Some people are asking why my main is the MF3RS2 M instead of the SM. 1. I like stickerless cubes more right now since chipped stickers actually make me do worse. 2. I wanted to try a stickerless in competition. 3. I got a good average with it in competition so I'll continue to use it for now. 4. I haven't competed that much in general. For example, my main was the valk for like half a year, yet I've never used the valk in competition because there were no comps. So I like testing out different feelings and how they work out in comp. All my home PBs (besides single) have been set with the SM, but in comp I'm better with the MF3RS2 M.
J Perm putting N35 magnets in yourself is also a good idea! Id did that and you wont really feel the magnets when turning but it will be a lot more stable and still very fast! its my main for a long time already!
e*ic h*cks I have N35 in my MF3RS2 and it's perfect because of the lack of speed. But like he said in the video N35 is most likely too weak to be useful (at least for people like him and me). But in the end everyone has different preferences in cube feel.
I haven't used a magnetic Little Magic, but I'd like to since the regular one is actually halfway decent. I also really want to try an MF3RS2 M though; the regular is ridiculously good!
ich kann eurocubes.com/ empfehlen, schneller Versand, nur 5 euro Versandkosten, hab mir den yuxin da bei ner anderen Bestellung einfach dazu gepackt ;)
After being a scrambler at a competition I would say my opinion of the 3x3 market would look something like this: 1. MF3RS2M - Actually not good out of the box, but after setting up and magnetizing it became the cube where all my PBs are set. I use a weakly magnetic version as my main. I generally like the softer feel but it's still very stable and controllable. 2. WeiLong GTS2M - I find that it's quite similar to the MF3RS2, but it feels a bit faster and harder, probably because the competitors that I scrambled for had stronger magnets than what I normally use. 3. Valk 3 - My brother has a non magnetic Valk that I might actually prefer over magnetic ones. Generally a more stable but lacks the softer feel. The magnetic ones are more blocky. 4. Little magic M - only 1 competitor that I scrambled for used this cube and it's quite nice. Feels like YueXiao and Yan mixed. 5. Gan Air SM - there were some good ones and some super tight-feeling ones that I find it harder to turn. Even with the better ones, it's really not my kind of cube at all. It generally feels the snappiest, probably due to strong magnets.
I use the cubicle little magic M. I gotta say, it is SO SO SO much better than the original magic. Bought it at northeasterns yesterday for 19 bucks. It was so good that I used it in 3x3 that day. I got a new comp PB average of 15.24. It is amazing and super cheap. 10/10 would reccomend
I used the Supernova Little Magic M as my main for a looooong time. I tried to replace it a bunch of times but always went back to it no matter what. It's just recently been replaced finally but only by the Gan 356 X, so that should tell you something.
i got the yuxin little magic m a couple weeks ago and it is FANTASTIC. My cube before that was the qiyi warrior and this is a great improvement from it. The corner cutting is great and it is very easy to turn. If you have small hands, this is great for you
You know you can edit your comment right?Don't post a separate comment,they both get lost.If you can't figure out how to edit it,you can just reply to it.
@@MrinkDilk I just magnetized my YLM over the weekend with 4x2mm N35 magnets, and well.. I'm super happy about it, I'll have to set it up in a couple of days, but my first impression was just: WOW! I wouldn't go any stronger than N35, I feel like that's the perfect magnet strength for this cube :)
Self-magnetized a YLM here. Just a heads up: I agree that YLM needs stronger *feeling* magnets than the RS2M, but keep in mind that the little magic has very thin plastic making even 4x2 N35s feel really strong.
i only ever have had 1 3x3 which is the v cube 3x3 so i don't know witch i would prefer so i would u guys pls recommend me one that would be good for a beginner like me. also i would perrefer the one with the better corner cutting cus i hate that the v cube has horrible corner cutting.
I RECENTLY got into cubing so not a LARGE experience with different brands. Main- GANS UM Backup- GANS Air My Little Magic M came in yesterday & I’m impressed right out the box. Considering the $$$. I got mine for $13.99 (Stickered Version) Strong magnetics, giving the cube a GREAT shape/structure. Crunchy Sound, but Algs Flows nicely. I’m waiting for more DNM-37 to come in but the Angstrom’s Gravitas made the lose tensioning controllable. Definitely Awesome recommended for any level Cuber. I’m going to give it more time but THINKING my new main after a resticker.
