Wow 🤩 when I save enough to upgrade to a killer rig like yours would you be open to letting me ask you what you’d do different or maybe change? Thank you for sharing
What's the deal with cleansol or one restore, will it strip paint off aluminum window frames and gutters if you leave it on too long? Thank you for your content!
Thanks for the video. Have you tried just using the Cleansol without using SH first? It too removes organics which will save even more time than you already are.
Yes sir. That’s part of their whole gig is to make products that eliminate the use of SH. Cleansol BC is a cool product. One Restore is even cooler lol.
I’ve used bccleansall to try and remove oxidation with mixed results. It actually makes things look worse than better when it comes to oxidation and that’s what it supposed to be used for. If stucco siding is not oxidized will it cause blotchiness or discoloration? Will it mess up windows and or aluminum frames? I usually pre-wet those and rinse right away but I’m nervous about causing problems with this product. I still have a brand new 5 gallon bucket of it sitting in storage
AGREED! I've used Cleansol BC, one restore, hd britenol, ALL crappy results. When I talk to Eaco Chem he says "oh well you need to use our other product for that particular stain" so I purchase that product, wash and repeat until I finally decided I'm going back to SH, muriatic and oxalic acid, and degreasers as needed. Their products cause too much damage to surrounding surfaces Even when prewetting and rinsing off quick. And we do not tape off every individual different substrate. Complete nightmare experience on 4 separate jobs. We saw ZERO positive results and that's with following the VERBAL application methods. Oh we were last told to use Vintage for some stucco stains that were caused from gutter and roof runoff. Every scenario had a reason why we needed "their other product". We gave up trying to locate Vintage locally even though we were told that their block customer carries it. They had no idea what we were talking about. Those products are NOT good for Houston, Texas properties for sure.
If I could delete, I would. However, there's an update to my last rant. We have had some recent success with their products including cleansol bc. It's all about the dilution, believe it or not, sometimes a stronger mix doesn't clean a surface as well as a diluted mix (go figure) so strong is not always better. Cleansol has gotten us through some stucco cleanings that sh couldn't. Furthermore, my previous comment referenced Vintage but Heritage is the correct name. As of today we are still unable to find/buy it.
Holy Shit This Is Badass. Nicest setup and Information I Have Seen on RUclips in a Long Time. STRAIGHT TO THE POINT NO LONG STORY BULLSHIT
I like your style brother, big pumps, big water, big truck & overbuilt everything.. might aswell be a fire truck the way you rollin 👊
I just came across your channel and subscribed! Great information thank you for sharing. Looking forward to future videos
It looks like you have different valves than the GF valves for SH and H20 as well as different sizes. Could you explain this set up? Thank you.
That’s so awesome. Thanks for sharing that knowledge
Would’ve liked to seen the finished product
Wow 🤩 when I save enough to upgrade to a killer rig like yours would you be open to letting me ask you what you’d do different or maybe change? Thank you for sharing
Great video - lots of information
That is 1 hell of a pump
That was awesome. Brother.... you're the King of Pressure Washers : )
Thanks 👍
That's amazing rig
Cleansol is a life saver
What's the deal with cleansol or one restore, will it strip paint off aluminum window frames and gutters if you leave it on too long? Thank you for your content!
Can you do a rig video. That thing is nasty bro
Are you diluting your Cleansol BC or are you using your meter to do that?
Metering it
Is that one Gould's booster pump thanks
..the "BIG DOG"" pressure washing! Thx
What do use to neutralize sh after a house wash?
Thanks for the video what type of soap do you use also is that a 7 gallon per minute 12 volt Thanks
Ya ok.... 2hp 240v 10gpm booster
@@thepressurewasherschannel9109 🤣🤣🤣
How come you didn't use the soaker gun to apply the cleaners?
What pump you running I've been looking for one around 150 psi I have a 80 psi now
Save your money I’ll have one available for Shell during the year
@@thepressurewasherschannel9109 is your pump out yet? Look forward to it
No
So you have mixed you BC its not the concentrate? in a 7 gal tank?
Wish we got to see the before and after
Thanks for the video. Have you tried just using the Cleansol without using SH first? It too removes organics which will save even more time than you already are.
Really !!!!! This was a truck transfer station, it was a lot of fallout from the trucks
Yes sir. That’s part of their whole gig is to make products that eliminate the use of SH. Cleansol BC is a cool product. One Restore is even cooler lol.
I was just busting on you, sh is always the go to, it’s cheaper then bottle water
What size hose are you running off that booster? Looking to create a similar setup.
