Да уж. Литье одно чего стоит, раковин и включений в металл полно, из формы выбивает, когда еще заготовка не остыла. ОТК проверка- удар шлепком при упаковке...
You know....I really do enjoy this channel. It's quite interesting watching industrial production from the Middle East. However, I cannot stand American liberals crying about how much better we need to be about the environment. In. America. We have some of the strictest production standards in the world. Then I watch this and think, everyone one there is getting cancer and those noxious fumes are going straight into the atmosphere.
why is it amazing ,,, is it that they dont die from the fumes , pouring molten brass while wearing flip flops ,,, ,, or that they still have limbs left , or that the job done for pennies in the pound ,, its not amazing , its disgraceful .
I spent 37 years in a oil refinery. I wish I had a dollar saved for every one of these kind of check valves I have installed. Water for cooling systems mostly. Petroleum products using brass is a hazard don't use it. In case of a flash fire. Brass melting point is low. You can put out a fire quick enough with steel components that you won't have a ruptured line with a bigger fire. And I have fought some fires it always scared the c@@p out of me. Over that 37 years we lost Two men due to fire !
kinda feel sorry for the work conditions these people have to endure, pretty bad and not very safe! But I guess that is more or less the norm for small manufacturing business' in that part of the world...
I used to work at one of the last two rough brass valve manufacturers in the US and made a product very similar. It was an interesting watch ass our methods were very different but we did so with a much higher volume.
It continues to amaze me to see the range of things manufactured by guys in sandals crouching on dirt floors. Workbenches are apparently a foreign concept to them though.
@@slisser Does it actually effect us in the west? I would have thought most of this stuff is for local consumption? So much simply wouldn’t meet western standards? Cheers
i worked for 20 years in the manufacture of plumbers fittings all machined to close tolerances and go and not go gauges for bores and threads there is no evidence of close working here so if it fits and works it's ok.
It is not gate valve, but check valve, swing type.
Да уж. Литье одно чего стоит, раковин и включений в металл полно, из формы выбивает, когда еще заготовка не остыла. ОТК проверка- удар шлепком при упаковке...
ой хейтерок, бронза отлично льётся
Качество максимального уровня! Хоть и кустарно. А все эти порошковые европейские краны, сплошное убожество.
You know....I really do enjoy this channel. It's quite interesting watching industrial production from the Middle East. However, I cannot stand American liberals crying about how much better we need to be about the environment. In. America. We have some of the strictest production standards in the world. Then I watch this and think, everyone one there is getting cancer and those noxious fumes are going straight into the atmosphere.
Thanks so much for your kind response
Pakistan is not Middle East
Очень полезные видео. После ядерной войны, по ним можно будет восстановить цивилизацию.
why is it amazing ,,, is it that they dont die from the fumes , pouring molten brass while wearing flip flops ,,, ,, or that they still have limbs left , or that the job done for pennies in the pound ,, its not amazing , its disgraceful .
NO! Stop telling the truth!
Oh, you must be one those "non-paid" commenters.
А мы пакупаем и думаем, почему это Говно трескается и течёт?!
Руки оторвать за такое!
пакупи сибе букварь
That is NOT a gate valve, it is a check valve.
That's the first thing I noticed.
I spent 37 years in a oil refinery. I wish I had a dollar saved for every one of these kind of check valves I have installed. Water for cooling systems mostly. Petroleum products using brass is a hazard don't use it. In case of a flash fire. Brass melting point is low. You can put out a fire quick enough with steel components that you won't have a ruptured line with a bigger fire. And I have fought some fires it always scared the c@@p out of me. Over that 37 years we lost Two men due to fire !
Yea that a one way valve , mistake by that guy
Indian me isko NRV .Non Return Valve bolte hai lekin NRV ki Thred inside Ander hoti hai
kinda feel sorry for the work conditions these people have to endure, pretty bad and not very safe! But I guess that is more or less the norm for small manufacturing business' in that part of the world...
The guy running the furnace is wearing a UAW union t shirt. 🤣🤣🤣
Похоже на обратный клапан, но такая конструкция мне не встречалась.
Эта система Ниппель в одну сторону дуй в другую х..й
Bugatty
Она и не встретится, всё завалено китальянскими, каждый второй рабочий.
Does not a single person own a pair of boots in this country? That's what they need to start manufacturing
If casting with our die casting machine, the efficiency will be greatly improved.😁
Check Valve. Did not see the seat being machined.
With the fittings supplied, looks like it is for low pressure or irrigation applications.
I used to work at one of the last two rough brass valve manufacturers in the US and made a product very similar. It was an interesting watch ass our methods were very different but we did so with a much higher volume.
1:33 He is wearing a United Auto Workers tee shirt, my guess he is NOT getting Union wages! 🤣
It continues to amaze me to see the range of things manufactured by guys in sandals crouching on dirt floors. Workbenches are apparently a foreign concept to them though.
lots of asian countries dont use tables in general either for working or eating
So absolutely right! Incredible...that they keep their toes?
Yes My dear they live like that so You can live as You live.
@@slisser Does it actually effect us in the west? I would have thought most of this stuff is for local consumption? So much simply wouldn’t meet western standards? Cheers
Yes mostly workers prefer to squat on the ground, with the work pieces kept in front
Low quality import junk valves. Metallurgy is crap, tolerances are crap, so many better choices on the market with better quality
Где применимо?