So I purchased two cubes. Little magic supernova and stock little magic. I magnatized the stock one and lubed it up and tensioned it... The two were near identical... It must took me a evening of fixing the cube up,few bucks of magnets, and little lube... Not hard. So I DID end up putting weight 1 in the cube with little lunar lube. The weight 1slowed it down little to much while lunar speeds back up. But the slow down actually helps allot with slowing down (which is needed) the little magic is my main right now. It's a comfortable cube, cheap, and is great. I'm a beginner with 50sec solving times. But I own lot of cubes and like little magic for price and usability. I day little magic gets 8out if 10 maybe 9/10 after fixed up.
For someone who wants speed AND control, but is on a budget, I’d recommend the QiYi warrior w. It’s extremely controllable, yet fast, and is stickerless. Overall amazing cube for beginners, and professionals who have a hard time controlling their force. If speed is what you want, there’s no competition with the little magic. Pick what you think suits your style. This is from a person who has a shit ton of cubes, and has alternated between the warrior and the little magic as their main. Good luck, I hop this helped you.
Ordered it this one. It hasn't come yet, but I searched it to see how it is, and 1. J Perm has a video, that's nice and 2. it's really good for such a low price (8 euros)
i magnetised it and let everyone at my comp try it and they really like it edit: this cube is amazing and could outperform any flagship that you throw at it if you like how it feels
The thing that I like about j perm is that he uses cubes that are not too expensive (Gan 356 Air Sm) but gets good times. This helped my times improve because I was very discouraged because all top speedcubers were sponsored and had 49-100 dollar speedcubes at the time. All I am saying is thanks for using less expensive cubes that the average person can buy.
I use a yuxin little magic,even when I had the chance to buy a valk 3,I chose the little magic,its the best cube,it feels like a 20$ cube but its 4 times cheaper
I picked up a yuxin little magic because of your review, i felt like it was a little uncontrollable so i decided to put 4x2 mm neodium magnets into it. its been main main ever since
I have a magnetic little magic which has been setup by a renowned company of India - Cubelelo... It's pretty good - fast enough to get good times and not that fast to feel uncontrollable.. .. I think the magnets are really helpful here...(I used n35 magnets). I also have Mf3rs under similar setup( magnetic of course) and I prefer little magic over it( bcoz Mf3rs is too uncontrollable and fast and I can't feel the magnets)... I average around 23 seconds(avg of 100)
Diptoneel De But I must say u got a valid point... I was furious as I thought it was insulting but later I thought it over and.... U'r right👍 We should buy the stock little magic untill sub 15 then magnetic cubes like weilong2/valk3/air series. Happy cubing....
i have magnetized a yuxin little magic.. and an mf3rs2...the yuxin is much more better than mf3rs2 ... it just takes time to get used to....it has became my main over the valk 3 power m.
With my previous main being the little magic m I can say the magnets are extremely strong and effective which I like and is very fast but currently my main is the tent yun
My friend owns a Speedcube Customline Yuxin Little Magic M (a now discontinued line previously owned by Speedcube Australia), and it’s really nice; the corner cutting is great and the magnets click into place really nicely. Of course, I haven’t tried an MF3RS2M (only the non-magnetic MF3RS2), but I would assume that they’d be pretty similar in terms of performance and the difference would probably depend on the individual.
I tried a Yuxin Little Magic M, and it was pretty good. Definitely one of the best cubes on the market. The Cosmic one looks super good. I might pick one up in the near future.
My GTS v2 M is much quieter than the one presented here. Maybe because I don't turn it that fast. But the Little Magic M is so quiet! Like my GTS M when turning it slowly. Wow!
I don't have a cosmic one, but I have one that I bought at a competition that was set up by someone else and it is my OH main. It could be my 2H main but I like the SM way too much. I want mine to be fast for OH so it's easier to turn but it's very smooth and I like it.
From its name, the little magic with magnets works just like magic. And I just use effortless flicks with this rubiks because I solve calmly every time me and my friends have a race.
Hello cubers, I need some help, I've been using GAN 356 R for about 1.5 years now and it is pretty fast and non magnetic, it is really flexible and I don't wanna magnetize this one, if I go for Yuxin little magic M will it be considered as an upgrade like did my cube get any better?