5/8
FYI it’s Cleansol BC
Hoooly hannah brother. That is some professional shit. Cant wait for our party day down here in Lancaster!
I get the feeling you're more than a weekend warrior..lol
Scared money don’t make money. Probably a 8-10k job with a 25k set up.
R u saying my rig is a 25k setup
Definitely NOT a 8-10k job
where ca i find the 3 ways you use for your various soaps?
Us plastics
@@thepressurewasherschannel9109 ty
Do you worry about all of the electrical on these commercial jobs?
no
Through your metering system what ratio are you pulling 1-3% kinda thing?
I spray hot, sh is cheaper then bottled water roofs 50-50 houses 2-5
I’ve used bccleansall to try and remove oxidation with mixed results. It actually makes things look worse than better when it comes to oxidation and that’s what it supposed to be used for. If stucco siding is not oxidized will it cause blotchiness or discoloration? Will it mess up windows and or aluminum frames? I usually pre-wet those and rinse right away but I’m nervous about causing problems with this product. I still have a brand new 5 gallon bucket of it sitting in storage
AGREED! I've used Cleansol BC, one restore, hd britenol, ALL crappy results. When I talk to Eaco Chem he says "oh well you need to use our other product for that particular stain" so I purchase that product, wash and repeat until I finally decided I'm going back to SH, muriatic and oxalic acid, and degreasers as needed. Their products cause too much damage to surrounding surfaces Even when prewetting and rinsing off quick. And we do not tape off every individual different substrate. Complete nightmare experience on 4 separate jobs. We saw ZERO positive results and that's with following the VERBAL application methods. Oh we were last told to use Vintage for some stucco stains that were caused from gutter and roof runoff. Every scenario had a reason why we needed "their other product". We gave up trying to locate Vintage locally even though we were told that their block customer carries it. They had no idea what we were talking about. Those products are NOT good for Houston, Texas properties for sure.
If I could delete, I would. However, there's an update to my last rant. We have had some recent success with their products including cleansol bc. It's all about the dilution, believe it or not, sometimes a stronger mix doesn't clean a surface as well as a diluted mix (go figure) so strong is not always better. Cleansol has gotten us through some stucco cleanings that sh couldn't. Furthermore, my previous comment referenced Vintage but Heritage is the correct name. As of today we are still unable to find/buy it.
Heritage restore is one of my top chems in the box
@@thepressurewasherschannel9109 is it super safe? Like used on glass and metal and not ruin stuff?
what percent are you using on the metering valve for Bc? Thank you
Just keep turning it up until you see a change
Very nice, what size booster?
26 stage booster
What size tubing do you use for your soap and bc?
3/8
@@thepressurewasherschannel9109 ty
Your bc tank is it first mixed at a 4 to 1 then you downstream and at what setting to get it close to 20to1 or 10to1 ratios from there?
No, straight & I don’t downstream, booster with mixing valve
@@thepressurewasherschannel9109 so in your holding tank its a 100% bc? And if so, what do you set it to for a metal roof on the valve?
Sorry to bother you but you are the only one that I have seen apply bc this way. Some details would be greatly appreciated.
Every system is different, I just adjusted to my desire
Have you ever used clensol bc to clean wood?
Yes
@@thepressurewasherschannel9109 work better then sh or the others?
You can’t be SH, it’s cheaper than water
@@thepressurewasherschannel9109 yeah just not good for wood. Bleaches it. Woods an organic.
Then spray ox afterwards, I am not in the business of restoring decks I just clean them neutralize it and then let someone else worry about the rest
Can you wash a 2 story roof from the ground with this?
All day
@@thepressurewasherschannel9109 sweet have you done it?
3 story when no wind, 15gpm, I have no ladders on my rig
15 gallon a min wow never heard anyone with that many gpm
Where did you buy the white Box from
What white box
Did u make ur own set up or buy it thank u
All custom, Nobody really makes a good production equipment
What kinda booster do you have I’d like order one
Custom … I am designing a gas powered booster approx 12g’s
What tips do you have and what's that h hookup
It’s a GP soaker gun
What percent of BC Cleansol?
100% in soap tank then mixed through mixing valve to desired strength
@@thepressurewasherschannel9109 Hi what % ratio did you use to clean that wall? 20:1 10:1 4:1 ?? Thanks for the video & information!!
Where can I find that soaker gun ?
J&N equipment
What booster is that
Goulds
Where can I purchase a soakers gun
Ask Amazon
Daddy:)
must be nice to have money
Yes it is !!!!!💰💰💰💰
You have to spend money to make money...and know your value...
And price your jobs accordingly 👍🏻
What would you use to do windows touchless?