance levels would be the most common function of DVC's. Is it possible to use one coil for the left channel and the other coil for the right channel?
Yes you can absolutely send the left channel to one coil and the right channel to the other coil. You are also correct in that the most popular use of dual voice coil drivers is to allow more impedance options.
out off topic! i have a 10" driver that i found in the shop, i thinks it was my son speaker! but it have a coil "look like a inductor" around the magnet, i never seen that and i search around the web with out inf! no legible brand other than "furious FR610" but nothing come up, the front is identical to the pioneer TS-W254F, but thats were the similarity end, any idea? have any one else seen a driver with coil in the magnet?
A question, what do you think of using a limiter and or Exciter hardware for home audio? I use Qobush but have a lot of difference in volume and tone, for example, compare Tambu Toto and Legend Bonfire albums with Fly by Night and other Rush and Van Halen 1, so much difference in recording quality? A limiter and or Exciter could compensate? Please your ideas?
You don't need either for home audio. An exciter is a tool for musicians and mix engineers as an effect to get the sound of a particular track to sound like they want it to and used similar to reverb or delay as tools. A limiter is also not needed as prerecorded music has already been mastered to eliminate huge peaks that would fry your system. Limiters are tools used in live audio to prevent peaks from say an overly hard drum hit in the microphone or someone dropping their microphone on stage - totally not needed for prerecorded already mastered music. What may benefit you is what is called an "automatic gain control". This device will equalize the levels of different tracks to make them play at the same volume level.
As far as Android head units, I've been extremely happy with my Maxpeedingrods DSP head unit. No noise issues and sounds better than the Alpine head unit it replaced. Had it over a year with no issues.
I enjoy the chemistry you guys have. The differences in personality are complimentary.
Awesome video. You are all very much appreciated guys. Keep up the great work. I've joined the toid forum, really excited about the affordable spinorama. Wow.
One thing about setting the gain for me is that I set it up to where I want my head unit to be at max volume. Example my head unit has a maximum of 75 but I don’t like to push buttons that much so I turn mine up to 35 then set the gain.
The "rule of thumb" you talk about in the beginning is from a Boondock Saints movie.
Just to mention to Nick about life and circumstances. We all have our ups and downs and things dont always go as expected. Everyone can agree on that. Dont put your channel performance lately all on yourself. People check your channel and alot of other channels like Justin's channel and others and at some point become saturated. They have learned and moved on. Checking back once in awhile to see something new maybe. There will be another tidal change with new DIY audio guys in waves and then the ebb tide again. Look at the online and retail vendors lately and you might see the same circumstances.
Nick really nailed it when he talked about all the inefficient subs in car audio. I had a atomic 1299 back in the day 99dB 1 watt at 1 meter hit a 136 with 50 watts of blade technologies power on the headrest in a USAC show! Where's the efficient subs for car audio guys now? Not trying to buy a HO alt. Car audio has went stupid over the years. Sure power is cheap, but what it really takes to use that power isn't.
Handling Standing-Waves in the Room is more important than ANY particular Specification of the Speakers !!!!!!
Yes sir I used your set gains video! Rookie knowledge. 2016 Accord EXL premium HU only has preamp 1.8v at 75% volume and 3.33v at 100%. My Kicker 200.4 would not reach clip indicator with a 1000hz -5db test tone. I then used 0db tone and I was able to illuminate clip indicator about half turn on gain. -5db would speaker output 8.76v at max volume never reaching 14.14. Always felt I was leaving watts on the table. 0db test tone speaker output to 17v or higher, I didn’t turn the knob past that. Settled it in at 14.ish .
It way clearer, louder and soooo much brighter. Some songs are recorded hotter than others where volume know is a no go past 25, and older songs there weren’t recorded hot can go to 35. And I still don’t know much about all this. Learning is hard.