I know this might sound like I am just trying to get more views, but I have a video on my channel where I compare Both the MF3RS2 and the Little Magic before and after magnetization and setup and give my personal opinion on both. (J-Perm, if you feel like this is more of a self advertisement please feel free to remove this comment. p.s well done with the video. I might want to get a cosmic little magic m too after seeing this review)
Hey j how are you!! I didn't commented on your videos for a while but I watch every video that you upload. The tutorial that you made were soo good that using those tricks and tips I'm sub-20 now.. thanks for the efforts that you do while making these kind of amazing videos....just keep up this work and we all fans will love you...
i have a yuxin little magic m and it is my main but i think you will like it if you like looser cubes that have a lot of stablility and also if you like stable cubes
I just set up a little magic with n45 magnets and lubed it with speedy and dnm37 and it is probably going to be my main because it’s really effortless to turn and feels really smooth. If you have any questions I’d be happy bro answer them
What magnets should i pick? 4x2 N50, 4x2 N45, or 4x2 N35 I'm having a hard time picking which magnet is the perfect strength for the little magic, so if you could enlighten me, i'd appreciate it
i sold 3 little magic ms just yesterday to some classmates xd If you want to magnetise yourself i'd definitely recommend N38 4x2 magnets. It's controllable, but really fast. Be careful when glueing, you might get glue stuck in between the tabs and you have to saw off another tab to get it to fit together
I bought the proshop little magic from cubicle and it came with too much too lube in it, it made the cube slow, I had to clean the whole cube and apply the right amount of lube for me now its a lot faster and very in control.
My friend is also a speedcuber but with a forceful turning style and he ended up popped all of the pieces out, at the time i was still a newbie to the cubing scene; I just threw away the pieces ;( i have a smoother but quick turning style, going for efficiency and accuracy
The Yuxin little magic is good and I magnetized mine. The magnets I feel are a bit to weak and I didnt lube it that much and it feels over lubed and it hasn't broken in after about 200 solves. So... I would reccomend if you make your own to try it at first with just a little lube and keep adding a little more to your preference. Also use stronger magnets than 4x2 N35 like jperm said
The little magic M is easily my main over the YJ MGC. I bought it at a competition recently where I also tried Gan's SM and UM and the little magic M fits my turning style and preferences a lot better.
today i boughy valk 3...it is super...but a problem is it is sticking in movements..like my last cube was aolong it was very good. But valk 3 is feeling like very "strict man". How can i make this valk 3 free cube.....
I don't own a valk, but I do know that stiff cubes often are very tight. Try loosening it. But if the tensions aren't the case, try cleaning the pieces and checking the core and springs for any damage. Also, sometimes on puzzles that are gummy or sticky, setting up the cube after cleaning it with lighter lubes of the pieces (lubicle speedy, dmn37, Galaxy) and medium to heavy on the core can help stop stickyness.
The little magic elite m is my main, and it feels really smooth and buttery, which is what i look for in cubes. i average 15 on it. I have never tried the mf3rs2,so can someone plz tell me if it fits the desription of the magic?
With M slices, all the algs have M and U, but i switch hands and do M and U' like you, J perm. Just wondering if there is a penalty or if it is just preference. Thanks!
My dad has a GAN air UM and I really like that cube, I have never tried an mf3rs2 m, but everyone seems to like it. I want to buy a new cube for myself so my questions are: does the SM feel like the UM? And should I get a SM or a mf3rs2 m?
SM is better than UM, and it depends on preference for ur last question. mf3rs2m is slower and more controllable, SM is faster and also has that unique gan feel that you may or may not like. the mf3rs2m feels similar to a gts2m in every way besides speed being slower.
What? My GTS 2 has like legit a cc of weight 5 in it and it’s uncontrollably fast. It gets slow after lubing but then speeds up again to like the point where it does U4’s. I do have looser tensions but when tighter the corner cutting is sacrificed and it’s still the same speed.
J perm I have a really good budget cube that i bought in a local store Its stickerless and im pretty shure it is one of the best i tried My average with it is around 15 and 17 seconds
Stickerless little magic or black? I have a stickerless but i lost it so i am looking to replace it with a cosmic one. Just need to know which is better, black or stickerless.
i got the yuxin little magic stickered and stickerless and i didn't like it AT ALL. it was too light and loose, it caught but it was fast. got me some 4x2's at 35 neodimium magnets and made the mod cause it was either that option or not even use the cube (yes, it was THAT bad). to my surprise not only made it better, it made it better than the valk 3 i own!. i wouldn't call it my main but thinking about it i don't even have A main, i just use all my cubes and i like all my cubes being awesome.
