Thank you for posting This helped me out a lot. Could not find why my pedal assistant wasn't working and I followed your settings and it started working again. Thank you again.
if you set it for 20”, you have to adjust the % number in setting P18 to 125%, this compensates for the changes in the wheel diameter of 23” (0023) from the factory, to a 20” diameter (0020). Setting #P6 to 0020 will increase your torque and the speed, but if you have to change #P18 to about 120% for the right speed to be displayed on your speedometer.
I’m having trouble with my S8, hoping you can help. I haven’t rode the bike for about 2weeks and the throttle and pedal assist won’t accelerate. And there’s no errors in the display. Battery is fully charged.
@@Charlie-yt1yq when I get a chance I will do another video. I'm not sure how I would be able to GPS the speed and record at the same time. Maybe screen record. I'll let you know though
Leave the bike power off and toggle the A&B switch to B activate the front wheel drive leave the bike power off hold the left break lever in keep it held in power the bike on hold for additional 10 seconds with the power on see if this helps
you may have not pressed and held down the 2 up/down arrows again for about 3 seconds after you did your changes, so you didnt save the changes into memory …
I just bought my amyet s8 Dual motor, i already connect the wire for the front motor and click the "B" settings but still, it's not working. Can u pls help me? Thank you in advance
@@JamalJacob turn the bike off activate the front wheel power switch on now leave that switch on hold the left hand brake lever. Turn the bike on. Keep holding the lever on for 10 seconds after the bike is powered on. That should do it
I’ve mess with the size on the tire and have the settings opened up. I can make it say 50mph on the speedometer but irl on gps and cop speed trap max I can get out of it is 32mph on a full battery. I used your settings to get it from 28mph to 32mph. If I can get 40mph true out of it and I watched the wrong video of yours link the correct one please cause I need 40mph true.
@@bobbyobarr6820 turn the bike off activate the front wheel power switch on now leave that switch on hold the left hand brake lever. Turn the bike on. Keep holding the lever on for 10 seconds after the bike is powered on. That should do it
How good is the reliability? how many miles you have on it? and is it easy to find parts like a whole controller if it were to break down since it’s due motor?
@@Turkeyboy900 I put 800mile almost on mine and it runs hard still. The battery is losing its charge faster that’s about it. It not draining it by much. So I think after about 500 more miles I’m have to buy a new battery. Also I’ve wrecked it pretty hard twice and it super solid.
Thank you for posting This helped me out a lot. Could not find why my pedal assistant wasn't working and I followed your settings and it started working again. Thank you again.
ATTENTION IF YOU GUYS ARE WATCHING SET P18 TO 130
Is there any reason for this
@@theirishaviationspotter4510 It depends what you're trying to do with the bike settings
If I did these settings is it too late to do a factory reset and how do I get it back to normal speeds?@@SMOKEY-JAYS-DIESEL
@@gregsantiago3743 I have a long video on all the factory settings. Watch AMYET settings number 2
why not 150?
I have a question, my speedometer on my amyet isn’t working at all any fixes?
Hmm 🤔 maybe check all the connector plugs and wiring
Thanks sir 🤝🏾
@@muhammedd5926 your welcome 🔥🔥👊🏻
@@muhammedd5926 actually use my part 2 video of the settings. They are exactly the ones you're needing
Does anyone know which wires under the seat are for the speed limiter? Is it the white one? I heard disconnecting them turns off the speed limit
How do you set the wheel diameter to get the right mph
@@TonyRodriguez-k6d it's in the video P06 20"
My speedometer keeps saying 00.0 even when im riding @@SMOKEY-JAYS-DIESEL
if you set it for 20”, you have to adjust the % number in setting P18 to 125%, this compensates for the changes in the wheel diameter of 23” (0023) from the factory, to a 20” diameter (0020). Setting #P6 to 0020 will increase your torque and the speed, but if you have to change #P18 to about 120% for the right speed to be displayed on your speedometer.
Thank you so much for getting back to me very thankful Tony
@rightfromtheart so does making the diameter higher than it really is make the bike faster?
What are the top speeds on each mode?
I'm not sure of that
I’m having trouble with my S8, hoping you can help. I haven’t rode the bike for about 2weeks and the throttle and pedal assist won’t accelerate. And there’s no errors in the display. Battery is fully charged.