В скважинах, колодцах при заборе воды насосом расположенном наверху. Если конечно они работоспособны.
Kon si jagah par industry hai
Zero safety precautions from the beginning to the end.. it's a pity
Awful sample of work safety.
It is called a flap valve, reverse motion. Anaerobic sealant from the sealant. Disposable product. Average quality. For 25 mm polypropylene pipes
and Chinese goods are not needed. Because there is no corruption and there is production. well done
NOT A GATE VALVE, IT IS A ONE WAY CHECK VALVE!
ê sappa mày khởi công xây sân bay ảo bằng cột trúc chưa... 😂😂😂 ko có tiền đừng có nổ
From what sand is the core made, and with heat it becames solid
As it is mentioned below, it is not a gate valve, but a one-way check valve.
That's not a gate valve. It's a check valve.
I wonder why they always work on the floor, that there are no tables there in that country???🙂
That’s a non return check valve!
i worked for 20 years in the manufacture of plumbers fittings all machined to close tolerances and go and not go gauges for bores and threads there is no evidence of close working here so if it fits and works it's ok.
Не дай бог в из руки попадут современное оборудование или завод . Они захватят мир
This is not a Gate Valve, this is called Swing Check Valve.
I think this is a low tech unidirectional flow valve. swing check works with flow pressure. This valve just allows flow in one direction.
心情非常不好！很复杂！无人可分享！在这个英语节目中，说一下，我知道没人看得明白！人生好难熬啊！感情真的很累的！
Not a gate valve but a non return valve.
Killer boss, unhealthy environment and lack of safety equipment.
As usual everything is dropped on the floor! Imagine the voids in the metal
It would be tossed as scrap and remelted with the gates and sprues. I was a little amazed at how quickly they broke open the molds.
Love the safety equipment.
As long as it’s not made in China I’ll buy it👌🏿
Is forging more suitable for this size components...we will get good grain structure and strength
i like how the guy is wearing a union shirt. if hes part of a union over there then unions are still useful over here 😆😆😆
That is NRV - None Return Valve
Quality Control guy did an excellent job, outstanding team work
Couldn't find the "amazing" part anywhere, must have missed it in all the excitement! 😂
Hot water brass check vavle
Lathe work with thread cutting was impressive.
По мне клапан хороший
Хороший, блястючий. Да ещё и собран не на голой земле а на почти чистом полу, премиум класс короче.
bhai yeh kis city my tayaar hoti hai
ब्रास डायमेकर्स कोन है ? हमें डाय बनवानी है.
я вот думаю,на хрена я покупаю это дерьмище одноразовое?может самому делать всё что нужно.наковырял хлама на помойке,а дальше технология то простая.
Станок нужен , такой же столетний. Да и в чистом гараже так не получится, нужны крайне ужасные условия.
Excelente video colega que opinan de este ruclips.net/video/4heA7Hdy1g0/видео.html
А потом пишут made in Italy
или germany🤣🤣🤣
Пришлось немного поработать в литейном цеху.
Муляж фурнитуры
Fantastic speed good craftsmen & castings.
Those are check valve not gate valve
Outstanding job !! Much respect to these men 👍✌️
Informative Nice Video ... hardwork .. good labor
Долгих лет жизни!
Oh my gosh, OSHA field day if this was in the US.
Maine ye kaam karta hu kaam ho to bataye
tz tz, not only a bench ...
Its called check valve
Wonder what the lead content is?
Мужики? А перчатки? Техника безопасности?
В перчатках жарко. Да они чугун в сланцах льют, суровые как Челябинцы короче.
Working without gloves?? cool
or is it uncomfortable to working??
Hello friend , we recommend our DC 300T cold chamber die casting machine to you.
Kaha par hai sir
They really need to make chairs n benches to save squatting down all day
why?
@@superjojo555 so you think its normal to just chuck the stuff that is made on the floor, and not have any semblance of order !!
@@delboytrotter7902 you can still be orderly without a bench or chairs?
@@superjojo555 i was always told you can never argue with an idiot.....you proved that saying right
@@superjojo555 Then why aren't these people?
Где звук?
Risky
The open-toe "safety" sandals are most definitely Osha approved! Supreme high quality "garbage" parts!
I would love to work close to other guy who swing around cup with molten brass behind my back 😅😅
@@adriankowalski5492 still safer than US schools 😛
Дымок с цинком такой пользительный для нутра !
это бронза 😂, металл такой, цинк у тебя в ведре в туалете, а это бронза, не путай с брынзой - это сыр !
@@GoldPenis18cm Клоунуха , что хотела сказать то ? Тебя твой господин назвал " любимой женой " ? Вазелин купи .
но брынца это творог, очень полезен для нутра )
nice job
Ужас в какой грязи они работают?.......
Что это?
обратный клапан
Пиздц нах блэать это.
Не очень тонкие стенки?
Бомба 💣💣💣👍👍👍
I respect everyone who were involved in this Seriously the best piece that i ve ever seen on RUclips 💌 Hate off to well all 💟 love your videos
👍👍👍👍👍 nice vidéo buddy !!!
This is chack valve/NRV
Enjoyed your video and so I gave it a Thumbs Up
Excelente vídeo meu amigo 👏
Great informative video
The Engineers are very skilled
Engineers? :)
Very nice! The casting process was quite satisfying.
Well made check valves.
Not interested in this .....
Aapan number send karo please sir
Address toh batao...