I have the yuxin little magic m with n35 4x1.5 it is so fast yet controllable its not my main though but i just keep coming back to it and yes its my oh main
Some people are asking why my main is the MF3RS2 M instead of the SM.
1. I like stickerless cubes more right now since chipped stickers actually make me do worse.
2. I wanted to try a stickerless in competition.
3. I got a good average with it in competition so I'll continue to use it for now.
4. I haven't competed that much in general. For example, my main was the valk for like half a year, yet I've never used the valk in competition because there were no comps. So I like testing out different feelings and how they work out in comp. All my home PBs (besides single) have been set with the SM, but in comp I'm better with the MF3RS2 M.
J Perm putting N35 magnets in yourself is also a good idea! Id did that and you wont really feel the magnets when turning but it will be a lot more stable and still very fast! its my main for a long time already!
J Perm so true
e*ic h*cks I have N35 in my MF3RS2 and it's perfect because of the lack of speed. But like he said in the video N35 is most likely too weak to be useful (at least for people like him and me). But in the end everyone has different preferences in cube feel.
I am thinking of getting a normal little magic and adding the magnets myself.
Sir plzz upload a vid of your solves in comp....in future
3:32 that F2L was so smooth omg
I just peel off the stickers on a stickerless cube
Oh my god smooooth
the power of look ahead
I wish that was my F2L
yeah ikr
oh 2:17 missed the timer RIP
Happened to me a lot too
i thought i commented on this video a year ago, although i've never watched this review xD
Oops :p
A cuber’s greatest pet peive
Usually i miss the timer 5 continuos times
Wow, you solve IT faster than I can Get my cross
Me too
Noob
@@taheralipatrawala7300 what’s your PB? I was a noob 3 years ago, yes
Fr
@@misterchess3254 24 with 5 years old Moyu Guanlong with scratched stickers.! 🙂 Could be twice as better from now with better cube
I haven't used a magnetic Little Magic, but I'd like to since the regular one is actually halfway decent. I also really want to try an MF3RS2 M though; the regular is ridiculously good!
you should totally magnetise a ylm. imo its performance is on par with top puzzles
When you just ordered a normal yuxin and have to pay tons of money for shipping because you live in Germany and then you see this
Maxi Voll Kommt mir bekannt vor ^^"
try to find a way to magnetize it!
well not the like the normal one is bad, just that the magnets make a bigger difference than I expected
ich kann eurocubes.com/ empfehlen, schneller Versand, nur 5 euro Versandkosten, hab mir den yuxin da bei ner anderen Bestellung einfach dazu gepackt ;)
Maxi Voll Das gleiche hatte ich mit meinem Gan Um bevor eine Woche später der sm rauskam
After being a scrambler at a competition I would say my opinion of the 3x3 market would look something like this:
1. MF3RS2M - Actually not good out of the box, but after setting up and magnetizing it became the cube where all my PBs are set. I use a weakly magnetic version as my main. I generally like the softer feel but it's still very stable and controllable.
2. WeiLong GTS2M - I find that it's quite similar to the MF3RS2, but it feels a bit faster and harder, probably because the competitors that I scrambled for had stronger magnets than what I normally use.
3. Valk 3 - My brother has a non magnetic Valk that I might actually prefer over magnetic ones. Generally a more stable but lacks the softer feel. The magnetic ones are more blocky.
4. Little magic M - only 1 competitor that I scrambled for used this cube and it's quite nice. Feels like YueXiao and Yan mixed.
5. Gan Air SM - there were some good ones and some super tight-feeling ones that I find it harder to turn. Even with the better ones, it's really not my kind of cube at all. It generally feels the snappiest, probably due to strong magnets.
I magnetized a little magic a couple months ago using 4x2 n45's and I absolutely love it, I reccommend it to anyone, especially for how cheap it is.
I use the cubicle little magic M. I gotta say, it is SO SO SO much better than the original magic. Bought it at northeasterns yesterday for 19 bucks. It was so good that I used it in 3x3 that day. I got a new comp PB average of 15.24. It is amazing and super cheap. 10/10 would reccomend
The cosmic little magic is my main ;D
HELLL YEAHH
I've got a moyu gts3m
Tyler Li i got a Gan X. XD
Did u get with stickers, if u did are they still bad as the original or are they better with cosmic
is the supernova good as well?