@@AhSonnyBoikf take the battery completely off and put it back on If that doesn't do it put all the stock settings back into the bike
@@SMOKEY-JAYS-DIESEL okay ima try it
@@AhSonnyBoikf Go to the long video settings number 2 ruclips.net/video/9y-6T9fOXYM/видео.htmlsi=kLV3lPEvwMcnzWen
@@SMOKEY-JAYS-DIESEL thanks bro I got now. I was trying to put a bigger battery on it, but it won’t work so I went back to the old 48 V battery.
Trying to put a 60 V battery
How’d you removed the amyet brand on the battery?
@@T_rmrz aftermarket battery 🔋
My speedometer doesn't match the one on my phone
There's ways to adjust it
@SMOKEY-JAYS-DIESEL how?
@@unkymf8323 Go to my other video settings number 2
where did you get the parameter settings is it in the manual or?
From the company but I'm going to make another video because they gave me the wrong settings
You kept the tire settings the same right cuz if you ddint it will say 45mph but ud be going 35 I still would like to see a GPS verified speed
@@Charlie-yt1yq when I get a chance I will do another video. I'm not sure how I would be able to GPS the speed and record at the same time. Maybe screen record. I'll let you know though
@SMOKEY-JAYS-DIESEL yeah screen record u can do it on a GPS app or use to phones
Are your shocks after market
@@bobbyobarr6820 after market
@@SMOKEY-JAYS-DIESEL where did you get them., thanks!
@rightfromtheart eBay Bucklos 2023 20" Suspension Air Fork 180mm Travel Snow Electric MTB Bike 4.0 Fat Tire
i copied these settings but its still at 15. What should I do?
Leave the bike power off and toggle the A&B switch to B activate the front wheel drive leave the bike power off hold the left break lever in keep it held in power the bike on hold for additional 10 seconds with the power on see if this helps
My speedometer keeps saying 00.0 mph when im riding i set my setting just like the video and on my first ride it worked but it doesnt now
Very very strange 🤔🤯 I'll see if I can help you
you may have not pressed and held down the 2 up/down arrows again for about 3 seconds after you did your changes, so you didnt save the changes into memory …
@@rightfromtheart the changes are still there
It's fine now fixed on it own but It still reads about 5 to 10 mph more than my phone
I just bought my amyet s8 Dual motor, i already connect the wire for the front motor and click the "B" settings but still, it's not working. Can u pls help me? Thank you in advance
Hello friend, I'm not sure what's going on there. It won't be in the settings are you sure the connectors are plugged in tight?
How do I get it to the max speed?
@@JamalJacob ruclips.net/user/shorts7EaoI1bQ6IY?si=0xyBFC9gqvIEj-81
@@JamalJacob turn the bike off activate the front wheel power switch on now leave that switch on hold the left hand brake lever. Turn the bike on. Keep holding the lever on for 10 seconds after the bike is powered on. That should do it
I’ve mess with the size on the tire and have the settings opened up. I can make it say 50mph on the speedometer but irl on gps and cop speed trap max I can get out of it is 32mph on a full battery. I used your settings to get it from 28mph to 32mph. If I can get 40mph true out of it and I watched the wrong video of yours link the correct one please cause I need 40mph true.
You need the 52 volt battery upgrade
@@bobbyobarr6820 turn the bike off activate the front wheel power switch on now leave that switch on hold the left hand brake lever. Turn the bike on. Keep holding the lever on for 10 seconds after the bike is powered on. That should do it
@@SMOKEY-JAYS-DIESEL what does it do if I do this??
And Can I do that with 48 volt or only 52??
On this video these are stock settings. Yes, for 48 volt battery 🔋
My speedometer stopped working after I turned it into miles
That He's very strange. I've never seen this before 🤔
How good is the reliability?
how many miles you have on it?
and is it easy to find parts like a whole controller if it were to break down since it’s due motor?
@@Turkeyboy900 there is lots of parts that interchange and It's been very reliable. I have about 300 mi on it
@@Turkeyboy900 I put 800mile almost on mine and it runs hard still. The battery is losing its charge faster that’s about it. It not draining it by much. So I think after about 500 more miles I’m have to buy a new battery. Also I’ve wrecked it pretty hard twice and it super solid.
Throttle no longer works with these settings
@@animemuse8613 Use my other video number 2