Nick is the man I’ve watched all your videos brother keep up the great work fellas
These gentleman theyre both two sound perfectionists're after the same thing sound perfection
One is a 20hz to 100hz perfectionists the other 20hz to 20k hz
It's the joy of music we all agree on yeahey yeah ey
I’m more of a subsonic off type of guy and just listening for mechanical noise. I like to live on the edge though 😂
Also Justin I wasn’t a big believer of lithium either till I got it. On stock alt and lead acid I used to drop to 11.2 to 10.9 on a bad day and now with my 96 ah headway bank I don’t see below 13.6.
Talking about subwoofer efficiency and clarity...what happened to cerwin vega?
The various divisions of the company have been sold off, and then resold a few times over the years. As of 2024 the parent company of one of the divisions acquired the other divisions so all of cerwin Vega is owned by the same company now. They were at CES 2024 and they're trying to make a comeback. Everybody's rooting for them.
Show is getting better every episode
I think a little past half on the about the max you want to push your gain or volume on your head unit before distortion happens
It's in a 94 single cab dakota first gen
Oh yes, this post I like and I can use these rules for the best sound...
I understand providing value to the people watching the live feed by responding to questions but I feel that this got off track with so many personal responses. Other than that, the content was quite good. Most of these rule of thumbs are from the bad ol' days when we were tuning boxes using formulas and nomograms. Learning and using a decent software program like WinISD dispels or confirms so many of them.
It is hard to find the perfect balance.
Love this theme!
Is it safe to run a 8 inch and 12 inch subwoofer together on 1 channel? Both 2 ohms equal to 1300 rms and the amp max 1280 rms @ 1 ohms RED1800.5
the size of the woofer doesnt matter
You know, why then everytime ive texted JL AUDIO the port area to cubic foot ratio theyve given me has always been 9 square inches per cubic foot.Why is is so much less? Or does that area just work best with their subs?
I have a 12 kicker solo x and a taramp 3 k .I was really surprised there was no subsonic filter on the taramp .is there anything I can do that woks like a subsonic filter?
Hi Justin, I'm curious on your opinion on 8 inch subwoofers under $100
I just uploaded a video with a pair of eights.
Here's a beginner's question: Are dual voice coils for the purpose of sending both stereo channels to one driver? After doing some reading I see that customizing impedance levels would be the most common function of DVC's. Is it possible to use one coil for the left channel and the other coil for the right channel?
Yes you can absolutely send the left channel to one coil and the right channel to the other coil. You are also correct in that the most popular use of dual voice coil drivers is to allow more impedance options.
out off topic! i have a 10" driver that i found in the shop, i thinks it was my son speaker! but it have a coil "look like a inductor" around the magnet, i never seen that and i search around the web with out inf! no legible brand other than "furious FR610" but nothing come up, the front is identical to the pioneer TS-W254F, but thats were the similarity end, any idea? have any one else seen a driver with coil in the magnet?
What is a good airspace and port area box for a x12v3 with the parameters included?
Manual should have cubic feet recommendation
A question, what do you think of using a limiter and or Exciter hardware for home audio? I use Qobush but have a lot of difference in volume and tone, for example, compare Tambu Toto and Legend Bonfire albums with Fly by Night and other Rush and Van Halen 1, so much difference in recording quality? A limiter and or Exciter could compensate? Please your ideas?
You don't need either for home audio. An exciter is a tool for musicians and mix engineers as an effect to get the sound of a particular track to sound like they want it to and used similar to reverb or delay as tools. A limiter is also not needed as prerecorded music has already been mastered to eliminate huge peaks that would fry your system. Limiters are tools used in live audio to prevent peaks from say an overly hard drum hit in the microphone or someone dropping their microphone on stage - totally not needed for prerecorded already mastered music.
What may benefit you is what is called an "automatic gain control". This device will equalize the levels of different tracks to make them play at the same volume level.
Can you use WINISD on an android phone?
As far as Android head units, I've been extremely happy with my Maxpeedingrods DSP head unit. No noise issues and sounds better than the Alpine head unit it replaced. Had it over a year with no issues.
rule of thumb false belief, comes from the movie Boondock Saints. When they are working in the meat packing facility.
👍
At my age anything above 12k is useless
Yep.