The yuxin little magic is the best cube I've ever tried, better than the Gan (my opinion). I think the magnets strength is just perfect
What planet are you from bud, 😂 that’s stretching it
@@kienfudge3638 totally. If he said RS3M that might be reasonable
@@chadguy45 are you have the dumb?
@@abdelrahmantarek7929 what??
@@chadguy45 that comment was before the rs3m 2020
I used the Supernova Little Magic M as my main for a looooong time. I tried to replace it a bunch of times but always went back to it no matter what. It's just recently been replaced finally but only by the Gan 356 X, so that should tell you something.
i got the yuxin little magic m a couple weeks ago and it is FANTASTIC. My cube before that was the qiyi warrior and this is a great improvement from it. The corner cutting is great and it is very easy to turn. If you have small hands, this is great for you
also, I magnetized it myself, my new main, pretty impressive, just break it in as more as possible, then just enjoy 😊
You know you can edit your comment right?Don't post a separate comment,they both get lost.If you can't figure out how to edit it,you can just reply to it.
@@MrinkDilk I just magnetized my YLM over the weekend with 4x2mm N35 magnets, and well.. I'm super happy about it, I'll have to set it up in a couple of days, but my first impression was just: WOW! I wouldn't go any stronger than N35, I feel like that's the perfect magnet strength for this cube :)
@@leokainzi8041, thanks I just ordere my N35 4mm x 2mm Magnets. Im looking forward to magnetizing it :)
I just bought the YuXin Little Magic. I do not regret it.
00:06 Dylan doing J perms are so satisfying to watch.
Self-magnetized a YLM here. Just a heads up:
I agree that YLM needs stronger *feeling* magnets than the RS2M, but keep in mind that the little magic has very thin plastic making even 4x2 N35s feel really strong.
I was waiting for this, finally here it is, thanks mate 😀
i only ever have had 1 3x3 which is the v cube 3x3 so i don't know witch i would prefer so i would u guys pls recommend me one that would be good for a beginner like me. also i would perrefer the one with the better corner cutting cus i hate that the v cube has horrible corner cutting.
I have a Yuxin Little Magic M with N35 Magnets, it’s really good, but i would recommend using stronger magnets though.
I found you
Yea n45 will be perfect
I RECENTLY got into cubing so not a LARGE experience with different brands.
Main- GANS UM
Backup- GANS Air
My Little Magic M came in yesterday & I’m impressed right out the box. Considering the $$$. I got mine for $13.99 (Stickered Version)
Strong magnetics, giving the cube a GREAT shape/structure. Crunchy Sound, but Algs Flows nicely. I’m waiting for more DNM-37 to come in but the Angstrom’s Gravitas made the lose tensioning controllable.
Definitely Awesome recommended for any level Cuber. I’m going to give it more time but THINKING my new main after a resticker.
So I purchased two cubes. Little magic supernova and stock little magic. I magnatized the stock one and lubed it up and tensioned it... The two were near identical... It must took me a evening of fixing the cube up,few bucks of magnets, and little lube... Not hard. So I DID end up putting weight 1 in the cube with little lunar lube. The weight 1slowed it down little to much while lunar speeds back up. But the slow down actually helps allot with slowing down (which is needed) the little magic is my main right now. It's a comfortable cube, cheap, and is great. I'm a beginner with 50sec solving times. But I own lot of cubes and like little magic for price and usability. I day little magic gets 8out if 10 maybe 9/10 after fixed up.
ive been using this for over 2 years and it's the best
I love the feel and speed of little magic just as the feel of the gan 356m! By the way, little magic was non magnetic with quite fast lube inside it
For someone who wants speed AND control, but is on a budget, I’d recommend the QiYi warrior w. It’s extremely controllable, yet fast, and is stickerless. Overall amazing cube for beginners, and professionals who have a hard time controlling their force. If speed is what you want, there’s no competition with the little magic. Pick what you think suits your style. This is from a person who has a shit ton of cubes, and has alternated between the warrior and the little magic as their main. Good luck, I hop this helped you.
Red Eye which would you prefer the Yuxin or the warrior
AutisticYellowKid7000 at this point, the yuxin. It’s faster, and now that I’m a bit better at control, it’s easy to use
Have you tried magnetising it? If you have, what magnets suits best for ylm?
