TP Link EAP225 AP 500 Meters Long Range Deployments

Transform your connectivity with the TP-Link EAP225 Access Point for long-range deployments! In this comprehensive guide, we'll walk you through the setup process to extend your WiFi coverage up to an incredible 500 meters. Understand the importance of a Long Range PoE Switch in maintaining power and data integrity over extended distances, ensuring your network operates smoothly.
0:00:00 Brief Introduction to TP-Link EAP225 Access Point
How to Set up EAP225 over a 500-meter Long Range?
Daisy-Chaining PoE Extenders
Introduction to Long-Range PoE Switch
Installation Process of 500m EAP225 AP
24V Passive PoE Long Range Setup Explained
Here is the product you can see in the video
www.fastcablin...
If you need any assistance with your project, please feel free to contact us here: www.fastcablin...
Here is our solution page:
www.fastcablin...
Also, find FASTCABLING here:
------------------------------------
Facebook Page. / fastcabling
Twitter. / fastcabling
LinkedIn. / fastcabling

[@tts7786]

What would happen if you stick a normal cable instead of your special jumper cable? Would it simply just not work or would it damage the device?

[@Fastcabling]

Then the device will not turn on. The long-range PoE switch uses 4-pair PoE technology, while TP-Link EAP225 can only work with 802.3af or 24V passive PoE, which causes compatibility issues. For more information, please see this video 👉ruclips.net/video/mUWJ_lbMt8U/видео.html

[@yifengchen5274]

speed/bandwidth vs distance data table? did you test it?

[@rubenguerrajr5833]

I want to attach a total of 3 eap225 outdoors. I know I won’t be close to 500m but maybe I should go down to 2 eap’s? The other thing, how do I connect #2 and or #3 to #1?

[@Fastcabling]

We have developed an 8-port long-range PoE+ switch that has 4 long-range PoE ports (ports #1-4). www.fastcabling.com/product/800m-8-port-long-range-poe-switch/
The TP-Link EAP225 supports Mesh networking. You can set the EAP #1 as the main AP. Connect it directly to your network (router or switch) using an Ethernet cable. Then place EAP #2 and EAP #3 at strategic locations where they can maintain a strong connection to EAP #1. They will wirelessly connect to EAP #1 and relay the signal to cover a larger area.

[@davincismith6566]

I have a similar problem with eap 225 outdoor but they aren’t 500 meters apart, only 50m apart but they keep disconnecting. How do I fix that?

[@Fastcabling]

If the EAP225 units are too close and transmit power is set too high, they may be oversaturating the signal.

[@doxiemamazakie1746]

wow thank you so much i need this... link please where buy?

[@Fastcabling]

www.fastcabling.com/product-category/long-range-poe-switches/

[@innocentnek]

Thank you madam one video share that how we can combine two ADSL line in device to make speed double

[@Fastcabling]

Combining two ADSL lines to double your speed is a bit tricky because ADSL itself doesn’t support native bonding of multiple lines for increased bandwidth. However, you can achieve a similar effect using a technology called Multi-link PPP (MLPPP) or by employing Load Balancing techniques.

[@KNOWLEDGEHUNTERboy]

It is good but the problem is the speed of the long range poe switch. It is only 100mbps while eap225 is a gigabit port.

[@Fastcabling]

You can use the 300M Gigabit PoE extender kit which can transmit data up to 300 meters while maintaining a high speed of 1Gbps.

[@fredericklegaspi1153]

wokrs but you only get 10mbps of speed

[@Fastcabling]

The long-range PoE+ switch can support a speed of 100Mbps over a distance of 500 meters (a POE extender must be added). If you're looking for higher speeds, you can use the Gigabit PoE extenders instead. ruclips.net/video/j3yRf0Chjvg/видео.html