Ordered it this one. It hasn't come yet, but I searched it to see how it is, and 1. J Perm has a video, that's nice and 2. it's really good for such a low price (8 euros)
i magnetised it and let everyone at my comp try it and they really like it
edit: this cube is amazing and could outperform any flagship that you throw at it if you like how it feels
Ew, magnets, why not get a v-cube 3? :D
No, rubik's brand is the best
ikr
ruclips.net/video/vEVq295zKps/видео.html
It’s obviously the the dollar store cube🙄😂
hes obviously joking
THANK YOU! I've been looking for a review on this forever
The thing that I like about j perm is that he uses cubes that are not too expensive (Gan 356 Air Sm) but gets good times. This helped my times improve because I was very discouraged because all top speedcubers were sponsored and had 49-100 dollar speedcubes at the time. All I am saying is thanks for using less expensive cubes that the average person can buy.
I use a yuxin little magic,even when I had the chance to buy a valk 3,I chose the little magic,its the best cube,it feels like a 20$ cube but its 4 times cheaper
@@isaacgeorge8253 Thanks for the support.
The Yuxin Little Magic M is amazing!! I would totally recommend it!!
I picked up a yuxin little magic because of your review, i felt like it was a little uncontrollable so i decided to put 4x2 mm neodium magnets into it. its been main main ever since
I have a magnetic little magic which has been setup by a renowned company of India - Cubelelo... It's pretty good - fast enough to get good times and not that fast to feel uncontrollable.. .. I think the magnets are really helpful here...(I used n35 magnets). I also have Mf3rs under similar setup( magnetic of course) and I prefer little magic over it( bcoz Mf3rs is too uncontrollable and fast and I can't feel the magnets)... I average around 23 seconds(avg of 100)
Aryan SATPATHY so costly cubes before sub-20 is a bad practice in the long run
Diptoneel De it's only 600INR or so I don't actually remember but it's near that (600-700INR)
Aryan SATPATHY Me too ! I also have a cubelelo Little magic M, it's awesome
Diptoneel De It's just 700 INR which roughly translates to just above 10$
Diptoneel De But I must say u got a valid point... I was furious as I thought it was insulting but later I thought it over and.... U'r right👍 We should buy the stock little magic untill sub 15 then magnetic cubes like weilong2/valk3/air series. Happy cubing....
i have magnetized a yuxin little magic.. and an mf3rs2...the yuxin is much more better than mf3rs2 ... it just takes time to get used to....it has became my main over the valk 3 power m.
what magnets did you use?
The rs2 is good with magnets. Rip my rs2 2019 to 2019
For me still Yu Xin little magic(not magnetic) is main bcoz I have only one speed cube 😂
Me too I am sub 20
I have a cube whose colour fades each day you use, and it makes lots of noise when rotated.
Edit: And that's my only 3*3
This is my first cube
Mee too 😂
Me too and my average is 16
i am planning to purchase a cube, confused beween the gan 356 xs and yuxin little magic m? which one is good? can anyone suggest?
Its too far to compare. Its weird for me to compare budget with the most expensive cube. 😅
I magnetized a little magic myself and it is one of the best cubes, in my opinion, out there.
I used N38 4x1 in a YLM and it was great! Vert controllable, and can still be really fast that's what you like.
I also have a stickerless yuxin little magic m
It's amazing and my main
What is your average?
I got to say I agree with this guy my main is too the yuxin little magic m
@@VKCUBED I have and just learnt cfop from beginner and AVG is 35-40...pb is 23 from beginner method. (By little magic eM)
@@ayurvedaandmuchmore4823 OK I avg 12 second with cfop but know I am learning rouxx
Should I magnetize it myself or have it setup
if you are going to magnetize it, get smaller magnets than they stay to us becuz the edges are really hallow so the plastic is thinner.
The magnetic auxin little magic is a great cube, the magnets are perfect and it is just perfect
With my previous main being the little magic m I can say the magnets are extremely strong and effective which I like and is very fast but currently my main is the tent yun
My friend owns a Speedcube Customline Yuxin Little Magic M (a now discontinued line previously owned by Speedcube Australia), and it’s really nice; the corner cutting is great and the magnets click into place really nicely. Of course, I haven’t tried an MF3RS2M (only the non-magnetic MF3RS2), but I would assume that they’d be pretty similar in terms of performance and the difference would probably depend on the individual.
I tried a Yuxin Little Magic M, and it was pretty good. Definitely one of the best cubes on the market. The Cosmic one looks super good. I might pick one up in the near future.
My GTS v2 M is much quieter than the one presented here. Maybe because I don't turn it that fast. But the Little Magic M is so quiet! Like my GTS M when turning it slowly. Wow!
I don't have a cosmic one, but I have one that I bought at a competition that was set up by someone else and it is my OH main. It could be my 2H main but I like the SM way too much. I want mine to be fast for OH so it's easier to turn but it's very smooth and I like it.
Just magnetized mine with 4.2 n35 magnets,and it's my new main. I don't know why but I like the ylm magnetized over the gts3m
From its name, the little magic with magnets works just like magic. And I just use effortless flicks with this rubiks because I solve calmly every time me and my friends have a race.
if anyone can answer this question pls
i f I get the non-magnetic one and magnetized by myself can it compete with it.
@Qboid yes you are correct .cosmic one is lubed and tensioned.thanks for replying
@Qboid yes.,probbaly not gad as the cosmic one .because I don't have that lubes
So what's the difference between cosmic little magic m and yuxin little magic m(8 $ one)?? Isn't it good.... I would like to buy that cheaper one....
That’s my main, the Cosmic Yuxin Little Magic M!
Which one is the best
1. QiYi Warrior W
2. YJ YuLong V2
3.Yuxin Little magic
4. MF3RS
5. Yuxin black Kylin
Plz reply fast
The supernova little magic m is really good too
does anyone have any idea on what are the lubes used in the cosmic Little magic
Hello cubers, I need some help, I've been using GAN 356 R for about 1.5 years now and it is pretty fast and non magnetic, it is really flexible and I don't wanna magnetize this one, if I go for Yuxin little magic M will it be considered as an upgrade like did my cube get any better?
The cheetah call j prem doing j prem "the uncle of the master"
I know this might sound like I am just trying to get more views, but I have a video on my channel where I compare Both the MF3RS2 and the Little Magic before and after magnetization and setup and give my personal opinion on both.
(J-Perm, if you feel like this is more of a self advertisement please feel free to remove this comment. p.s well done with the video. I might want to get a cosmic little magic m too after seeing this review)
MA Cuber hey i mean it was a respectful advertisement at least
hamilt2n yeah.
hamilt2n
hamilt2n it wasn't self advertisement. Are you stupid?
MA Cuber lmao i wouldn't mind seeing self advertising like this for day lol
I have used the magnetic version and I really like it
i tried little magic m with n42 magnets and its amazing
I’m disappointed my first speed cube was gonna be the yuxin little magic and I get it tomorrow but hopefully I Like it
GoldenNUKE 4700 what do you think? Haha
i prefear the Liitle magic 3x3 M V1 beacouse is so controleble, it lock-up 3 or 4 times on a solve and the magnets are pretty strong,i recomand
I just set my PB on a little magic M. Totally worth the investment
The cosmic little magic is an amazing cube.
I have a lil magic M from cubicle labs. One of the best cubes ive ever used!
I currently use a Rubik's brand cube. Is a speed cube worth it? If so which ones?
Hey j how are you!! I didn't commented on your videos for a while but I watch every video that you upload. The tutorial that you made were soo good that using those tricks and tips I'm sub-20 now.. thanks for the efforts that you do while making these kind of amazing videos....just keep up this work and we all fans will love you...
thanks for watching! glad you like them :)
i have a yuxin little magic m and it is my main but i think you will like it if you like looser cubes that have a lot of stablility and also if you like stable cubes
Plz make a video on how to magnetize your own 3x3
I just set up a little magic with n45 magnets and lubed it with speedy and dnm37 and it is probably going to be my main because it’s really effortless to turn and feels really smooth. If you have any questions I’d be happy bro answer them
What magnets should i pick?
4x2 N50, 4x2 N45, or 4x2 N35
I'm having a hard time picking which magnet is the perfect strength for the little magic, so if you could enlighten me, i'd appreciate it
@Qboid are they really that strong?
i sold 3 little magic ms just yesterday to some classmates xd
If you want to magnetise yourself i'd definitely recommend N38 4x2 magnets. It's controllable, but really fast. Be careful when glueing, you might get glue stuck in between the tabs and you have to saw off another tab to get it to fit together
I bought the proshop little magic from cubicle and it came with too much too lube in it, it made the cube slow, I had to clean the whole cube and apply the right amount of lube for me now its a lot faster and very in control.
My little magic YuXin is coming in 2 days
Forgot to ask, why do you like the mf3rs2 m more than the cosmic yuxin little magic?
My friend is also a speedcuber but with a forceful turning style and he ended up popped all of the pieces out, at the time i was still a newbie to the cubing scene; I just threw away the pieces ;(
i have a smoother but quick turning style, going for efficiency and accuracy
The Yuxin little magic is good and I magnetized mine. The magnets I feel are a bit to weak and I didnt lube it that much and it feels over lubed and it hasn't broken in after about 200 solves. So... I would reccomend if you make your own to try it at first with just a little lube and keep adding a little more to your preference. Also use stronger magnets than 4x2 N35 like jperm said
The little magic M is easily my main over the YJ MGC. I bought it at a competition recently where I also tried Gan's SM and UM and the little magic M fits my turning style and preferences a lot better.
today i boughy valk 3...it is super...but a problem is it is sticking in movements..like my last cube was aolong it was very good. But valk 3 is feeling like very "strict man". How can i make this valk 3 free cube.....
I don't own a valk, but I do know that stiff cubes often are very tight. Try loosening it. But if the tensions aren't the case, try cleaning the pieces and checking the core and springs for any damage. Also, sometimes on puzzles that are gummy or sticky, setting up the cube after cleaning it with lighter lubes of the pieces (lubicle speedy, dmn37, Galaxy) and medium to heavy on the core can help stop stickyness.
The little magic elite m is my main, and it feels really smooth and buttery, which is what i look for in cubes. i average 15 on it. I have never tried the mf3rs2,so can someone plz tell me if it fits the desription of the magic?
i have one and i love how smooth it is
With M slices, all the algs have M and U, but i switch hands and do M and U' like you, J perm. Just wondering if there is a penalty or if it is just preference. Thanks!
My dad has a GAN air UM and I really like that cube, I have never tried an mf3rs2 m, but everyone seems to like it. I want to buy a new cube for myself so my questions are: does the SM feel like the UM? And should I get a SM or a mf3rs2 m?
SM is better than UM, and it depends on preference for ur last question. mf3rs2m is slower and more controllable, SM is faster and also has that unique gan feel that you may or may not like. the mf3rs2m feels similar to a gts2m in every way besides speed being slower.
What's the best for magnetizing Yuxin Little Magic? Magnets n35 4x2 or 3x2?
What? My GTS 2 has like legit a cc of weight 5 in it and it’s uncontrollably fast. It gets slow after lubing but then speeds up again to like the point where it does U4’s. I do have looser tensions but when tighter the corner cutting is sacrificed and it’s still the same speed.
I use valk3 with n35 4×1.5 magnets
J perm
I have a really good budget cube that i bought in a local store
Its stickerless and im pretty shure it is one of the best i tried
My average with it is around 15 and 17 seconds
Other people's ylm is frosted.. How's your cube glossy?
Stickerless little magic or black? I have a stickerless but i lost it so i am looking to replace it with a cosmic one. Just need to know which is better, black or stickerless.
Darren Nguyen go for stickerless. The black one has very bad stickers that cheap easily
i got the yuxin little magic stickered and stickerless and i didn't like it AT ALL. it was too light and loose, it caught but it was fast. got me some 4x2's at 35 neodimium magnets and made the mod cause it was either that option or not even use the cube (yes, it was THAT bad). to my surprise not only made it better, it made it better than the valk 3 i own!. i wouldn't call it my main but thinking about it i don't even have A main, i just use all my cubes and i like all my cubes being awesome.
What magnets are they using in cosmic ylm m? Please tell me guys I'm confused 😭
I prefer yuxin little magic
It's awesome
The yuxin little magic is great but the grip is not the best if you have sweaty hands while cubing.
I magnetize both YLM and MF3RS2. And I like YLM. I like fast cube.
Put mf3rs springs in your GTS2M please, it makes a noticeable change in the stability.
I'll try it!
I have the yuxin little magic m with n35 4x1.5 it is so fast yet controllable its not my main though but i just keep coming back to it and yes its my oh main
does the cosmic have the stickers? or is it just sticker less like it looks on the website
I purposely overlubed mine with heavier lube and it's amazing :D
In M2 moves which finger goes first? I mean (last) finger or (last to second one)
ring then middle
J Perm okkkk thx. you always helped me
J perm which is better cube yuxin Little magic magnetic or mf3rs3 magnetic
J perm MoYu RS3 M 2020 and YuXin little magic M which one is good
"I was thinking about this the whole time"
Sounds like you're going out with your gf but you still think of your ex